627387
26
Zoom out
Zoom in
Previous page
1/64
Next page
Record mode
26
VQT0N43
Quick start
This camera will be put into standby in approx.
1.7 seconds after the power is turned on.
This is only activated in the following cases.
A tape or a card is inserted, while the Tape
Recording Mode is set.
A card is inserted, while the Card Recording
Mode is set.
1 Press the [QUICK START] button.
The quick start recording lamp lights up.
(Press the button again to cancel it.)
2 Set the [OFF/ON] switch to [OFF].
The quick start is now ready.
3 Set the [OFF/ON] switch to [ON].
This camera will be put into a recording
pause in approx. 1.7 seconds after it is turned
on.
ª
To cancel the quick start when the
power is [OFF]
Press and hold the [QUICK START] button for
approx. 2 seconds. The lamp will go off and the
camera will be completely turned off.
If the standby continues for approx. 30 minutes,
then the lamp will go off and the camera will be
completely turned off.
When you rotate the mode dial or remove the
battery, the quick start recording lamp is turned
off and the quick start mode is cancelled. If the
movie camera is turned on and the Tape/Card
Recording Mode is set though, the lamp turns
on and the quick start mode is restored.
When the camera is quick-started with the white
balance on automatic, it may take some time
until the white balance is adjusted if the scene
being recorded has a light source different from
the scene last recorded. (When the colour night
view function is used, however, the white
balance of the scene last recorded is retained.)
The zoom magnification may differ from when it
is in the quick start standby mode and when the
recording starts.
Since about half the power of normal recording
is used in quick start standby, using quick start
reduces the recordable time.
Backlight compensation function
This protects a backlit subject from being
darkened.
Set to Tape/Card Recording Mode.
1 Press the joystick until the icon 1 appears.
2 Move the joystick right to select the
backlight compensation icon [ ].
The image on the screen will become
brighter.
ª
To return to normal recording
Select the [ ] icon again.
If you operate the [OFF/ON] switch or the mode
dial, the backlight compensation is cancelled.
START
QUICK
OFF
ON
POWER
ª
1
GS150_140EB.book 26 ページ 2004年11月27日 土曜日 午後4時55分
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGS150EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGS150EB in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NVGS150EB

Panasonic NVGS150EB User Manual - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info