627373

Panasonic NVEX21B Manual

49
Zoom out
Zoom in
Previous page
1/60
Next page
ª Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback multi-mode screens cannot be output through the
DV Terminal or Digital Still Picture Terminal.
≥If there is input from the DV Terminal, a multi screen
cannot be created.
≥When signals are input from the S-Video Input/Output
Socket or Audio-Video Input/Output Socket, a multi screen
cannot be re-displayed.
≥Signals input from the S-Video Input/Output Socket or
Audio-Video Input/Output Socket cannot be displayed on a
multi screen.
≥If you switch the Movie Camera from the Index Multi-
Picture Mode over to the Camera Mode, the setting of
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
ª Audio Dubbing
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be dubbed.
≥If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop Function (l 56), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥In the case of importing data recorded with Audio Dubbing
to a PC using the PC’s software programme, only the
original sound (ST1) may be imported, depending on the
software programme.
ª Recording the Contents of Other
Equipment
Recording to a Card
If you set the [TAPE/CARD] Selector to [CARD] and set the
[PICTURE/MPEG4/VOICE] Selector Switch to [PICTURE] or
[MPEG4], you can record for external input signals.
≥When using the Battery Adaptor Unit, you can not record
the contents of other equipment.
≥Black streaks may appear at the 4 edges of the image.
≥If the [PICTURE/MPEG4/VOICE] Selector is set to
[VOICE], recording to a card is not possible.
To Record Picture:
1
After Playing back the contents of external
equipment, press the [PHOTO SHOT] Button.
≥While recording with analog input, a card photoshot cannot
be used.
≥The picture size recorded from an external input or a tape
is [640t480]. (It is not a mega pixel still picture recording.)
≥When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
To Record Moving Picture (MPEG4):
1
After playing back the contents of external
equipment, press the start/stop Button.
Analog-Digital Conversion
≥When the Movie Camera is connected with other digital
video equipment through its DV Terminal, images recorded
in analog form from other external equipment can be output
to the digital video equipment through the DV Terminal.
≥To DV-output analog video signals sent from other
equipment, set [DV OUT] on the [AV IN/OUT SETUP]
Sub-Menu to [ON]. (Normally, keep the [DV OUT] set to
[OFF]. If it is set to [ON], the quality of the image may be
disturbed.)
ªUsing the DV Cable for Recording
(Digital Dubbing)
≥Regardless of the setting, digital dubbing is carried out
automatically in the same audio recording mode as that of
the Cassette on the playback-side.
≥The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
≥Even if Playback Digital Effects, Playback Zoom, or
Playback Title In have been used, these effects are not
output from the DV Terminal.
≥Even if you use device equipped with DV Terminals (such
as i.LINK), you may not be able to perform Digital Dubbing
in some cases.
ªAbout the Battery Adaptor Unit
≥To protect the internal electric circuit and the data on the
Memory Card, attaching/removing the Battery Adaptor Unit
is invalid when Movie Camera Off/On Switch is set to on.
≥It is not possible to use the Battery Adaptor Unit only.
≥It is possible only the operation for Card.
≥When attaching the Battery Adaptor Unit, the Microphone
on the Movie Camera becomes unavailable and the
Microphone on the Battery Adaptor Unit operates. (The
Microphone becomes monaural.)
≥When removing, be carefull not to drop the Camera Unit
and the Video Unit by holding them tight.
≥Do not attach the Battery while the Battery Adaptor Unit or
the Video Unit is removed from the Camera Unit.
≥The Remote Controller cannot be used when the Battery
Adaptor Unit is used.
≥Wind Cut Function cannot be used when the Battery
Adaptor Unit is used.
ªRecording on a Card
≥The Shutter Effect cannot be used.
≥If [NORMAL] or [ECONOMY] is selected for recording,
mosaic-pattern noise may appear on a playback image
depending on the image content.
≥During automatic copying tape on a card, the number of
pictures that can still be recorded on the Card is displayed.
When it becomes [0], the Tape is set to the Recording
Pause Mode.
≥Pictures with wide-screen format signals cannot be copied.
≥The size of the Picture recorded from Tape to Card is
[640t480].
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVEX21B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVEX21B in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info