627364
86
Zoom out
Zoom in
Previous page
1/116
Next page
DEUTSCH ENGLISH
-86-
Setting the Date and Time
If you set [CLOCK SET] on the [DISPLAY SETUP] Sub-Menu
of the [VCR FUNCTIONS] or the [CAMERA FUNCTIONS]
Main-Menu to [ON], the menu shown above appears.
For example: To set the clock to 15th October 2000,
14:30.
1 Turn the [PUSH] Dial to set to [2000].
The years change in the following order:
1990>1991>...> 2089>1990>...
2 Press the [PUSH] Dial to select [MONTH].
3 Turn the [PUSH] Dial to set to [10].
4 Press the [PUSH] Dial to select [DAY].
5 Turn the [PUSH] Dial to set to [15].
6 Press the [PUSH] Dial to select [HOUR].
7 Turn the [PUSH] Dial to set to [14].
8 Press the [PUSH] Dial to select [MIN.].
9 Turn the [PUSH] Dial to set to [30].
10 Press the [MENU] Button to finish the date
and time setting.
The operation of the clock starts from [00] seconds.
Pressing the button one more time makes
the menu disappear.
As the time of the Movie Cameras built-in clock is subject to
a slight imprecision, be sure to check the time before
recording. If the flashing [0] Indication appears, charge the
built-in battery (l 87) and set the date and time again.
The clock employs the 24-hour system.
Einstellen von Datum und Uhrzeit
Wenn Sie [CLOCK SET] im Untermenü [DISPLAY SETUP]
des Hauptmenüs [VCR FUNCTIONS] oder [CAMERA
FUNCTIONS] auf [ON] einstellen, erscheint das oben
gezeigte Menü für die Datum- und Uhrzeit-Einstellung.
Beispiel: Einstellen der Uhr auf 15. Oktober 2000,
14:30 Uhr
1 Den Regler [PUSH] drehen, um auf [2000]
einzustellen.
Die Jahre wechseln in folgender Reihenfolge:
1990>1991>...>2089>1990>...
2 Den Regler [PUSH] drücken, um [MONTH]
(Monat) zu wählen.
3 Den Regler [PUSH] drehen, um auf [10]
einzustellen.
4 Den Regler [PUSH] drücken, um [DAY] (Tag)
zu wählen.
5 Den Regler [PUSH] drehen, um auf [15]
einzustellen.
6 Den Regler [PUSH] drücken, um [HOUR]
(Stunde) zu wählen.
7 Den Regler [PUSH] drehen, um auf [14]
einzustellen.
8 Den Regler [PUSH] drücken, um [MIN.]
(Minute) zu wählen.
9 Den Regler [PUSH] drehen, um auf [30]
einzustellen.
10 Die Taste [MENU] drücken, um das Einstellen
von Datum und Uhrzeit zu beenden.
Die Uhr läuft an von [00] Sekunden.
Wenn die Taste erneut gedrückt wird, verschwindet das
Menü.
Da die Zeit der im Camerarecorder eingebauten Uhr u. U.
nicht präzise ist, diese vor dem Aufnahmebeginn überprüfen.
Falls die blinkende Anzeige [0] erscheint, die eingebaute
Batterie (l 87) aufladen und das Datum und die Zeit
einstellen.
Die Anzeige der Uhr erfolgt im 24-Stunden-System.
AUTO
AUTO
MNL
MENU
FOCUS
SHUTTER/IRIS
MF/VOL/JOG
PUSH
10
1– 9
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS990EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS990EG in the language / languages: English, German as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info