627364
74
Zoom out
Zoom in
Previous page
1/116
Next page
DEUTSCH ENGLISH
-74-
Copying with the Help of an Editing
Controller
If you connect the Movie Camera to an Editing Controller
equipped with 5-pin Edit Socket, this Movie Camera’s
playback functions can be controlled from the Editing
Controller.
(The Output Terminal Box [AV ONE TOUCH STATION] is
necessary.)
After connecting all equipment as shown above,
perform the necessary operations.
When Connecting the Editing Controller
VW-EC500E
1 (optional)
A VCR equipped with 5-pin Edit Socket is necessary.
When you connect the VW-EC500E to the Movie Camera,
an adjustment on the VW-EC500E is necessary. For the
operation of the Editing Controller, refer to its operating
instructions.
When Editing with Time Code
Set [DISPLAY] on the [DISPLAY SETUP] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu to [TIMECODE] to make the
Time Code appear.
When the Time Code is displayed, the Time Code Signal is
output from the Edit Socket.
When the Counter Indication is displayed, the Linear Tape
Counter Signal is output.
2 To Edit Socket
3 Edit Socket
4 Connect the AC Adaptor.
5 VCR (not supplied)
6 To Edit Socket
7 TV (not supplied)
8 21-Pin Adaptor
Kopieren mit Hilfe einer
Schnittsteuereinheit
Wenn Sie den Camerarecorder an eine Schnittsteuereinheit
anschließen, die mit 5poliger Edit-Buchse ausgestattet ist,
nnen Sie die Wiedergabe-Funktionen dieses
Camerarecorders von der Schnittsteuereinheit aus steuern.
(Die Anschluß-Box [AV ONE TOUCH STATION] ist ebenfalls
notwendig.)
Nach dem Anschließen aller Geräte auf oben
gezeigte Weise die nötigen Bedienungen
durchführen.
Beim Anschließen der Schnittsteuereinheit
VW-EC500E
1 (Sonderzubehör)
Ein Videorecorder mit 5poliger Edit-Buchse ist notwendig.
Wenn Sie die Schnittsteuereinheit VW-EC500E an den
Camerarecorder anschließen, muß an der VW-EC500E eine
Justierung durchgeführt werden. Nähere Einzelheiten zur
Justierung und die sonstige Bedienung der
Schnittsteuereinheit können Sie ihrer Bedienungsanleitung
entnehmen.
Beim Editieren mit Timecode
[DISPLAY] im Untermenü [DISPLAY SETUP] des
Hauptmenüs [VCR FUNCTIONS] auf [TIMECODE] einstellen,
damit der Timecode eingeblendet wird.
Wenn der Timecode angezeigt ist, wird das Timecode-Signal
von der Edit-Buchse ausgegeben.
Wenn das Bandzählwerk angezeigt ist, wird das
gewöhnliche Echtzeit-Bandzählwerk-Signal ausgegeben.
2 An die Edit-Buchse
3 Edit-Buchse
4 Den Netzadapter anschließen.
5 Videorecorder (nicht mitgeliefert)
6 An die Edit-Buchse
7 Fernsehgerät (nicht mitgeliefert)
8 21poliger Adapter
8
6
[AUDIO IN]
[VIDEO IN]
[S-VIDEO IN]
1
V
2
3
4
7
5
R
-
AUDIO OUT
-
L
VIDEO OUT
S-VIDEO OUT
[S-VIDEO OUT]
[AUDIO OUT]
[VIDEO OUT]
EDIT
D
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS990EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS990EG in the language / languages: English, German as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info