627364
18
Zoom out
Zoom in
Previous page
1/116
Next page
ENGLISH
DEUTSCH ENGLISH
-18-
Aufnehmen
Nach Umschalten des Schalters [POWER] auf [CAMERA] und
Einstellen des Modus-Wahlschalters auf [AUTO] können Sie
ganz einfach durch Drücken der Start-/Stopp-Taste mit dem
Aufnehmen beginnen. Der Camerarecorder erledigt dabei die
Scharfeinstellung und den Weißabgleich vollständig
automatisch.
Je nach Aufnahmesituation und Beleuchtung sind korrekte
automatische Scharfeinstellung und Weißabgleich u. U. nicht
glich. In solchen Fällen sollten Sie diese manuell
durchführen.
Scharfeinstellung: (l 53); Weißabgleich: (l 51, 52)
1 Den Schalter [POWER] auf [CAMERA] stellen.
Beim Schieben auf [CAMERA] den Knopf 1 im Schalter
gedrückt halten.
2 Die Start-/Stopp-Taste drücken.
Die Aufnahme beginnt.
Die Anzeige [RECORD] erscheint kurz und wechselt
dann auf [REC] 2.
Zum Umschalten auf Aufnahmepause:
Die Start-/Stopp-Taste erneut drücken.
Die Anzeige [PAUSE] erscheint 3.
Zum Beenden der Aufnahme:
Den Schalter [POWER] auf [OFF] stellen.
Es ist nicht nötig, den Knopf im Schalter zu drücken, wenn sie
den Schalter auf [OFF] schieben.
Immer zuerst den Objektivdeckel abnehmen, bevor Sie den
Schalter [POWER] auf [CAMERA] stellen. Andernfalls ist die
automatische Weißabgleich-Einstellung (l 99) u. U. nicht
präzise.
Wenn Sie den Camerarecorder länger als 6 Minuten im
Modus Aufnahmepause lassen, schaltet er sich
automatisch aus, um das Band zu schützen und
Akkustrom zu sparen. Um aus diesem Zustand erneut
aufzunehmen, den Schalter [POWER] zuerst auf [OFF]
und dann wieder auf [CAMERA] stellen.
Aufnahmeanzeigelampe
Die Aufnahmeanzeigelampe 4 leuchtet während der
Aufnahme, damit Ihre Akteure vor dem Camerarecorder
wissen, wann die Aufnahme läuft. Wenn Sie [REC LAMP] im
Untermenü [OTHER FUNCTIONS] auf [OFF] einstellen,
leuchtet die Aufnahmeanzeigelampe nicht mehr.
Recording
After setting the [POWER] Switch to [CAMERA] and the Mode
Selector Switch to [AUTO], you can simply press the Start/
Stop Button to start recording. In this case, the Movie Camera
adjusts the focus and white balance fully automatically.
Depending on the light source and recording situation,
correct automatic focusing and white balance adjustment
may not be possible. In such cases, adjust them manually.
Focus: (l 53); White Balance: (l 51, 52)
1 Set the [POWER] Switch to [CAMERA].
While pressing the centre button 1, slide the switch to
[CAMERA].
2 Press the Start/Stop Button.
Recording starts.
The [RECORD] Indication appears briefly and then
changes to [REC] 2.
To pause recording:
Press the Start/Stop Button again.
The [PAUSE] Indication appears. 3
To finish recording:
Set the [POWER] Switch to [OFF].
It is not necessary to press the centre button in order to slide
the switch to [OFF].
Be sure to remove the Lens Cap before setting the
[POWER] Switch to [CAMERA]. If the Lens Cap is attached
to the Lens when you set the [POWER] Switch to
[CAMERA], the automatic white balance adjustment (l 99)
may not be precise.
If you leave the Movie Camera in the Recording Pause
Mode for more than 6 minutes, it automatically switches
off to protect the tape and to conserve battery power. To
resume recording from this condition, set the [POWER]
Switch to [OFF] and then to [CAMERA] again.
Recording Lamp (Tally Lamp)
The Recording Lamp lights 4 during recording to let the
people in front of the Movie Camera know that recording is
being performed.
If you set [REC LAMP] on the [OTHER FUNCTIONS] Sub-
Menu to [OFF], the Recording Lamp does not light.
CAMERA
POWER
OFF
VCR
2
3
RECORD
PAUSE
REC
PAUSE
2
AUTO
AUTO
MNL
MENU
FOCUS
SHUTTER/IRIS
MF/VOL/JOG
PUSH
1
1
4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS990EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS990EG in the language / languages: English, German as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info