627273
17
Zoom out
Zoom in
Previous page
1/120
Next page
17
DEUTSCH
ENGLISH
2
3
RECORD
PAUSE
REC
PAUSE
1
AUTO
MNL
MENU
FOCUS
SHUTTER/IRIS
MF/VOL/JOG
PUSH
AUTO
2
4
CAMERA
VCR
MODE
ON
OFF
1
1
Recording
After setting the [OFF/ON/MODE] Switch to [ON] to turn the
Movie Camera on and setting the Mode Selector Switch to
[AUTO], you can start recording simply by pressing the
Recording Start/Stop Button. In this case, the Movie Camera
adjusts the focus and white balance fully automatically.
1 Set the [OFF/ON/MODE] Switch to [ON].
While pressing the centre button 1, slide the switch so
that [CAMERA] Lamp lights.
2 Press the Recording Start/Stop Button.
Recording starts. The [RECORD] Indication appears
briefly and then changes to [REC] 2.
To pause recording:
Press the Recording Start/Stop Button again.
The [PAUSE] Indication appears. 3
To finish recording:
Set the [OFF/ON/MODE] Switch to [OFF].
It is not necessary to press the centre button in order to slide
the switch to [OFF].
Depending on the light source and recording situation,
correct automatic focusing and white balance adjustment
may not be possible. In such cases, adjust them manually.
Focus: (l 52); White Balance: (l 50, 51)
Be sure to remove the Lens Cap before setting the [OFF/
ON/MODE] Switch to [ON]. If the Lens Cap is still attached
to the Lens when the [CAMERA] Lamp lights, the automatic
white balance adjustment (l 101) may not be precise.
If you leave the Movie Camera in the Recording Pause
Mode for more than 6 minutes, it automatically switches
off to protect the tape and to conserve battery power. To
resume recording from this condition, set the [OFF/ON/
MODE] Switch to [OFF] and then to [ON] again.
Recording Lamp (Tally Lamp)
The Recording Lamp lights 4 during recording to let the
people in front of the Movie Camera know that recording is
being performed. If you set [REC LAMP] on the [OTHER
FUNCTIONS] Sub-Menu to [OFF], the Recording Lamp does
not light.
Aufnehmen
Nachdem Sie den Camerarecorder durch Umschalten des
Schalters [OFF/ON/MODE] auf [ON] eingeschaltet und
anschließend den Modus-Wahlschalters auf [AUTO]
eingestellt haben, können Sie ganz einfach durch Drücken der
Aufnahme-Start-/Stopp-Taste mit dem Aufnehmen beginnen.
Der Camerarecorder erledigt dabei die Scharfeinstellung und
den Weißabgleich vollständig automatisch.
1 Den Schalter [OFF/ON/MODE] auf [ON] stellen.
Den Knopf 1 im Schalter gedrückt halten und ihn so
verschieben, daß die Lampe [CAMERA] aufleuchtet.
2 Die Start-/Stopp-Taste drücken.
Die Aufnahme beginnt.
Die Anzeige [RECORD] erscheint kurz und wechselt
dann auf [REC] 2.
Zum Umschalten auf Aufnahmepause:
Die Start-/Stopp-Taste erneut drücken.
Die Anzeige [PAUSE] erscheint. 3
Zum Beenden der Aufnahme:
Den Schalter [OFF/ON/MODE] auf [OFF] stellen.
Es ist nicht nötig, den Knopf im Schalter zu drücken, wenn sie
den Schalter auf [OFF] schieben.
Je nach Aufnahmesituation und Beleuchtung sind korrekte
automatische Scharfeinstellung und Weißabgleich u. U. nicht
glich. In solchen Fällen sollten Sie diese manuell
durchführen.
Scharfeinstellung: (l 52); Weißabgleich: (l 50, 51)
Immer zuerst den Objektivdeckel abnehmen, bevor Sie den
Schalter [OFF/ON/MODE] auf [ON] stellen. Falls der
Objektivdeckel noch am Camerarecorder angebracht ist,
wenn die Lampe [CAMERA] leuchtet, ist der automatische
Weißabgleich (l 101) u. U. nicht präzise.
Wenn Sie den Camerarecorder länger als 6 Minuten im
Modus Aufnahmepause lassen, schaltet er sich
automatisch aus, um das Band zu schonen und
Akkustrom zu sparen. Um aus diesem Zustand erneut
aufzunehmen, den Schalter [OFF/ON/MODE] zuerst auf
[OFF] und dann wieder auf [ON] stellen.
Aufnahmeanzeigelampe
Die Aufnahmeanzeigelampe 4 leuchtet während der
Aufnahme, damit Ihre Akteure vor dem Camerarecorder
wissen, wann die Aufnahme läuft. Wenn Sie [REC LAMP] im
Untermenü [OTHER FUNCTIONS] auf [OFF] einstellen,
leuchtet die Aufnahmeanzeigelampe nicht mehr.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS35EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS35EG in the language / languages: English, German as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NVDS35EG

Panasonic NVDS35EG User Manual - Dutch - 120 pages

Panasonic NVDS35EG User Manual - French - 120 pages

Panasonic NVDS35EG User Manual - Italian - 120 pages

Panasonic NVDS35EG User Manual - Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info