627267
18
Zoom out
Zoom in
Previous page
1/52
Next page
18
SEARCH FADE STILL BLC
35
RECORD
REC
PAUSE
PAUSE
4
1
FOCUS
W
.
B
/
S
H
U
T
T
E
R
/
I
R
I
S
M
F
/
V
O
L
/
J
O
G
P
R
O
G
.
A
E
PUSH
MNL
M
AUTO
MENU
OFF ON
CAMERA
VCR
MODE
CARD
P.B
2
1
3
TAPE CARD
2
CAMERA Mode
Recording
When recording with the Mode Selector Switch
1
set to [AUTO], the Movie
Camera automatically adjust the focus and white balance. In some cases,
they cannot be adjusted automatically and need to be adjusted manually.
(l 24, 23)
1
Set the [OFF/ON] Switch to [ON].
The [CAMERA] Lamp lights up.
2
2
Slide the [TAPE/CARD] Selector towards [TAPE].
(NV-DS37/DS38 only)
3
Press the Recording Start/Stop Button.
Recording starts.
After the [RECORD] is displayed, it changes to [REC].
3
ªRecording Lamp
Tally Lamp) 4
The Recording Lamp lights up during recording and alerts those being
recorded that recording is in progress.
The Recording Lamp does not light up if the [REC LAMP] on the [OTHER
FUNCTIONS] Sub-Menu is set to [OFF].
ªTo Pause the Recording
Press the Recording Start/Stop Button again.
The [PAUSE] Indication is displayed.
5
If the Recording Pause Mode continues for more than 6 minutes, the power
is turned off automatically for tape protection and power conservation. To
resume recording from this condition, turn on the power again.
ªTo Check the Recording
By pressing the [S] Button
6
in the Recording Pause Mode, you can play
back the last few seconds of the recorded scene.
The [CHK] Indication is displayed. After checking, the Movie Camera
resumes the Recording Pause Mode.
ªTo View the Recorded Scene while the Recording Is
Paused
(Camera Search)
The recorded scene can be viewed by keep pressing the [jSEARCH] Button
6
or [SEARCHi] Button
7
in the Recording Pause Mode.
When the [jSEARCH] Button is pressed, images are played back in the
reverse direction.
When the [SEARCHi] Button is pressed, images are played back in the
forward direction.
ªSelf-Recording
By opening the LCD Monitor and rotating it frontward (to the lens side), you
can let the subject in front of the Movie Camera monitor the shot while
recording is in progress.
When the LCD Monitor is opened, the Viewfinder is disabled automatically.
However, when the LCD Monitor is rotated frontward, the image is also
shown in the Viewfinder.
If you prefer to have the image on the LCD Monitor to look like an image in a
mirror, set [SELFSHOOT] on the [OTHER FUNCTIONS] Sub-Menu to
[MIRROR].
Images are recorded normally and no left and right reversal occurs.
If [MIRROR] is used during self-recording, only the basic indications, such
as the Recording Indication [ ], Recording Pause Indication [
;] and
Remaining Battery Power Indication [x], are displayed.
8
If a general Warning/Alarm Indication [°] appears, return the LCD Monitor
to the original position in order to check the specific content of the Warning/
Alarm Indication.
ªTo Finish the Recording
Set the [OFF/ON] Switch to [OFF].
For other notes concerning this item, see page 39.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVDS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVDS28 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NVDS28

Panasonic NVDS28 User Manual - English - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info