53246
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
EXIT
OK
Power save: To reduce the VCRs power
consumption when the VCR is
switched off.
Set Power save mode as follows:
[ON]: The power consumption is greatly
reduced when the VCR is turned off.
[OFF]: The power consumption is not reduced
when the VCR is turned off.
Refer to the followings when [Power save] is set to
[ON].
[VCR display] is automatically set to [OFF].
To turn the VCR on, keep the [VCR-ON/OFF] button
pressed on the VCR main unit. It is not possible to
turn it on with the remote control.
The Power save function does not work in the timer
recording standby mode. After all programmed timer
recordings have been made, and after all
programmed data have been erased, the VCR
switches over to the Power save mode.
When the VCR is off, Pay TV programmes cannot be
watched on the TV because the signal from the
connected decoder is not looped through. To watch
them, turn on the VCR. (For NV-FJ620 Series,
NV-FJ621 Series and NV-FJ616 Series)
VCR display: For automatic change of the brightness
of the VCR display when the VCR is
switched off.
Set the brightness of the VCR display as follows:
[ON]: Indications are brightly lit.
[OFF]: Indications are not lit.
[DIMMED]: Indications are dimly lit.
OSD: For automatic display on the TV
screen of the TV station information,
type of sound system of the
programme being watched and the
sound playback mode. (See page 19.)
Set OSD mode as follows:
[4:3]: Indications can be displayed on the TV
screen.
[16:9]: Indications can be displayed on the TV
screen when using wide type of TV
screen and selecting the wide screen
mode on the TV setting.
Even if setting to [16:9], indications may be cut off
depending on the TV.
[OFF]: No indications appears.
AV2: To select the type of external source
equipment which is connected to the
VCRs AV2 21-pin socket.
(For NV-FJ620 Series, NV-FJ621
Series and NV-FJ616 Series)
Set the external source equipment as follows:
[DECODER]: When a decoder is connected.
[EXT LINK 1]: When a digital receiver which transmits
a special control signal recordings via
the 21-pin Scart cable, for example the
F.U.N. receiver (TU-DSF30/S3) is
connected for the linked timer
recordings. (See page 11.)
[EXT LINK 2]: When an external equipment with a
timer function is connected for the
linked timer recordings. (See page 11.)
[EXT]: When another VCR or a satellite
receiver is connected.
AV: To select the type of external source
equipment which is connected to the
VCRs AV1 21-pin socket.
(For NV-SJ220 Series)
Set the external source equipment as follows:
[TV/EXT]: When TV, another VCR or a satellite
receiver is connected.
[EXT LINK 1]: When a digital receiver which transmits
a special control signal recordings via
the 21-pin Scart cable, for example the
F.U.N. receiver (TU-DSF30/S3) is
connected for the linked timer
recordings. (See page 11.)
[EXT LINK 2]: When an external equipment with a
timer function is connected for the
linked timer recordings. (See page 11.)
TV system: To select the type of colour TV system
to be used during playback or during
recording from an external source.
Set the colour TV system as follows:
[PAL]: When PAL system is used.
[MESECAM]: When SECAM system is used.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-SJ220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-SJ220 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NV-SJ220

Panasonic NV-SJ220 User Manual - German - 25 pages

Panasonic NV-SJ220 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info