136314
19
Zoom out
Zoom in
Previous page
1/26
Next page
19
Decoder: To preset pay TV stations.
Press the [Cursor] (38) 34 to select [ON].
If [Decoder] is set to [OFF], normal TV stations are preset.
Video system: To change the type of video system.
Press the [Cursor] (38) 34 to select [PAL] or
[MESECAM].
AUTO: The VCR automatically distinguishes PAL,
SECAM/MESECAM system.
PAL: For receiving PAL signals.
MESECAM: For receiving SECAM signals.
Mono: To select the type of sound to be recorded.
(For NV-HS880EC and NV-HS830EC)
Press the [Cursor] (38) 34 to select [OFF].
Select [ON] if you want to record the normal (mono) sound
on the Hi-Fi audio tracks during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is distorted due to
inferior reception conditions.
9) Press the [OK] (24) to conclude the setting.
10)Press the [EXIT] (27) to exit the On Screen Display.
To Delete, Add or Move a Programme
Position
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
[OK] (24) to display the Tuning menu on the TV screen.
3) Press the [Cursor] (38) 34 to
select [Manual].
Press the [OK] (24) to display
the list of tuned TV stations.
4) Press the [Cursor] (38) 34 to
select the desired TV station.
5) Follow the operations below.
To delete a programme position [Delete]:
Press the [CH] (12) (J, red).
To insert a blank programme position [Add]:
Press the [DATE] (11) (r, green).
To move a TV station to another programme position
[Move]:
Press the [ON] (10) (r, yellow), and then use the
[Cursor] (38) 34 to select the new programme
position to which you want to assign the TV station.
6) Press the [OK] (24) to conclude the setting.
7) Press the [EXIT] (27) to exit the On Screen Display.
Note:
If downloading of the setup data has been performed, only the
instruction indication [Delete] appears.
Hint:
If you have performed Manual Tuning to enter TV stations, the
[ss] indication may appear under [Pos/Name] on the On Screen
Display when programming a S
HOW
V
IEW
timer recording.
To Restart the Auto Setup, Restart the
Download or Return the VCR to the
Shipping Condition
1) Press the [MENU] (7) to display the Main menu on the
TV screen.
2) Press the [Cursor] (38) 34 to select [Tuning]. Press the
[OK] (24) to display the Tuning menu on the TV screen.
3) Press the [Cursor] (38) 34 to
select [Auto-Setup Restart],
[Download] or [Shipping
condition].
4) Press the [OK] (24) to prepare
for Auto Setup start, Download
start or resetting the VCR to the
shipping condition.
5) Press the [OK] (24) again to actually start the Auto
Setup, start the Download or change the settings back to
the shipping condition.
After returning the VCR to the shipping condition,
disconnect and reconnect the AC Mains Cable to
re-tune the VCR.
Delete
Add
Move
Pos Name Ch
1 ARD 1
2 ZDF 2
3N3 19
4 HR3 26
5 BR3 18
6 RB3 3
7 SFB3 36
8 SW3 29
Tuning
Panasonic VCR
Manual
Auto-Setup Restart
Download
Shipping condition
Tuning
Panasonic VCR
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv hs880 eg s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv hs880 eg s in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info