136314
14
Zoom out
Zoom in
Previous page
1/26
Next page
14
Timer Recording
This VCR lets you programme up to 16 TV programmes
(including weekly and daily programmes) for unattended
recording up to one month in advance.
To Programme with the On Screen Display
(OSD)
This method offers easy step-by-step programming with the
remote control while you view the prompts on the TV screen.
Example:
Programming the timer recording of a TV programme
broadcast on programme position 2 (ZDF) from 20:00 to
21:30 on 27 October.
1) Press the [PROG./CHECK] (14)
to display the menu for
programming timer recordings on
the TV screen.
Alternatively, you can press the [MENU] (7) and then
select [Timer recording].
2) Press the [CH] (12) to select the programme position of
the desired TV station.
As an alternative method, after pressing the [CH] (12),
you can use the [Cursor] (38) 3421.
3) Press the [DATE] (11) to set the date on which the TV
programme will be broadcast.
4) Press the [ON] (10) to set the starting time.
When it is kept pressed, the indication changes in
30-minute intervals.
5) Press the [OFF] (22) to set the ending time.
6) Press the [SP/LP/EP] (21) to set the desired tape speed.
Regarding the [A] indication, refer to page 15.
7) Press the [Cursor] (38) 3421 to set [VPS/PDC] to
[ON] or [OFF] [jjj].
See page 15 for VPS/PDC recording.
8) Press the [OK] (24) to conclude
the setting.
9) Press the [TIMER] (20) to switch
the VCR over to the timer
recording standby mode.
Check that [Á] is lit on the VCR display.
If it is flashing, check the timer recording details again.
(See page 15.)
To Programme with the SHOWVIEW
Function
The SHOWVIEW numbers make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with
S
HOWVIEW number may be slightly longer than the actual
duration of the TV programme.
S
HOW
V
IEW
is a trademark of Gemstar Development
Corporation. The S
HOW
V
IEW
system is manufactured
under licence from Gemstar Development Corporation.
Example:
Programming a timer recording of a TV programme with the
S
HOWVIEW number 721114
1) Press the [SV/V+] ([ShowView])
(30) to display the menu for
entering the S
HOW
V
IEW
number
on the TV.
2) Press the [Numeric] (2) to enter the S
HOW
V
IEW
number.
If you have entered a wrong digit, press the [Cursor]
(38) 2 and then enter the correct digit.
3) Press the [OK] (24) to display the programmed content.
4) Press the [SP/LP/EP] (21) to set the desired tape speed.
Regarding the [A] indication, refer to page 15.
To change timer recording programmings, use the
[Cursor] (38) 3421, the [CH] (12), [DATE] (11),
[ON] (10) or [OFF] (22).
See page 15 for VPS/PDC recording.
5) Press the [OK] (24) again to conclude the settings.
6) Press the [TIMER] (20) to switch the VCR over to the
timer recording standby mode.
Check that [Á] is lit on the VCR display.
If it is flashing, check the timer recording details again.
(See page 15.)
To Suspend the Timer Recording Standby
Mode
Press the [TIMER] (20) so that the [Á] indication on the
VCR display disappears.
After you have finished using the VCR, be sure to reactivate
the timer recording standby mode by pressing the [TIMER]
(20) again, otherwise the programmed timer recording will
not be performed.
Note:
If the VCR is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the [Á] flashes on the VCR display. In this case, press the
[TIMER] (20) to put the VCR in the timer recording standby mode.
1.
/
:
:
2.
/
:
:
3.
/
:
:
4.
/
:
:
Timer recording
Pos Start Stop VPS
Name DATE ON OFF PDC
Panasonic VCR
1/2
1. ZDF 27/10
20:00 21:30 SP ON
2.
jjjjj jj
/
jj jj
:
jj jj
:
jj jj jjj
3.
jjjjj jj
/
jj jj
:
jj jj
:
jj jj jjj
4.
jjjjj jj
/
jj jj
:
jj jj
:
jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
Timer recording
Pos Start Stop VPS
Name DATE ON OFF PDC
Panasonic VCR
1/2
ShowView
7 2 1 1 1 4
Panasonic VCR
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv hs880 eg s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv hs880 eg s in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info