53884
21
Zoom out
Zoom in
Previous page
1/26
Next page
21
Power save: To reduce the VCRs power
consumption when the VCR is
switched off.
Set Power save mode as follows:
[ON]: The power consumption is greatly
reduced when the VCR is turned off.
[OFF]: The power consumption is not
reduced when the VCR is turned off.
Refer to the followings when [Power save] is set to
[ON].
[VCR display] is automatically set to [OFF].
To turn the VCR on, keep the [VCR-ON/OFF] button
pressed on the VCR main unit. It is not possible to
turn it on with the remote control.
The Power save function does not work in the timer
recording standby mode. After all programmed timer
recordings have been made, and after all
programmed data have been erased, the VCR
switches over to the Power save mode.
When the VCR is off, Pay TV programmes cannot be
watched on the TV because the signal from the
connected decoder is not looped through. To watch
them, turn on the VCR.
VCR display: For automatic change of the
brightness of the VCR display when
the VCR is switched off.
Set the brightness of the VCR display as follows:
[ON]: Indications are brightly lit.
[OFF]: Indications are not lit.
[DIMMED]: Indications are dimly lit.
AV2: To select the type of external
source equipment which is
connected to the VCRs AV2 21-pin
socket.
Set the external source equipment as follows:
[DECODER]: When a decoder is connected.
[EXT LINK 1]: When a digital receiver which
transmits a special control signal
recordings via the 21-pin Scart
cable, for example the F.U.N.
receiver (TU-DSF30/S3) is
connected for the linked timer
recordings. (See page 13.)
[EXT LINK 2]: When an external equipment with a
timer function is connected for the
linked timer recordings.
(See page 13.)
[EXT]: When another VCR or a satellite
receiver is connected.
TV system: To select the type of colour TV
system to be used during playback
or during recording from an external
source.
Set the colour TV system as follows:
[AUTO]: The VCR automatically
distinguishes PAL, SECAM/
MESECAM system. If the picture
lacks colour, set to [PAL] or
[MESECAM].
[PAL]: When PAL system is used.
[MESECAM]: When SECAM system is used.
RFC system: To set RFC system the same as the
TV system of the connected TV.
Set the type of RFC system as follows:
[BG]: PAL B.G.H/SECAM B.G
[DK]: PAL D/SECAM D.K.K1.
[I]: PAL I
NTSC playback: To play back a video cassette
recorded in the NTSC signal.
Set the type of colour TV system as follows:
[PAL TV]: For TVs that can receive PAL
signal.
[4.43]: For TVs that can receive NTSC 4.43
signal.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Language or Country Setting
Press the [MENU] button to display the Main menu
on the TV screen.
Press the [Cursor] buttons 34
to select [Other settings].
Press the [OK] button to display
Other settings menu.
Press the [Cursor] buttons 3421 to select
[Language] or [Country] and the entry field for
[Language] or [Country] in this order.
Press the [Cursor] buttons 34 to select the desired
language or country.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Tape length
OSD
Power save
VCR display
AV2
TV system
RFC system
NTSC playback
Language
Country
: AUTO (2 E-240)
: 4:3
: OFF
: DIMMED
: DECODER
: AUTO
: DK
: PAL TV
: English
: others
Other settings
Panasonic VCR
MENU
OK
OK
EXIT
EXIT
OK
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-HS820EE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-HS820EE in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info