53880
11
Zoom out
Zoom in
Previous page
1/26
Next page
11
REC
DIRECT TV REC
Recording from an external source
Recording from an external source, for example from a video
movie camera, can be performed.
Video movie camera Other VCR
Connect a video movie camera or a VCR to this VCR, as
shown in the illustration.
Press the [INPUT SELECT] button to select the AV Input
according to the socket on the VCR to which the source
unit has been connected.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
Make sure that [AV2] is set to [EXT].
(See page 21.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of the this VCR
Use the L connector for operations in the normal
(monaural) mode.
Press the [Play] button to start playback.
At the point where you want to join a new scene, press
the [Pause/Slow] button to put it in the still playback
mode.
Press the [REC] button to put it in the recording pause
mode.
If you leave the VCR in the recording pause mode for
more than 5 minutes, the VCR automatically switches
over to the stop mode to protect the video heads.
Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
When that point is reached, press the [Pause/Slow]
button again to start recording the new picture and
sound from the playback unit.
To record (copy) additional scenes, press the [Pause/
Slow] button to put this VCR in the recording pause
mode and then perform above step again.
At the point where you want to stop recording, press the
[Stop] button to finish recording.
Hint:
The new sound is recorded on both the Hi-Fi audio tracks
and the normal audio track. The sound recorded on the
normal audio track is always in mono.
To Immediately Record the Same TV
Programme That You Are Viewing on the
TV
(Direct TV Recording)
This function allows you to immediately start recording the
same programme that you are viewing on the TV.
The programme position selected on the VCR automatically
changes to that of the TV programme that you are viewing on
the TV.
Your TV must be equipped with the [Q Link] function.
The VCR must be connected to the TV via a fully-wired
21-pin Scart cable.
Press the [DIRECT TV REC] button.
Recording of the TV programme that you are viewing
on the TV starts.
In some cases, it may not be possible to change the
programme position on the TV during Direct TV
Recording.
Do not press the [AV LINK] button during Direct TV
REC, otherwise the recording may not be performed
correctly.
Press the [Stop] button to stop recording.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-HS820B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-HS820B in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info