62021
62
Zoom out
Zoom in
Previous page
1/80
Next page
Menu
62
VQT1A47
Menus related to taking pictures
ª [DATE/TIME]
This switches between date and time indications.
The movie camera automatically records the
date and time of picture taking on the tape/card.
You can also show or change the date/time
indication by repeatedly pressing the
[DATE/TIME] button on the remote control.
ª
[AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.
(The original audio signals can be kept
after the other audio signals are dubbed.)
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.
Audio can be recorded in higher quality.
(If audio signals are dubbed, then the
original audio signals will be erased.)
ª
[DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
ª
[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
When you start recording
When you turn on the power
When the unit goes from quick start standby
mode to recording pause
2 Beeps
When you pause recording
When you turn off the power
When the unit goes into quick start standby mode
2 Beeps for 4 times
When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs
(
-69-), and at other times. Check the sentence
displayed on the screen. (
-64-)
ª
[POWER SAVE]
[OFF]: When about 5 minutes passed
without any operation, the standby
mode automatically will be set. In
the standby mode, [;] blinks and it
takes time more than usual to start
recording after you press the
recording start/stop button.
[5 MINUTES]:When about 5 minutes passed
without any operation, the movie
camera automatically turns off to
protect the tape or to prevent the
battery from running down. When
you use the movie camera, turn it
on again.
In the following cases, the power may not turn
off even when set [POWER SAVE] >>
[5 MINUTES].
When connecting to the AC outlet
(When using the AC adaptor)
When connecting the USB cable or the DV
cable to a personal computer or other
equipment
When in PC Connection Mode
Menus related to playback
ª [REC DATA]
Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (
-36-),
etc.) used during the recordings are displayed
during playback.
If the [AUTO/MANUAL/FOCUS] switch was set
to [AUTO] when recording, [AUTO] appears on
the display.
When there is no data, [---] appears on the display.
If data recorded on this unit is played back on
other equipment (or a tape recorded on other
equipment is played back on this unit), the
settings information is sometimes not displayed
normally.
ª
[AUDIO OUT]
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
sound)
[L]: Left channel sound (main sound)
[R]: Right channel sound (sub sound)
Other menus
ª [INITIAL SET]
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to the
initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
ª
[DEMO MODE]
If you set to [DEMO MODE] >> [ON] without
inserting a cassette and a card, the movie camera
is automatically set to the demonstration mode for
introducing its functions. If any button is pressed
or operated, the demonstration mode is
cancelled. If no operations take place for approx.
10 minutes, the demonstration mode
automatically starts. To terminate the
demonstration mode, insert a cassette or a card,
or set to [DEMO MODE] >> [OFF]. For normal
use, set this function to [OFF].
VQT1A47.book 62 ページ 2006年12月27日 水曜日 午後4時7分
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-GS320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-GS320 in the language / languages: English as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NV-GS320

Panasonic NV-GS320 User Manual - English - 160 pages

Panasonic NV-GS320 User Manual - German - 156 pages

Panasonic NV-GS320 User Manual - Dutch - 28 pages

Panasonic NV-GS320 User Manual - Dutch - 80 pages

Panasonic NV-GS320 User Manual - French - 80 pages

Panasonic NV-GS320 User Manual - Italian - 156 pages

Panasonic NV-GS320 User Manual - Polish - 160 pages

Panasonic NV-GS320 User Manual - Portuguese, Spanish - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info