291281
59
Zoom out
Zoom in
Previous page
1/68
Next page
Others
59
VQT0T19
Playback (Sound)
1: Sound is not played back from the built-in
speaker of the movie camera.
0 Is the volume too low? During playback, push
the [s /VOLr] lever to display the volume
indication and adjust it. (
-40-)
2: Different sounds are reproduced at the
same time.
Have you set [SETUP] >> [12bit AUDIO] >>
[MIX]? If you set [AUDIO REC] >> [12bit] and
dub audio to a recorded tape, you can hear the
sound on recording and the sound dubbed at a
later time. To hear the sounds separately, set
to [ST1] or [ST2]. (
-48-)
Have you set [SETUP] >> [AUDIO OUT] >>
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to
hear main sound, and set to [R] to hear the sub
sound. (
-52-)
3: Audio dubbing cannot be performed.
Is the accidental erasure prevention slider on
the cassette open? If it is open (set to [SAVE]),
audio dubbing cannot be performed. (
-15-)
Are you attempting to edit a tape portion that
was recorded in LP mode? LP mode does not
allow audio dubbing. (
-24-)
4: The original sound was erased when audio
dubbing was performed.
If you perform audio dubbing on a recording
made in [16bit] mode, the original sound will be
erased. If you wish to preserve the original
sound, be sure to select [12bit] mode when
recording.
5: Sounds cannot be played back.
Although a cassette with no audio dubbing is
being played, have you set [SETUP] >>
[12bit AUDIO] >> [ST2]? To play back a
cassette with no audio dubbing, set
[12bit AUDIO] >> [ST1]. (
-48-)
Is the variable speed search function working?
Press the [VAR SEARCH] button on the
remote control to cancel the variable speed
search function. (
-41-)
Playback (Pictures)
1: Although the movie camera is correctly
connected to a TV, playback images cannot
be seen.
The images are vertical.
Have you selected video input on the TV?
Please read the operating instructions of your
TV and select the channel that matches the
input terminals used for the connection.
Is the [TV ASPECT] setting correct? Change
the setting to match the aspect ratio of the TV.
[SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
2: Mosaic-pattern noise appears on images
during cue or review playback.
This phenomenon is characteristic of digital
video systems. It is not a malfunction.
3: Horizontal stripes appear on images during
cue and review playback.
Horizontal stripes may appear depending on
the scene, but this is not a malfunction.
4: Playback picture is not clear.
Are the heads of the movie camera dirty? If the
heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video (optional). (
-61-)
If the terminal for the Multi cable is soiled,
noises may appear on the screen. Wipe the soil
off the terminal with a soft cloth, and then
connect the cable to the A/V terminal.
Is a picture containing a copyright protection
signal (copy guard) being recorded? When a
protected picture is played back by the movie
camera, mosaic-like patterns appear on the
picture.
Card
1: Recorded pictures are not clear.
Have you set [BASIC] >> [PICT. QUALITY] >>
[ ]? If recording is done with it set to [ ],
pictures with fine details may include a mosaic-
like pattern. Set [PICT. QUALITY] >> [ ]. (
-28-
)
2: A file recorded on a card cannot be deleted.
Is the file locked? Locked files cannot be
deleted. (
-44-)
For the SD Memory Card, if its write protect
switch is set to [LOCK], then deletion is
disabled. (
-16-)
3: Photoshot playback images do not look
normal.
The picture may be damaged. In order to
prevent the loss of image data, backing up on a
cassette or a personal computer is
recommended.
4: Even if a card is formatted, it cannot be
used.
Either the movie camera or the card may be
damaged. Please consult a dealer. Use an SD
Memory Card from 8 MB to 2 GB with this unit.
5: During playback, [UNPLAYABLE CARD] is
displayed.
The image was either recorded in a different
format, or data is damaged.
body.fm 59 ページ 2005年11月16日 水曜日 午後8時29分
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv-gs300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv-gs300 in the language / languages: English as an attachment in your email.

The manual is 14,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic nv-gs300

Panasonic nv-gs300 User Manual - English - 76 pages

Panasonic nv-gs300 User Manual - English - 20 pages

Panasonic nv-gs300 User Manual - English - 68 pages

Panasonic nv-gs300 User Manual - German - 144 pages

Panasonic nv-gs300 User Manual - German - 76 pages

Panasonic nv-gs300 User Manual - Dutch - 144 pages

Panasonic nv-gs300 User Manual - Dutch - 76 pages

Panasonic nv-gs300 User Manual - French - 144 pages

Panasonic nv-gs300 User Manual - French - 76 pages

Panasonic nv-gs300 User Manual - Italian - 144 pages

Panasonic nv-gs300 User Manual - Italian - 76 pages

Panasonic nv-gs300 User Manual - Polish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info