291281
13
Zoom out
Zoom in
Previous page
1/68
Next page
Before using
13
VQT0W28
Quick Start
When quick start is ON the battery power is still
being consumed, even when the LCD monitor
and the viewfinder are closed.
The movie camera will resume recording/pause
mode about 1.7 seconds after the LCD monitor or
the viewfinder is reopended.
Please note in quick start mode approximately
half the pause recording power is being
consumed. Using quick start mode will reduce
the battery recording/playback time.
This is only activated in the following cases.
A tape or a card is inserted, while the Tape
Recording Mode is set.
A card is inserted, while the Card Recording
Mode is set.
Set to Tape/Card Recording Mode.
1 Set [SETUP] >> [QUICK START] >> [ON].
(
-18-)
2 While the [OFF/ON] switch is still set to
[ON], close the LCD monitor and retract the
viewfinder.
The Status indicator lights green and the unit
goes into quick start standby mode.
The lens cover does not close.
The movie camera will not go into quick start
standby mode unless the LCD monitor is
closed and the viewfinder is retracted.
3 Open the LCD monitor or extend the
Viewfinder.
The Status indicator lights red and the
camera is put into recording pause approx.
1.7 seconds after it is turned on.
ª
To cancel Quick Start
1 Set [SETUP] >> [QUICK START] >> [OFF].
(
-18-)
If the [OFF/ON] switch is set to [OFF] while the
unit is in quick start standby mode, the lens
cover closes and the power turns off.
If the standby continues for approx. 30 minutes,
then the Status indicator will go off and the
camera will be completely turned off.
If the Mode dial is moved or the battery is
removed in quick start standby mode, quick
start is cancelled and the power turns off.
When the movie camera is quick-started with
the white balance on automatic, it may take
some time until the white balance is adjusted if
the scene being recorded has a light source
different from the scene last recorded. (When
the colour night view function is used, however,
the white balance of the scene last recorded is
retained.)
If the power is turned on in quick start standby
mode, the zoom magnification becomes 1k and
the picture size may differ from what it was
before quick start standby mode.
If [POWER SAVE] (
-52-) is set to [5 MINUTES]
and the unit automatically goes into quick start
standby mode, set the [OFF/ON] switch to
[OFF], then to [ON] again. Also, close the LCD
monitor and retract the viewfinder and then
open the LCD monitor or extend the viewfinder
again.
When using the AC adaptor, Quick Start can be
used even if a tape/card is not inserted.
OFF
ON
OFF
ON
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv-gs300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv-gs300 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic nv-gs300

Panasonic nv-gs300 User Manual - English - 68 pages

Panasonic nv-gs300 User Manual - English - 76 pages

Panasonic nv-gs300 User Manual - English - 20 pages

Panasonic nv-gs300 User Manual - German - 144 pages

Panasonic nv-gs300 User Manual - German - 76 pages

Panasonic nv-gs300 User Manual - Dutch - 144 pages

Panasonic nv-gs300 User Manual - Dutch - 76 pages

Panasonic nv-gs300 User Manual - French - 144 pages

Panasonic nv-gs300 User Manual - French - 76 pages

Panasonic nv-gs300 User Manual - Italian - 144 pages

Panasonic nv-gs300 User Manual - Italian - 76 pages

Panasonic nv-gs300 User Manual - Polish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info