Manual Panasonic NV-GS30 EG (page 17 of 22) (English)

614028

Zoom out

Zoom in

1/22

Others

-47-

Compatibility with S-VHS or VHS Cassettes

Because this Movie Camera employs a digital

system for recording image and sound data, it is

not compatible with conventional S-VHS or VHS

video equipment that employs an analog

recording system.

The size and shape of the Cassette are also

different.

Compatibility with Output Signals

Because AV signal output from the AV signal

output socket is analog (the same as

conventional video systems), this Movie Camera

can be connected with S-VHS or VHS video or a

TV for playback.

ª Focus

Auto Focus Adjustment

The Auto Focus System automatically moves

forward and backward the focusing lens inside

the Movie Camera to bring the subject into focus

so that the subject can be seen clearly.

However, the Auto Focus System does not

function properly for the following subjects or

under the following recording conditions.

Please use the Manual Focus Mode instead.

1) Recording a subject whose one end is

located closer to the Movie Camera and

the other end farther away from it

≥Because Auto Focus makes adjustments at

the centre of an image, it may be impossible

to focus on a subject that is located in both

foreground and background.

2) Recording a subject behind dirty or dusty

glass

≥Because the focus is on the dirty glass, the

subject behind the glass will not be focused.

3) Recording a subject in dark surroundings

≥Because the light information that comes

through the lens decreases considerably,

the Movie Camera cannot focus correctly.

4) Recording a subject that is surrounded by

objects with glossy surfaces or by highly

reflective objects

≥Because the Movie Camera focuses on the

objects with glossy surfaces or on highly

reflective objects, the recording subject may

become blurry.

5) Recording a fast-moving subject

≥Because the focus lens-inside moves

mechanically, it cannot keep up with the

fast-moving subject.

6) Recording a subject with little contrast

≥Because the Movie Camera achieves focus

based upon the vertical lines of an image, a

subject with little contrast, such as a white

wall, may become blurry.

ª Time Code

Time Code signals are data that indicate time

measured in hours, minutes, seconds, and

frames (25 frames per second). If this data is

included in a recording, an address is assigned to

each image on the tape.

≥The Time Code is automatically recorded as a

part of the sub-code at each recording.

≥When a new (previously unrecorded) Cassette

is inserted, the Time Code automatically starts

from zero. If a recorded Cassette is inserted,

the Time Code picks up from the point where

the last scene was recorded. (In this case, when

the Cassette is inserted, the zero display

[0h00m00s00f] may appear, but the Time Code

starts from the previous value.)

≥The Time Code cannot be reset to zero.

≥Unless the Time Code is continuously recorded

from the beginning of a tape, accurate editing

may not be possible. To ensure that the Time

Code will be recorded with no breaks, we

recommend the use of the Camera Search

Function (

-17-) or the Blank Search Function

(

-30-) before recording a new scene.

ª Memory Stop Function

The Memory Stop Function is useful for the

following operations.

Rewinding or fast-forwarding a tape to a

desired position

1 Set [DISPLAY SETUP] >> [C.DISPLAY] >>

[MEMORY].

2 Reset the Tape Counter to zero at the tape

position from which you want to play it

back later. (

-7-, -14-)

3 Start playback or recording.

4 After playback or recording has finished:

Rotate the [OFF/ON/MODE] Switch and set

the Movie Camera to VCR Mode.

≥The [VCR] Lamp lights up.

5 Rewind the tape.

≥The tape automatically stops approximately

at the position where the counter was set to

zero.

Stopping editing automatically during audio

dubbing

1 Set [DISPLAY SETUP] >> [C.DISPLAY] >>

[MEMORY].

2 Reset the Tape Counter to zero at the

position where you want to stop editing.

3 Play back the still picture where you want to

start audio dubbing.

4 Start audio dubbing. (-33-)

≥Audio dubbing automatically stops at the

position where the counter was set to zero.

30B-ENG.book 47 ページ２００３年１月２３日　木曜日　午後８時４６分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-GS30 EG in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NV-GS30 EG

Panasonic NV-GS30 EG User Manual - English - 15 pages

Panasonic NV-GS30 EG User Manual - German - 52 pages

Panasonic NV-GS30 EG User Manual - Dutch - 51 pages

Panasonic NV-GS30 EG User Manual - French - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic NV-GS30 EG Manual

Product: