614029
13
Zoom out
Zoom in
Previous page
1/52
Next page
Before Use
-13-
ª Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1 Put a finger on the [OPEN4] Knob (1) and
pull the LCD Monitor
(2) out about 90o in the
direction of the arrow.
The Viewfinder goes off.
2 Adjust the LCD Monitor angle according to
the desired recording angle.
The LCD Monitor can rotate a maximum of
180o 1 from the vertical position to the
upward direction and a maximum of 90o 2 to
the downward direction. Forcefully rotating
the LCD Monitor beyond these ranges will
damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ª Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the [DISPLAY SETUP]
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
It adjusts the colour saturation of the image on
the LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
It adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be
adjusted, and then turn the [PUSH] Dial to raise
(2)
(1)
290o1180o
LCD/EVF SET
PRESS MENU TO RETURN
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
or lower the number of vertical bars in the Bar
Indication.
A larger number of vertical bars indicates
stronger brightness or colour saturation.
To Increase the Brightness of the Entire LCD
Monitor
Set the [LCD MODE] on the [DISPLAY SETUP]
Sub-Menu to [BRIGHT].
These adjustments do not affect the recorded
images.
For other notes concerning this item, see
-45-.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Movie Camera displays various
function setups on Menus.
1 Press the [MENU] Button (40).
The Menu corresponding to the Mode
selected by using the [OFF/ON/MODE]
Switch
(37) is displayed.
2 Turn the [PUSH] Dial (32) to select a desired
Sub-Menu.
Turn the [PUSH] Dial
(32) to display the
highlightened item.
3 Press the [PUSH] Dial (32) to display the
selected Sub-Menu.
4 Turn the [PUSH] Dial (32) to select the item
to be set.
5 Press the [PUSH] Dial (32) to set the
selected item to a desired mode.
With each press of the [PUSH]
Dial, the
cursor [1] moves to the next mode. Menu
items that cannot be used in combination with
the selected item are displayed in dark blue.
While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [SET] Button and [ITEM] Button on the
Remote Controller. (
-8-)
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(40) (32)
(37)
O
F
F
O
N
M
O
D
E
30B-ENG.book 13 ページ 2003年1月23日 木曜日 午後8時46分
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NV-GS10 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NV-GS10 B in the language / languages: English as an attachment in your email.

The manual is 4,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info