Manual Panasonic nv fj 628 (page 19 of 24) (English)

135564

Zoom out

Zoom in

1/24

Setting the VCR’s Clock

When [Poccия] (Russia) is selected in the Country setting

menu, the [AUTO] field does not appear on Clock setting

menu.

To Manually Adjust the Clock

1) Press the [MENU] (7) to display the Main menu on the

TV screen.

2) Press the [Cursor] (38) 34 to

select [Clock setting]. Press the

[OK] (24) to display the Clock

setting menu on the TV screen.

3) Confirm that [Clock setting] is set

to [MAN.], and then press the

[OK] (24).

4) Use the [Cursor] (38) 3421 to set the date and time.

• Instead of the [Cursor] (38) 3421, you can also use

the [Numeric] (2) to set the date and time.

5) Press the [OK] (24) to conclude the setting.

6) Press the [EXIT] (27) to exit the On Screen Display.

To Activate the Automatic Time

Correction Function

(For NV-FJ732EE and NV-FJ632EE)

If a TV station transmits a signal for time setting, performing

the operation steps below activates the Automatic time

correction function and the time is corrected automatically.

1) Press the [MENU] (7) to display the Main menu on the

TV screen.

2) Press the [Cursor] (38) 34 to

select [Clock setting]. Press the

[OK] (24) to display the Clock

setting menu on the TV screen.

3) Press the [Cursor] (38) 34 to

set [Clock setting] to [AUTO].

4) Press the [OK] (24) to conclude the setting.

• Under adverse reception conditions, etc., the Automatic

time correction function may not work. In this case, the

indication for [Clock setting] is automatically reset to

[MAN.].

If the reception conditions improve later on, it may be

possible to activate this function.

5) Press the [EXIT] (27) to exit the On Screen Display.

Hints:

• If [Clock setting] is set to [AUTO] when you open the Clock screen,

do not set it to [MAN.], otherwise, the automatic time correcting

function is deactivated.

• The built-in clock employs the 24-hour system.

• In case of a power failure, an automatic back-up system

automatically maintains the operation of the clock for approximate

60 minutes.

• When [Clock setting] is set to [AUTO], the automatic time

correction function checks and if necessary adjusts the time

several times every day.

The automatic time correction function only works when the VCR is

switched off; it does not work in the timer recording standby mode.

• If [Clock setting] is set to [MAN.] and [Power save] to [ON]

(see page 20), the time may not be maintained correctly.

In this case, manually adjust the clock.

• If [Clock setting] is set to [AUTO] and [Power save] to [ON], the

Automatic time correction function does not work while the VCR is

turned off. However, as soon as it is turned on, the Automatic time

correction function is activated and the clock is set correctly.

Various Settings

1) Press the [MENU] (7) to display

the Main menu on the TV

screen.

2) Press the [Cursor] (38) 34 to

select [Other settings]. Press the

[OK] (24) to display Other

settings menu.

3) Press the [Cursor] (38) 3421

to select the desired field then

desired position.

Tape length: To set the Tape length of the cassette being

used to ensure correct indication of the

remaining tape time.

• Set Tape length as follows:

[AUTO (2 E-240)]:

The VCR automatically distinguishes E30, -60, -

90, -120, -180 and -240 tapes.

[E-195]: For E195 tape

[E-260]: For E260 tape

[E-300]: For E300 tape

• Even if you have selected the correct tape length, the remaining

tape time may not be indicated correctly with certain kinds of

cassettes.

Audio playback: To set the Audio mode to be used during

playback. (For NV-FJ732EE)

• Set Audio mode as follows:

[NORMAL]: Normally set to this position.

[MIX]: Use this setting when playing back a cassette

tape on which audio dubbing has been

performed. The Hi-Fi sound track with the original

sound and the normal sound track (mono) with

the audio-dubbed sound are played back

together.

SQPB: To play back tapes recorded in the S-VHS

format (SQPB=S-VHS Quasi Playback).

• Set SQPB mode as follows:

[AUTO]: VCR automatically detects the format in which the

recording was made and selects the same format

for playback. However, picture distortion may

appear.

Therefore, set to [ON] or [OFF].

[ON]: Use this setting when playing back a cassette

tape recorded in the S-VHS format.

[OFF]: Use this setting when playing back a cassette

tape recorded in the VHS format only.

NTSC playback:To play back a video cassette recorded in

the NTSC signal.

• Set type of colour TV system as follows:

[PAL TV]: For TVs that can receive PAL signal.

[4.43]: For TVs that can receive NTSC 4.43 signal.

: MAN.

: 20:30:24

: 16.10.05

Clock setting

Time

Date

Panasonic VCR

Clock setting

: AUTO

: 20:30:24

: 16.10.05

Clock setting

Time

Date

Panasonic VCR

Clock setting

Tape length

Audio playback

SQPB

NTSC playback

Power save

VCR display

OSD

AV2

: AUTO (2 E-240)

: NORMAL

:AUTO

:PAL TV

:OFF

: DIMMED

: 4:3

: DECODER

Other settings

Panasonic VCR

1/2

TV system

RFC system

Remote

Language

Country

:AUTO

:DK

: VCR 1

: English

: others

Other settings

Panasonic VCR

2/2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 628 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic nv fj 628 Manual

Product: