135564
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Preset Download
(To Set Up this VCR with a TV Already in
Use)
(For NV-FJ732EE and NV-FJ632EE)
1) Switch the TV on.
2) Select the AV input on your TV.
3) Set the [VCR/TV] (23) to [VCR].
4) Press the [VCR-ON/OFF] (1) to
switch the VCR on. Downloading
of the setup data starts
automatically. (Applicable to TVs
with [Q Link] or [DATA LOGIC]
function)
If your TV is equipped with the
[Easy Link], [Megalogic] or
[SMARTLINK] function, the
Country setting menu appears on
the TV screen. Press the [Cursor]
(38) 3421 to select the
desired country and the [OK]
(24). The downloading
automatically starts.
When the indication appears on
the VCR display, the
downloading is complete.
If you are connecting your VCR to a TV using RF coaxial
cable and 21-pin Scart cable, then follow the steps.
(AV Connection)
RF Coaxial cable must be connected to watch TV channels
even if 21-pin Scart cable is used to connect VCR to TV.
Auto Setup Function
The Auto Setup function automatically tunes all available TV
stations.
When [Poccия] (Russia) is selected in the Country setting
menu, the names of TV stations may not be correctly
displayed and the Auto Clock Setting does not work.
1) Press the [VCR-ON/OFF] (1) to
turn on the VCR.
The Country setting menu
appears on the TV screen.
2) Press the [Cursor] (38) 3421.
Select the country where you are
using the VCR.
3) Press the [OK] (24).
The VCRs Auto Setup
automatically starts and tunes all
available TV stations and also
sets the clock. This takes about
5minutes.
(For NV-FJ732EE and
NV-FJ632EE)
When the indication appears on
the VCR display, the Auto Setup
is complete.
(For NV-FJ628EE)
When the clock setting menu appears after Auto Setup
has finished
Press the [Cursor] (38) 3421 to set the correct time
and date.
Press the [OK] (24) to conclude the setting.
4) Press the [MENU] (7) for more than 5 seconds. The RF
output channel number appears on the VCR display.
The initial setting is channel 38.
5) Press the [Numeric] (2) [0] or [Channel] (33) to
displayed RF output channel number changes to [ss].
6) Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] (27).
When the clock setting menu appears after Auto Setup
has finished
1) Press the [Cursor] (38) 3421 to set the correct time
and date.
2) Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned
correctly by the Auto Setup function
See page 17.
When no station has been set, confirm all connections
of the VCR again and restart the Auto Setup
See page 18.
When the station names and/or channel numbers have
not been set correctly
See page 17.
Download in
progress,
please wait.
Position 67
Download
Panasonic VCR
Country
Deutschland
Česká Rep.
Magyarország
Polska
Россия
others
Panasonic VCR
1 AV1 21-pin Scart socket
2 Aerial Input socket
3 Aerial Output socket
4 Aerial (not supplied)
5 Aerial lead (not supplied)
6 TV (not supplied)
7 Aerial Input socket
8 21-pin Scart socket
9 RF Coaxial cable (supplied)
10 Fully-wired 21-pin Scart cable
(not supplied)
Country
Deutschland
Česká Rep.
Magyarország
Polska
Россия
others
Panasonic VCR
Country
Tuning
: others
: Ch 21
Auto-Setup
Panasonic VCR
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv fj 628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv fj 628 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info