136019
56
Zoom out
Zoom in
Previous page
1/68
Next page
56
Tape Trade Editing
When performing a Programme Editing after this VCR and Panasonic Digital Video Camera have been connected
using an Edit cable and a DV cable (cable for sending video and audio signals), this function enables the Editing
controller of this VCR to set the edit points for the playback unit.
It makes it easy to accomplish those operations using the Jog/Shuttle functions, which are so crucial for setting the
edit points, with the same operational feel of the operating the playback unit without depending on the playback unit
operations.
Settings for the tape in the playback unit
1 Insert the tape to be used for the playback unit in this
VCR, and set the switches as shown below.
2 Register the playback units editing programmes.
(Refer to the procedure for Programme Editing on
pages 46 to 51.)
3 Remove the tape to be used for the playback unit from
this VCR, and insert it in the playback unit.
(Leave the playback unit in the playback mode.)
Settings for the tape in the recording unit
4 Insert the tape to be used for the recording VCR, and
set the switches as shown below.
5 Register the recording VCRs editing programmes.
(Refer to the procedure for Programme Editing on
pages 46 to 51.)
6 Editing the registered programmes. (Refer to the
procedure for Programme Editing on pages 46 to
51.)
Note:
This function cannot be used for editing operations
involving AV Insert, Audio Dubbing or Audio
Mixing.
S-VIDEO
VIDEO
L AUDIO R
S-VIDEO
VIDEO
L/MONO AUDIO R
Í / I <
EJECT
AUDIO
OUT
REW STOP
PLAY
FF PAUSE
STEREO
SERECT
DV2
DV SELECT
1
2
EDIT 8mm
¥
AV4
OUT
AV4
IN
EDIT CONTROL
RECORDER
PRINTER/
D.STILL PICTURE
PLAYER
PASSIVE
EDIT
DV
8mm
SP/LP TBC 3D DNR PRINT
AUDIO REC LEVEL
AUDIO MIX
STILL
ALBUM
INPUT SELECT
010
STEREO1
STEREO1 STEREO2
100
¥
REC
/
OTR
MIXING EDIT
EDIT CONTROL
RECORDER
PRINTER/
D.STILL PICTURE
PLAYER
PASSIVE
EDIT
DV
8mm
EDIT CONTROL
RECORDER
PRINTER/
D.STILL PICTURE
PLAYER
PASSIVE
EDIT
DV
8mm
Preparation
Complete necessary connections and settings.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv dv 2000 ec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv dv 2000 ec in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info