136019
42
Zoom out
Zoom in
Previous page
1/68
Next page
42
Preparations
Confirm that the TV is on and the VCR viewing
channel is selected.
Complete necessary connections and settings.
[R2835]
Set One-Touch-Edit to ON on Edit functions menu.
[R37]
Operations
1 Press JOG/SHUTTLE on the Editing controller, and
check that the button is lit.
2 Search for the edit start point on the
recording VCR.
3 Press AUDIO DUB on the Editing
controller.
The picture from the playback unit
appears on the screen.
4 Press MIXING EDIT.
5 Search for the edit start point on the playback unit.
6 Press JOG/SHUTTLE on the Editing controller.
Editing begins.
If you wish to adjust the volume of the original
audio (STEREO1) and external recording source
(A2, A3 or A4) during Audio Mixing,
AUDIO MIX: To adjust the volume of the
original audio (STEREO1).
AUDIO REC LEVEL: To adjust the volume of the
audio from external recording
source (A2, A3 or A4).
To continue editing, press JOG/SHUTTLE on the
Editing controller, and repeat steps 56.
7 Press
(STOP) on the Editing controller to stop
editing.
<
EJECT
AUDIO
OUT
REW STOP
PLAY
FF PAUSE
STEREO
SERECT
DV IN/OUT
DV SELECT
1
2
EDIT 8mm CONTROL
¥
AV4
OUT
AV4
EDIT CONTROL
RECORDER
PRINTER/
D.STILL PICTURE
PLAYER
PASSIVE
EDIT
DV
8mm
CONTROL
SP/LP TBC 3D DNR PRINT
AUDIO REC LEVEL
AUDIO MIX
STILL
ALBUM
INPUT SELECT
010
STEREO1
STEREO1 STEREO2
100
¥
REC
/
OTR
MIXING EDIT
MIXING EDIT
4
6
DIGITAL VCR
3
1,5
7
2,5
S-VIDEO
VIDEO
L AUDIO R
To Monitor the Mixed Audio after Audio Mixing
Press STEREO SELECT during playback and select
STEREO2.
Notes:
¡ Audio Mixing is not possible in the following
cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV1 or DV2.
¡ In order to ensure that the editing operation is
performed properly, the editing points should be set at
least 20 seconds after the beginning of the tape.
¡ When using the Editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 5), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
One-Touch Audio Mixing
This function is used to mix the audio on STEREO1, which has already been recorded, with audio from a external
recording source (A2, A3 or A4), and record the result on STEREO2.
This function is useful for adding new audio, such as music or a narration, to the original audio which has already
been recorded.
ST 2
ST12
A DUB
L
R
dB - 30 20 10 5 0 OVER
l l l l l l l l
l l l l l l l l l
ST 2
ST1 2
L
R
dB - 30 20 10 5 0 OVER
l l l l l l l l
l l l l l l l l l
ST1 2
ST1 2
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic nv dv 2000 ec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic nv dv 2000 ec in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info