502267

Panasonic NR-B32FW2 Manual

6
Zoom out
Zoom in
Previous page
1/180
Next page
66
Cleaning
After installation, wipe the appliance clean with warm water.
Connecting the mains plug to the household mains socket
You can connect the mains plug immediately after installation.
When the mains plug is connected to the household mains socket, the temperature display starts
ashing as shown in the gure on the right, and cooling starts inside the refrigerator.
The temperatures displayed at this time are not the actual temperatures.
When the temperature of the fridge reaches 8 °C, the freezer reaches -12 °C and the Vitamin-Safe
Zone reaches 8 °C, the temperature display stops ashing and lights, and it shows the actual
temperature.
It takes about half a day to reach the set temperatures (when the room temperature is around
32 °C, there is no food inside the refrigerator, and the doors are closed).
The actual temperatures may not be displayed for a while after the temperature display stops
ashing.
Place food inside the refrigerator only after conrming that the refrigerator compartment has been cooled.
Notes:
• Cooling may take longer in the summer months or at other times when the room temperature is higher.
• While the temperature display is ashing, the alarm sounds to warn that the temperature has risen. The alarm can be
turned off by pressing
.
• If you need to unplug the refrigerator, wait at least 10 minutes before you plug it back in again. If not, you might damage
the compressor.
Ambient room temperature
You’ll nd your refrigerator’s climate classication on the rating plate in the left side of the refrigerator compartment. It
shows the room temperature the appliance is designed to work in.
Climate classication Permitted ambient temperature
SN (Extended Temperate) +10°C to 32°C
N (Temperate) +16°C to 32°C
ST (Subtropical) +16°C to 38°C
T (Tropical) +16°C to 43°C
For saving energy
1. Install the refrigerator in a dry, cool and well-ventilated location. The colder the ambient temperature, the better the
efciency. (Please refer to Page 5 for dimensions and clearance)
2. The combination of drawers and shelves that result in the largest in volume and the most efcient use of energy for the
refrigerator.
• Remove all drawers in the freezer.
• Attach the drawers and shelves in the refrigerator to the positions illustrated on the section of “Parts” (P.7).
3. Do not over ll the refrigerator to allow the air to circulate.
4. Open the doors only when necessary and as briey as possible.
5. Occasionally clean the ventilation openings at the bottom of the refrigerator with a vacuum cleaner, etc.
(Take care not to damage the refrigerant pipe inside the cover)
6. When setting to “Super Freeze Mode”, power consumption will be increased.
Installation (continued)
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NR-B32FW2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NR-B32FW2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 68,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info