21
Control Panel
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(9)
(11)
(12)
(13)
(14)
Beep Sound:
A beep sounds when a pad is pressed.
If this beep does not sound, the setting
is incorrect. When the oven changes
from one function to another, two
beeps sound. After completion of
cooking, five beeps sound.
(1) Display Window
(2) Time Pads
(3) Turbo reheat
(4) Microwave Power Settings
(5) Delay/Stand Pad:
This can be used to delay a
cooking program for up to 9 hrs
and 59 mins., or used to time or
for standing (non-cooking) time.
(6) Clock Pad:
Press the clock pad. Using the
minute and second pads set the
clock (24 hr clock). Press clock
pad again to stop colons flashing.
(7) Stop/Cancel Pad:
Before Cooking:
one press clears your
instructions.
During Cooking:
one press temporarily stops the
cooking program. Another press
cancels your instructions and
the time of day will appear in
the display.
(8) Door Release Button
(9) Auto Weight Defrost
Programs
(10) Sensor Reheat Pad
(11) Sensor Cook Programs
(12) More/Less Pads
(13) lb/oz Conversion Pad
(14) Start Pad:
Press to start operating the
oven. If during cooking the door
is opened or Stop/Cancel Pad is
pressed once, Start Pad has to
be pressed again to continue
cooking.
(7)
(10)
The design of your control panel may vary from the
panel displayed (depending on model number), but the
words on the pads should be the same.
If an operation is set and Start Pad is not pressed, after
6 minutes, the oven will automatically cancel the
operation. This display will revert back to clock or colon
mode.
This oven is equipped with an energy saving function.
Please Note
1. When in stand-by mode the brightness of the
display will be reduced.
2. The oven will enter stand-by mode, when first
plugged in and immediately after the last operation
has completed.
