734696
4
Zoom out
Zoom in
Previous page
1/38
Next page
2
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that
the replacement fuse has a rating of 13 amps
and that it is approved by ASTA or BSI to
BS1362. Check for the ASTA mark or the
BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET OUTLET IN
YOUR HOME THEN THE FUSE SHOULD BE
REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY AND AN
APPROPRIATE ONE FITTED. THERE IS A
DANGER OF SEVERE ELECTRICAL SHOCK
IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted, please observe the
wiring code as shown opposite. If in any doubt,
please consult a qualified electrician (For U.K.
Models only).
WARNING: THIS APPLIANCE MUST BE
EARTHED.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following code:
Green-and-yellow: Earth. Blue: Neutral. Brown:
Live.
As the colours of the wire in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured GREEN-AND-
YELLOW must be connected to the terminal in
the plug which is marked with the letter E or by
the Earth symbol or coloured GREEN or
GREEN-AND-YELLOW.
The wire which is coloured BLUE must be
connected to the terminal in the plug which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is
marked with the letter L or coloured RED.
When this oven is installed it should be easy to
isolate the appliance from the electricity supply
by pulling out the plug or operating a circuit
breaker.
Do not immerse cord, plug or oven in water.
Keep cord away from heated surfaces. Do not
let cord hang over the edge of table or work top.
Do not plug your oven in via an extension cable
as this can be dangerous. It is important to plug
the oven directly into a wall socket.
The back of the appliance heats up during use.
Do not allow the cord to be in contact with the
back of the appliance or cabinet surface.
Important safety instructions
Please read carefully and keep for future reference
If the fuse cover is detachable, never use
the plug with the cover omitted. If a
replacement fuse cover is required, ensure it
is the same colour as that visible on the pin
face of the plug. A replacement fuse cover
can be purchased from your local Panasonic
Dealer.
HOW TO REPLACE THE FUSE
Open the fuse
compartment with a
screwdriver and
replace the fuse.
Voltage & Power
The voltage used must be the same as
specified on this microwave oven. Using a
higher voltage than that which is specified
is dangerous and may result in a fire or
other type of accident causing damage.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NN-E273 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NN-E273 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info