734676
64
Zoom out
Zoom in
Previous page
1/148
Next page
62
Auto sensor programs
This feature allows you to cook or reheat foods without entering the weight. The built-in
sensor measures the humidity of the food and calculates the recommended microwave
power level and/or combination setting together with a suggested cooking time. To allow
for some variations that occur in food, check that food is thoroughly cooked and piping hot
before serving. Please check carefully and adjust the cooking time if required, as would be
the case with a conventional cooking appliance.
How it works
Once the auto sensor program has been selected and start touched the food is heated up.
As food begins to get hot, steam is emitted. When the food reaches a certain temperature
and begins to cook, an even greater amount of steam is released. The increase in steam
emission is detected by a humidity sensor in the oven. This acts as a signal for the oven to
calculate how much longer the food needs to cook. The remaining cooking time will
appear in the display window after two beeps. Whilst the Sensor program is still in the
display window the oven door SHOULD NOT BE OPENED. Wait until the cooking time
appears in the window, and then open the door if required, to stir or turn the food.
Adjust to Taste
Preferences for degree of cooking vary for each individual. After having used auto sensor
programs a few times, you may decide you would prefer your food cooked to a different
degree of cooking. By using ‘’+/-‘’ the programs can be adjusted to cook food for a longer or
shorter time. After selecting the auto sensor program, tap ‘’+/-’’ or swipe the slider bar before
touching Start. The oven will automatically cook the food 10% more or 10% less.
example
Select desired
Auto Sensor
program. The food
category appears in
the window.
Touch Start. The food category
will be repeated in the display
window. Do not open the oven
door until 2 beeps sound and
cooking time appears in the
display Window.
Optional
()
IMPORTANT NOTE:
1. For best results the Sensor programs should only be used when the oven is cold. It is
recommended that the oven is allowed to cool between using the sensor programs, if
one or more programs are being used. If in a hurry, cook the food manually i.e. select
the correct power level and cooking time. It is not recommended to keep using the auto
sensor programs consecutively.
2. The sensor programs cannot be used when the oven is hot. If “HOT” appears in the
display window, when trying to set a Sensor program, do not touch Stop/Cancel. A fan
will automatically operate to cool the oven within 10-15 minutes, as long as the word
“HOT” is left in the display, otherwise cooling may take longer. If in a hurry, cook the
food manually, i.e. select the correct power level and cooking time.
F0003BH22BP_00_140401.indd 62F0003BH22BP_00_140401.indd 62 2014/4/1 9:42:282014/4/1 9:42:28
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NN-CF853W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NN-CF853W in the language / languages: English as an attachment in your email.

The manual is 20,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info