734751
13
Zoom out
Zoom in
Previous page
1/29
Next page
24 25
Tools
Change settings This feature cannot be used when memory lock is ON. Please cancel memory
lock. (p.27)
Beep To change the loudness of the beep
Default setting: Level3
Depending on the
setting,
Pitch of beep clean
may be displayed.
Select the loudness with + or , and
tap OK .
To change the length of beep at the end of programme
Beeps in three short pulses
every 15 seconds
Beeps in longer pulses
continuously
Beeps in one long pulse then
beeps in three longer pulses
every 30 seconds
The beep stops when you
open the door.
(Default setting: Type1)
Select the length of beep and tap
OK .
To change the tone pitch of the beep at the end of programme
(Default setting: Normal)
Select the tone pitch and tap OK .
To select ON or OFF for the preheated beep (Default setting: ON)
To select ON or OFF for the door alarm (Default setting: ON)
Select
Preheated beep
or
Door alarm
.
Select ON or
OFF , and tap
OK .
The oven returns to the initial screen after displaying the
settings for 3 seconds.
How to Operate the Touch Screen
Cook before preheated ON: You can start cooking before preheating is complete.
OFF: You cannot start cooking until preheat is complete.
(Default setting: OFF)
Note
If you choose ON to start cooking during
preheating, the cooking results may be
affected because the oven cavity temperature
may be low.
Select ON or OFF , and tap OK .
The oven returns to the initial screen after displaying the settings
for 3 seconds.
LCD brightness You can choose the brightness of the touch screen.
Bright
Dark
(Default setting: Level3)
The oven returns to the initial screen after
displaying the settings for 3 seconds.
Select the brightness with + or , and tap OK .
Preheat temperature You can change the preheat temperature displayed on the initial screen.
(Default setting: Preheat 1 → 280°C, Preheat 2 → 250°C)
Please note that the preheat temperature previously saved for the memory
cooking (p.36) will also be changed if you change the setting here.
Select Preheat1
or Preheat2 .
Set Required
temp. From
180°C to 280°C in
10°C increments
Set Cook available
temp. From 180°C
to 280°C in 10°C
increments
Returns to the initial screen after 3 seconds.
Notes
You can start cooking at temperature set at
Cook available temp.
when
Cook before preheated
is set to
ON
.
If the Cook before preheated is set to
OFF
, Cook available temp. setting will be skipped.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NE-SCV2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NE-SCV2 in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NE-SCV2

Panasonic NE-SCV2 User Manual - German, Dutch, French, Italian, Polish, Swedish, Spanish - 379 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info