566614
43
Zoom out
Zoom in
Previous page
1/48
Next page
Installation Instructions - 43
Checking after Installation
Test run after installation
Check for water leakage, abnormal noise,
and proper drainage.
Perform the following procedures
WITHOUT laundry in the drum.
1. Turn on the tap.
2. Close the door.
3. Please spin after moved this washing
machine.
Press the On button. You have to
select “Quick 50” course and “Spin
only” mode. Then, press the Start
button.
After the water is drained, start a test
run.
4. While holding down the Speed/Eco
and Easy Ironing buttons, press the
On button.
5. When the display appears as below
(3 seconds), press the Speed/Eco
button.
The remaining time is displayed as shown
below.
The test is run for approximately 3 minutes.
Check the following:
- Is there any abnormal noise?
If so, make sure that the appliance is
level.
- Is there any water leakage?
If so, make sure that the hoses are
properly connected.
The following errors may occur:
- Are the hoses properly connected?
Is the drain clogged?
- Have you properly connected the water-
supply hose and turned on the tap?
After the appliance has recovered from
an error, reopen and reclose the door to
resume the test.
NA-140_168_148VS4_WGB_En.indb 43 2013/11/06 19:06:42
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NA-148VS4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NA-148VS4 in the language / languages: English as an attachment in your email.

The manual is 8,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic NA-148VS4

Panasonic NA-148VS4 User Manual - German - 48 pages

Panasonic NA-148VS4 User Manual - Dutch - 46 pages

Panasonic NA-148VS4 User Manual - Danish - 46 pages

Panasonic NA-148VS4 User Manual - French - 46 pages

Panasonic NA-148VS4 User Manual - Italian - 48 pages

Panasonic NA-148VS4 User Manual - Swedish - 46 pages

Panasonic NA-148VS4 User Manual - Finnish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info