Assessment of wash loads
After the appliance starts, the wash time
for the rated wash load is displayed, and
then the amount of laundry in the drum
is assessed. During assessment, the
following screen is displayed.
After about 30 seconds, the wash load
is displayed as a percentage of the
wash capacity for the programme. Wash
loads are calculated based upon normal
clothing volumes. Actual results may
vary to some degree due to differences
in types and sizes of clothing.
After about 5 seconds, a new wash time is
displayed and water begins to flow in.
Wash loads are not assessed for the
following programmes.
Wool programme -
Rapid 15 programme -
Shirts programme -
Sportswear programme -
Bedding programme -
Wrinkle-care programme -
Daily programme -
Refresh programme -
The buzzer will sound when the
programme has finished, and the door
will unlock immediately.
The Option function can be used to turn the
buzzer on or off. (See pages 23 and 25.)
Caution
After a high temperature wash, be
careful to not burn yourself when
handling the laundry or touching
the inside of the drum.
Note
If the detergent is not completely -
removed from the laundry by using
the basic programme, use the Extra
Rinse function.
With the Eco and the Speed -
functions, if the load is big, the
laundry may stick to the inside of the
drum. This is normal.
Remove the laundry and rearrange where
necessary. Do not leave it in the drum too
long after the programme ends, because
colours may run.
Assessing Wash Load
Wash Capacity