672200

Panasonic MX-ZX1800 Manual

8
Zoom out
Zoom in
Previous page
1/157
Next page
GB14 GB15
English
Disassembly and assembly of the blender jug base
Disassembly and assembly of the lid unit
Assembly of the ice pack and drip tray
Before Use - Disassembly and Assembly -
<Disassembly>
Attachthejugbaseholderwhilealigningthe▲
marks on the blender jug base and jug base
holder. Then turn it anticlockwise firmly.
1
Pull out the jug base holder.
•Do not press tabs on the jug base holder
to avoid the blender jug base falling.
2
Tab
(Both side)
Press tabs on the jug base holder to release
the blender jug base from it.
3
Tab
(Both side)
1
Attachthejuggasketintothe
groove on the bottom of the
blender jug.
(Failure to install the jug gasket
completely into the groove may
lead to leaking liquids.)
2
Attachthejugbaseholderwhilealigningthe▲
mark on the blender jug base and jug base
holder, then press the jug base holder until you
hear a click sound.
3
Insert the blender jug base into the blender jug
after aligning, then turn the jug base holder
clockwise until it stops turning. (The “O” mark
on the blender jug base will align with the line
on the blender jug.)
<Assembly>
4
Press tabs to remove the jug base holder.
Tab
(Both side)
<Ice pack>
Use the ice pack tape strips to secure the ice pack over and
under the blender jug handle with the label facing the outer side of the pack.
<Drip tray>
Setthedriptrayontothemotorhousingandpushitdowncompletely.
When removing the drip tray after blending, beware of water spillage.
● Pay attention when handling the blender jug base. Blades are sharp.
● If the gasket is not attached to blender jug and/or the blender jug base is not attached firmly onto the
blender jug, liquid may leak out.
Note
Note
1
Pull up the tab to open the lid.
<Disassembly>
2
Turn the cap anticlockwise and pull up to
remove it.
● When you force open the lid unit, be careful not
toletanyliquidsplash.Additionally,take
caution with the emerging steam, especially
when blending hot liquids.
Note
1
2
Attachthelidgasketproperlyontothelid
groove, align the lid with the ▼ mark on the
cap. Then turn the cap clockwise until the ▼
mark on the lid aligns well with the
portion
on the cap and you hear a click sound. (If the
lid gasket is not properly installed, liquid may
leak through the lid.)
Place the lid unit on the blender jug and press
down.
<Assembly>
● When the tamper is not in use, make sure to attach
the cap while blending.
●
When using the “Frozen” menu selection, insert the tamper
from the lid opening instead of attaching the cap.
Correct Incorrect
● Make sure the lid unit is attached firmly.
Note
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic MX-ZX1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic MX-ZX1800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 46,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info