608252
26
Zoom out
Zoom in
Previous page
1/28
Next page
26
VQT2Z88
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies
indicated in the chart do not solve the problem, consult your dealer for instructions.
This unit may become hot if used for a long period of time, however, this is not a problem for use.
Common problems with the whole system
All operations are ignored.
Press [
8
]
¼
of the main unit for more than 10 seconds to turn the unit off. If the problem
persists, do the following operations and return the settings to the factory defaults.
1. Remove the AC adaptor from the household mains socket once. Then connect the AC
adaptor while pressing down [8]
¼
of the main unit.
2.
Press and hold [
8
]
¼
of the main unit until “The settings have been reset. appears on the display.
¼
For Latin America, Asia and Middle East, [POWER 8] is used.
When the unit is turned on, “Please wait.
is displayed for a long period of time.
When photos are present in the internal memory or the SD card has been inserted, it
may take long time for the unit to become operable after it is turned on.
Booming noise occurs during
audio playback.
There may be the AC mains lead of another device or uorescent light near this unit.
Keep the electric appliances as far away as possible from this unit.
SD
Data on the SD card cannot be
read.
Use an SD card compatible with this unit. The le format and the folder hierarchy in the
SD card must conform to the speci cations of this unit.
Photos cannot be played or
copied etc.
Insert the SD card compatible with this unit. (¼P3)
Insert the SD card correctly. (¼P4)
Cancel the write protection switch if it is on the “LOCK” side. (¼P6)
iPod/iPhone
The iPod/iPhone is not recognized
even if connected, or unexpected
operations occur in use.
Check if the iPod/iPhone is compatible with this unit. (¼P3)
Connect the iPod/iPhone again. (¼P15)
Video playback becomes
impossible on the iPod/iPhone.
Con rm the iPod/iPhone video settings.
The display of the iPod/iPhone video
playback shows an unexpected one.
Con rm the iPod/iPhone video settings.
Example: Set the TV signal to “NTSC” on the iPod/iPhone video setting.
iPod/iPhone videos cannot be played back.
Check your iPod/iPhone version.
Only images on iPod/iPhone
videos cannot be displayed.
Select “Videos” in the iPod menu again.
Photo
Photos are not displayed on the
thumbnail screen.
Photos edited on the computer, etc. may not be displayed.
The date displayed using the Date
Search differs from the shooting date.
A date when a le was updated may be displayed for photos edited on the computer,
etc.
Editing (copying, etc.) takes long time.
When there are many les and folders, editing may take long time.
Photos are not played back in the
order of le names even if the
“Slideshow Order” is set to “Normal”.
If 9 or more characters are assigned as a photo le name (excluding the le extension)
on a computer, etc., the les may not be played back in order of le names.
Remote control
Cannot operate the remote
control.
Insert (+, –) of battery correctly. (¼P5)
Replace with the new battery. (¼P5)
If the remote control mode on the main unit does not match the one on the remote
control, match the mode of the remote control to the one of the main unit. (¼P21)
Another device does not operate
properly when using the remote
control of this unit.
The unit does not operate
properly when using the remote
control of another device.
Change the remote control mode of this unit so another device does not interfere with
this unit’s operation. (¼P21)
Error message
A communication error occurred.
Connect the iPod/iPhone correctly. (¼P15)
Set the mode on your remote
control to “Mode 1” (or “Mode 2”).
The remote control mode settings do not match the main unit settings.
Change the remote control mode on the remote control. (¼P21)
F76 The unit turns off after the message. Abnormal power circuit. If the message still
remains even if the power is turned on again, consult your dealer.
Troubleshooting guide
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic MW20GC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic MW20GC in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info