316846
11
Zoom out
Zoom in
Previous page
1/14
Next page
11
2
HOW TO REPLACE - DRIVE BELT TYPE UB-1L /
BEATER BAR ASSEMBLY
1. Remove the 4 screws from the base plate and lift
it off. (Fig. 1)
2. Release the belt from the motor shaft and lift the
beater bar assembly to remove the belt. (Fig. 2)
3. To reassemble the beater bar assembly, simply
return the belt to the motor shaft and beater bar
pulley.
Re-insert the beater bar mounts to their holding
points, and turn the beater bar to ensure that the
belt has been seated correctly.(Fig. 3)
IMPORTANT: On model MC-E464, when
replacing the belt, make sure it is placed between
the screw and the inside cover rib, as indicated.
4. Replace the base plate and re-fasten the screws
securely.
HOW TO REPLACE - BEATER BAR / SIDE
BRUSHES / BEARING SUPPORT A-B
1. First remove the base plate, drive belt and lift out
the rotary brush assembly (as illustrated above).
2. Remove the 2 screws at both ends of the rotary
brush assembly and separate the different parts
as shown in the exploded view.
3. Replace any damaged part and reassemble in
reverse order.
. Beater bar
. Side brush
. Bering support A
. Bearing support B
REMOVE PLUG BEFORE
REMOVING THIS COVER
4
1
3
2
Fig. 2
Fig. 3
Fig. 1
4
3
2
1
SERVICING AND REPAIRS
Before replacing any part DISCONNECT THE CLEANER FROM THE MAINS SUPPLY.
We always recommend you use genuine Panasonic replacement parts only.
If you have any query, contact your local Panasonic dealer / service agent.
To replace any of the following parts, place the vacuum cleaner in the horizontal
position by using the pedal. Then turn it over exposing the underside.
MC-E464 only
Screw
Cover
rib
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic mc e 469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic mc e 469 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info