502304
22
Zoom out
Zoom in
Previous page
1/48
Next page
22
IDENTIFICATION OF MAIN PARTS
USING THE APPLIANCE
Operating the appliance
Assemble the curved wand, telescopic wand and oor nozzle together. Connect the curved wand and the oor nozzle to the telescopic wand by inserting
and twisting one another. To disconnect them, twist and pull them off from each other.
Pull out the mains lead and insert the plug into the socket outlet.
Press the OFF/ON switch pedal to turn on the appliance.
Press on the mark not the edge of the OFF/ON switch pedal.
Adjust power by rotating the power control.
1. 3. 4.
Parking and storing
Perform the following before storing.
Turn off the appliance, and then remove the plug from the socket outlet.
Press the cord rewind pedal to rewind the mains lead. Hold the plug to
ensure the mains lead does not jump.
Press on the
mark not the edge of the cord rewind pedal.
1.
2.
3.
4.
1.
2.
Replacing the dust bag
Replace the dust bag to the new one in the following cases:
– When the dust bag is full. For more details on the dust indicator, see identi cation of main parts.
– When suction power has dropped.
Open the dust cover, and then pull out the dust bag.
Place a new dust bag, and then close the dust cover.
If the dust bag is not properly installed, the dust cover cannot be closed.
If suction power does not return, check for blockages in hose, telescopic wand, nozzles and pre-motor lter.
1. 2.
1.
2.
Cord Rewind Pedal
DUSTING BRUSH
CREVICE NOZZLE
Carpet
Parquet/Bare Floor
Floor Nozzle
(only for MC-CG524)
Telescopic Wand
Suction Regulator
Crevice Nozzle and
Dusting Brush
Hose Unit
Connection Pipe
Dust Indicator
OFF/ON Switch
Pedal
Mains Lead
Power Control
Exhaust Filter
a) HEPA Filter (only for MC-CG524)
b) Electrostatic Filter
(only for MC-CG522)
Cord Rewind Pedal
Use this function when
strong suction causes the
nozzle to stick to the oor,
hindering movement.
To check whether the dust bag is full, turn the
power control to the highest setting and lift the
nozzle off the oor. If the dust indicator turns red,
the dust bag is full.
Curved Wand
Floor Nozzle
(only for MC-CG522)
TELESCOPIC WAND
Dust Cover
Accessory
Holder
Pre-Motor Filter (in body)
Dust Bag (in body)
Store the supplied nozzles.
Park position
Storage position
3.
Telescopic Wand
Curved Wand
Floor Nozzle
Power Control
OFF/ON
Switch Pedal
Plug
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic MC-CG522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic MC-CG522 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info