289973

Panasonic lumix dmc zs1 Manual

58
Zoom out
Zoom in
Previous page
1/64
Next page
114 VQT2C11 VQT2C11 115
Try checking these items (P.114 - 119) first.
(Restoring menu settings to default values may solve certain problems.
Try using ‘RESET’ in SETUP menu in recording mode (P.22).)
Q&A
Troubleshooting
Battery, power
Camera does not work even if power is turned on.
Battery is not inserted correctly (P.13), or needs recharging (P.11).
LCD monitor shuts off even if power is turned on.
Camera is set to ‘POWER SAVE’ or ‘AUTO LCD OFF’ (P.21).
→ Press shutter button halfway to release.
Battery needs recharging.
Camera switches off as soon as power is turned on.
Battery needs recharging.
Camera is set to ‘POWER SAVE’. (P.21)
→ Press shutter button halfway to release.
This unit is turned off automatically.
If you connect to a TV compatible with VIERA Link with an HDMI mini cable (optional)
and turn off the power on the TV with the remote control for the TV, the power on this
unit also turns off.
→ If you are not using VIERA Link, set ‘VIERA Link’ to ‘OFF’. (P.24)
Recording
Cannot record pictures.
REC/PLAY switch is not set to (record).
Built-in memory/card is full. → Free space by deleting unwanted pictures (P.39).
Cannot record to cards.
Do not format cards on other equipment.
→ Please format cards with this camera. (P.24)
For details about compatible cards, see P.14.
Recording capacity is low.
Battery needs recharging .
→ Use a fully charged battery (not sold pre-charged). (P.11)
→ If you leave the camera on, the battery will be exhausted. Turn the camera off
frequently by using ‘POWER SAVE’ or ‘AUTO LCD OFF’ (P.21) etc.
Please check the recording picture capacity for cards and built-in memory.
( P.122, P.124)
Recorded pictures look white.
Lens is dirty (fingerprints, etc.).
→ Turn on power to extract lens barrel, and clean lens surface with a soft, dry cloth.
Lens is foggy (P.8).
Recorded pictures are too bright/too dark.
Pictures taken in dark locations, or bright subjects (snow, bright conditions,
etc.) occupy most of the screen. (Brightness of LCD monitor may differ from
that of actual picture) → Adjust the exposure (P.47).
‘MIN. SHTR SPEED’ is set to fast speeds, e.g. ‘1/250’ (P.76).
2-3 pictures are taken when I press the shutter button just once.
Camera set to use ‘AUTO BRACKET’ (P.47), ‘MULTI ASPECT ’ (P.48), ‘BURST’
(P.74), or the ‘HI-SPEED BURST’ (P.54) or ‘FLASH BURST’ (P.55) scene modes.
Recording (continued)
Focus not aligned correctly.
Not set to mode appropriate for distance to subject. (Focus range varies according to recording mode.)
Subject outside of focus range.
Caused by jitter or subject movement (P.68, 75).
Recorded pictures are blurred. Optical image stabilizer ineffective.
Shutter speed is slower in dark locations and Optical image stabilizer is less effective.
→ Hold camera firmly with both hands, keeping arms close to body.
Use a tripod and the self-timer (P.46) when using slower shutter speed with ‘MIN. SHTR SPEED’.
Cannot use ‘AUTO BRACKET’ or ‘MULTI ASPECT ’.
Only enough memory for 2 pictures or fewer.
Recorded pictures appear coarse, or there is interference.
ISO sensitivity is high, or shutter speed is low.
(Default SENSITIVITY setting is ‘AUTO’ – interference may appear with indoor pictures.)
→ Lower ‘SENSITIVITY’ (P.69).
→ Set ‘COLOR MODE’ to ‘NATURAL’ (P.75)
→ Take pictures in brighter locations.
Camera set to ‘HIGH SENS.’ or ‘HI-SPEED BURST’ scene modes.
(Picture becomes slightly coarser in response to high sensitivity)
Pictures appear dark or have poor colouring.
Colours may appear unnatural due to the effects of light source.
→ Use WHITE BALANCE to adjust the colouring. (P.70)
Brightness or colouring of recorded picture different from real life.
Taking pictures under fluorescent lighting may require a faster shutter speed and
result in slightly changed brightness or colouring, but this is not a fault.
Reddish vertical line (smear) appears during recording.
This is a characteristic of CCD and may appear if subject contains brighter
areas. Some blurring may occur around these areas, but this is not a fault.
This will be recorded in motion pictures, but not in still pictures.
We recommend keeping the screen away from strong light sources
such as sunlight when taking pictures.
Motion picture recording stops midway.
Using MultiMediaCard (not compatible with motion picture recording).
Using a card of SD speed ‘Class 6’ or above is recommended for recording motion pictures.
The SD speed class is a speed rating for continuous writing.
Using a high-speed card with a specified speed (e.g. on packaging) of at least 10
MB/s is recommended when ‘REC QUALITY’ is set to ‘HD’, ‘WVGA’, or ‘VGA’.
If recording stops even when using a ‘Class 6’ card or card with speed of ‘10 MB/s’
or faster, the data writing speed is low. We recommend backing up the data on the
memory card and reformatting it (P.24).
With some cards, access display may appear briefly after recording, and recording
may end midway.
The subject cannot be locked. (AF track fails)
If the subject has different colours as the periphery, set the AF area to those colours
specific to the subject by aligning that area with the AF area. (P.71)
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic lumix dmc zs1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic lumix dmc zs1 in the language / languages: English as an attachment in your email.

The manual is 8,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info