103532
90
Zoom out
Zoom in
Previous page
1/120
Next page
90
VQT1C63
Connecting to other equipment
• [PAGE LAYOUT]
(Possible layouts on the camera)
F
Settings on the printer are
prioritized.
G
1 page with no frame print
H
1 page with frame print
I
2 pages print
J
4 pages print
An item cannot be selected if the
printer does not support the page
layout.
Layout printing
When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [J] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
When printing different pictures on 1
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper,
set [PAGE LAYOUT] to 4-picture printing
[J] and then set [NUM. OF PRINTS]
for the pictures to 1.
Do not disconnect the USB connection
cable when the cable disconnection
warning icon [K] is indicated.
(Depending on the printer, the icon may
not be displayed.)
If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks
and the alarm beeps. If this happens
during printing, press [MENU/SET] and
stop printing at once. If not printing,
disconnect the USB connection cable.
The camera is receiving an error
message from the printer when the [*]
indication lights orange during printing.
After nishing printing, make sure there
are no problems with the printer.
If the total number of ordered prints or
the number of pictures set for print is
large, printing is performed at intervals.
In such cases, the number of remaining
prints shown on the display will differ
from the number of prints you set. The
discrepancy, however, does not indicate
an error.
Date print function on the printer may
have priority over the same settings on
the camera. Check the setting on the
printer as well.
When the mode dial is set to a choice
other than print mode [ ], [USB MODE
CHANGED. PLEASE REMOVE THE
USB CABLE.] appears on the camera’s
LCD monitor. Set the mode dial back
to [ ] before disconnecting the USB
connection cable. Disconnect the USB
connection cable after canceling printing.
When you want to print pictures with
date, the [DATE STAMP] function (P75)
is also useful. Note that if you use date
stamp and then specify printing the
date when you order prints or on a
printer, both dates will be printed and
may overlap.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC-LS70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC-LS70 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Lumix DMC-LS70

Panasonic Lumix DMC-LS70 User Manual - German - 112 pages

Panasonic Lumix DMC-LS70 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info