103532

Panasonic Lumix DMC-LS70 Manual

4
Zoom out
Zoom in
Previous page
1/120
Next page
P
For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA assistance, please call: 1-800-272-7033 or send e-mail to : digitalstillcam@us.panasonic.com
Operating Instructions
Digital Camera
Model No.DMC-LS75
DMC-LS70
DMC-LS60
Before connecting, operating or
adjusting this product, please read the
instructions completely.
The illustration shows
DMC-LS75.
PC
VQT1C63-1
2
VQT1C63
Before Use
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure
it will bring you and your family years of
enjoyment. Please take time to fi ll in the
information in the box below.
The serial number is on the tag located
on the underside of your Camera. Be sure
to retain this manual as your convenient
Camera information source.
Model No.
Serial No.
Information for Your
Safety
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE,
* DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL
BE PLACED ON THE APPARATUS.
* USE ONLY THE RECOMMENDED
ACCESSORIES.
* DO NOT REMOVE THE COVER
(OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Carefully observe copyright laws.
Recording of pre-recorded tapes or
discs or other published or broadcast
material for purposes other than your
own private use may infringe copyright
laws. Even for the purpose of private
use, recording of certain material may
be restricted.
• Please note that the actual controls
and components, menu items, etc.
of your Digital Camera may look
somewhat different from those shown
in the illustrations in these Operating
Instructions.
• SDHC Logo is a trademark.
• Other names, company names,
and product names printed in these
instructions are trademarks or registered
trademarks of the companies concerned.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.
Marking sign is located on bottom of the
unit.
3
VQT1C63
Before Use
THE FOLLOWING APPLIES ONLY IN
THE U.S.A.
FCC Note: (U.S. only)
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: To assure continued
compliance, follow the
attached installation
instructions and use only
shielded interface cables
with ferrite core when
connecting to computer or
peripheral devices.
Any changes or modifi cations not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-LS75
DMC-LS70
DMC-LS60
Responsible party: Panasonic
Corporation of North
America
One Panasonic Way,
Secaucus, NJ 07094
Support Contact: Panasonic Consumer
Electronics Company
1-800-272-7033
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
Only for Canada
This Class B digital apparatus complies
with Canadian ICES-003.
Only for U.S.A.
DMC-LS75
DMC-LS70
DMC-LS60
4
VQT1C63
Before Use
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid
in the European Union.
If you wish to discard
this product, please
contact your local
authorities or dealer
and ask for the correct
method of disposal.
■ Care for the camera
• Do not strongly shake or bump
the camera. The camera may not be
operated normally, recording of pictures
may be disabled or the lens and the LCD
monitor may be damaged.
• Sand or dust may cause the camera
to malfunction. Make sure that sand
or dust does not get into the lens, the
fl ash or the terminals when using the
camera on a beach etc.
• Make sure that water does not get into
the camera when using it on a rainy day
or on a beach.
• This camera is not waterproof.
In case the camera comes into contact
with water, wipe it off with a dry cloth.
When the camera does not operate
normally, contact your dealer or your
nearest Service Center.
■ About the LCD monitor
• Do not press the LCD monitor with
excessive force. Uneven colors may
appear on the LCD monitor and it may
malfunction.
• Condensation may form on the LCD
monitor in places with large temperature
differences. Wipe the condensation with
a soft, dry cloth.
• If the camera is cold when you turn it on,
the picture on the LCD monitor will be
slightly darker than usual at fi rst.
However, the picture will return to normal
brightness when the internal temperature
of the camera increases.
Extremely high precision technology
is employed to produce the LCD
monitor screen. However there may
be some dark or bright spots (red,
blue or green) on the screen. This is
not a malfunction. The LCD monitor
screen has more than 99.99% effective
pixels with a mere 0.01% of the pixels
inactive or always lit.
The spots will not be recorded in
pictures stored in the built-in memory
or a card.
5
VQT1C63
Before Use
■ About the Lens
• Do not press the lens or the lens barrel
with excessive force.
• Do not leave the camera with the lens
facing the sun as it may cause the
camera to malfunction. Also, be careful
when you leave the camera outside or
near a window.
■ About Condensation (When the lens
is fogged up)
• Condensation occurs when the ambient
temperature or humidity changes
as described below. Be careful of
condensation since it causes lens stains,
fungus and camera malfunction.
– When the camera is taken from the
cold outdoors to the warm indoors
– When the camera is taken from outside
to inside an air-conditioned car
– When cool wind from an air conditioner
etc. blows directly on the camera
– In humid places
• To prevent condensation, put the camera
in a plastic bag until the temperature
of the camera is close to the ambient
temperature. If condensation occurs,
turn the camera off and leave it for
about 2 hours. The fog will disappear
naturally when the temperature of the
camera becomes close to the ambient
temperature.
■ When not using the camera for a long
period of time
• Store the batteries in a cool and dry
place with a relatively stable temperature.
[Recommended temperature:
15 °C to 25 °C (59 °F to 77 °F),
Recommended humidity: 40% to 60%]
• Always remove the batteries and the card
from the camera.
• If the batteries are left inserted in the
camera they will discharge as a weak
electric current passes through them
even if the camera is turned off. [Read
P12 for information about Ni-MH (nickel
metal hydride) batteries.]
• We recommend storing the camera with
a desiccant (silica gel) when you keep it
in a closet or a cabinet.
■ About cards that can be used in this
unit
You can use an SD Memory Card,
an SDHC Memory Card and a
MultiMediaCard.
• When the term card is used in these
operating instructions this refers to the
following types of Memory Cards.
– SD Memory Card (8 MB to 2 GB)
– SDHC Memory Card (4 GB)
– MultiMediaCard
More specifi c information about memory
cards that can be used with this unit.
• You can only use an SDHC Memory
Card if using cards with 4 GB or more
capacity.
• A 4 GB Memory Card without an SDHC
logo is not based on the SD Standard
and will not work in this product.
6
VQT1C63
Contents
Before Use
Information for Your Safety ...................... 2
Preparation
Standard Accessories .............................. 8
Names of the Components ...................... 9
Quick Guide ........................................... 10
About the Batteries ................................ 11
Inserting/Removing the Batteries/Card
(Optional) ........................................... 15
About the Built-in Memory/the Card ...... 16
Setting Date/Time (Clock Set) ............... 17
• Changing the clock setting .............. 17
About the Mode Dial .............................. 18
Using the Menus .................................... 19
About the Setup Menu ............................ 21
LCD monitor and changes to
the display .......................................... 24
Basic
Taking Pictures ...................................... 25
• Photography basics –
exposure, focus, and color ............... 26
Taking Pictures in Simple Mode ............ 28
Taking Pictures with the Zoom .............. 30
• Using the Optical Zoom/the Extended
Optical Zoom (EZ) ........................... 30
• Using the easy zoom button ............. 31
• Using the Digital Zoom .................... 32
Checking the Recorded Picture
(Review) ............................................ 33
Playing Back Pictures ............................ 34
Deleting Pictures ................................... 35
Advanced-Shooting
About the LCD Monitor .......................... 37
• Changing the information
displayed .......................................... 37
• Recording a picture with the camera
held high above your head
(High angle mode) ........................... 39
Taking Pictures using the
Built-in Flash ...................................... 40
Taking Pictures with the Self-timer ........ 43
Compensating the Exposure ................. 44
Shooting with the Intelligent
ISO mode ........................................... 45
Taking Close-up pictures ....................... 46
Scene mode .......................................... 47
– Portrait mode .............................. 48
– Soft skin mode ............................ 48
– Scenery mode ............................ 48
– Sports mode ............................... 48
– Night portrait mode ..................... 48
– Night scenery mode .................... 49
– Food mode ................................. 49
– Party mode ................................. 49
– Candle light mode ....................... 49
– Sunset mode ............................... 50
– Baby mode 1 .............................. 50
– Baby mode 2 .............................. 50
– Pet mode ..................................... 50
– High Sensitivity mode ................. 51
– Beach mode ............................... 51
– Starry sky mode .......................... 51
– Fireworks mode .......................... 52
– Snow mode ................................. 52
– Aerial photo mode ...................... 52
Motion picture mode .............................. 53
Recording which day of the vacation
you take the picture ........................... 55
Displaying the time at the travel
destination ......................................... 57
7
VQT1C63
Using the [REC] mode menu ................. 59
• [W.BALANCE] .................................. 60
• [SENSITIVITY] ................................. 61
• [ASPECT RATIO] ............................. 62
• [PICT.SIZE]/[QUALITY] ................... 62
• [AF MODE] ...................................... 63
• [STABILIZER] ................................... 64
• [BURST] ........................................... 65
• [AF ASSIST LAMP] ......................... 66
• [COL.MODE] .................................... 66
• [CLOCK SET] ................................... 66
Q
Advanced-Viewing
Displaying Multiple Screens
(Multi Playback) ................................. 67
Displaying pictures by recording date
(Calendar playback) .......................... 68
Using the Playback Zoom ...................... 69
Playing Back Motion pictures ................ 70
Using the [PLAY] mode menu ............... 71
• [SLIDE SHOW] ................................. 72
• [FAVORITE] ..................................... 73
• [ROTATE DISP.]/[ROTATE] ............. 74
• [DATE STAMP] ................................ 75
• [DPOF PRINT] ................................. 77
• [PROTECT] ...................................... 79
• [RESIZE] .......................................... 80
• [TRIMMING] ..................................... 81
• [COPY] ............................................. 82
• [FORMAT] ........................................ 83
Connecting to other equipment
Connecting to a PC ............................... 84
Connecting to a PictBridge-compliant
Printer ................................................ 87
Playing Back Pictures with a
TV Screen .......................................... 91
Others
Screen Display ....................................... 92
Cautions for Use ..................................... 94
Message Display .................................... 96
Troubleshooting ...................................... 98
Number of recordable pictures and
available recording time .................... 104
Specifi cations ....................................... 107
Digital Camera Accessory System ....... 110
Digital Camera Accessory Order Form
(For USA Customers) ...................... 111
Request for Service Notice
(For USA Only) ................................ 112
Limited Warranty (For USA Only) ........ 113
Customer Services Directory
(For USA Only) ................................ 115
Précautions à prendre (pour les clients
canadiens) ........................................ 116
Index .................................................... 118
8
VQT1C63
Preparation
Standard Accessories
Before using your camera, check the contents.
■ Batteries
AA Oxyride batteries (ZR6)
■ Video Cable
K1HA08CD0015
■ USB Connection Cable
K1HA08CD0013
■ CD-ROM
■ Strap
VFC4090
• Card is optional.
You can record or play back pictures
on the built-in memory when you are
not using a card. (P16)
• For information about optional
accessories, please refer to “Digital
Camera Accessory System”. (P110)
• If any of the accessories are lost, please
contact Panasonic’s parts department at
1 800 833-9626 (For USA) or in Canada
call 1 800 995-8649 for more details on
how to obtain replacement parts.
■ About illustrations in these operating
instructions
Please note that the appearance of the
product, the illustration or the menu screen
are a little different from those in actual
use.
The illustrations in these operating
instructions show DMC-LS75.
9
VQT1C63
Preparation
Names of the Components
20 Tripod Receptacle
• When you use a tripod, make sure
the tripod is stable with the camera
attached to it.
21 Battery Door (P15)
1 [E. ZOOM] (Easy Zoom) Button (P31)
2 Zoom Lever (P30)
3 Shutter Button (P25, 53)
4 Mode Dial (P18)
5 Flash (P40)
6 Self-timer Indicator (P43)
AF Assist Lamp (P66)
7 Lens part (P5)
8 Lens barrel
9 [DC IN] Socket (P84, 87)
• Always use a genuine Panasonic AC
adaptor (DMW-AC6: optional).
10 [V.OUT/DIGITAL] Socket
(P84, 87, 91)
11 LCD Monitor (P37, 92)
12 [MENU/SET] Button (P17)
13 Camera Switch (P17)
14 Status Indicator (P25)
15 Cursor buttons
w /Self-timer Button (P43)
r /[REV] Button (P33)
q /Flash Mode Button (P40)
e /Backlight Compensation in Simple
Mode (P29)/Exposure Compensation
(P44) Button
• In these operating instructions,
operations using the cursor buttons
are described as follows.
e.g.: When you
press the r
button.
16 [DISPLAY] (P37)/ [HIGH ANGLE] (P39)
Button
17 [FUNC] (function) (P59)/Delete (P35)
Button
18 Card Door (P15)
19 Strap Eyelet
• To remove the strap, use a pointed
object to undo the knot.
V.OUT
DIGITAL
DC IN
3V
123 4 5
6
78
910
20 21
1
2
11 12 13
14
15
16 18
19
17
10
VQT1C63
Preparation
Quick Guide
This is the overview of the procedure
to record pictures with this camera. For
each operation, be sure to refer to the
corresponding pages.
1 Insert the batteries. (P15)
• When you do not use the card
(optional), you can record or
play back pictures on the built-in
memory (P16). Refer to P15 when
you use a card.
2 Turn the camera on to take
pictures.
• Set the clock. (P17)
• Select the type of battery in use on
[BATTERY TYPE] in the [SETUP]
menu. (P21)
1 Set the mode dial to [ ].
2 Press the shutter button to take
pictures. (P25)
3 Play back the pictures.
1 Set the mode dial to [Q].
2 Select the picture you want to view.
(P34)
S
C
N
1
2
2
1
SCN
11
VQT1C63
Preparation
About the Batteries
■ Usable batteries
AA Oxyride batteries (supplied)*
AA Alkaline batteries (optional)
AA Rechargeable Ni-MH (nickel metal
hydride) batteries (optional)
• One of the following messages
appears when you insert batteries for
the fi rst time, change the batteries
when they become exhausted etc.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE]/[CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
If the batteries inserted are different
from the type displayed in the
message, set [BATTERY TYPE] in the
[SETUP] menu. (P21)
• The battery type that is set can be
distinguished by the color of the
battery indication (blue or white).
– The battery indication does not
appear when using the AC adaptor
(DMW-AC6; optional).
A:When oxyride batteries are selected
The battery indication turns blue.
B:When alkaline/Ni-MH batteries are
selected
The battery indication turns white.
* An oxyride battery is a new type of
non-rechargeable battery developed by
Panasonic.
It has more power than a regular alkaline
battery and is suitable for high-drain
equipment such as digital cameras.
• We recommend using Panasonic
batteries.
• Battery performance may vary greatly
depending on the brand used and
the storage life and conditions of the
batteries.
• Battery performance temporarily
deteriorates in low temperature
conditions [10 °C (50 °F) or less].
However, it recovers when the
temperature returns to normal.
• Depending on the temperature and the
conditions of use, the camera may not
operate properly and the batteries may
become exhausted without warning
because the battery indication is
not displayed correctly. This is not a
malfunction.
• We recommend turning the camera off
frequently while recording to conserve
battery power for longer battery life. If
you will be using the camera for long
periods of time, using rechargeable Ni-
MH batteries is recommended.
• Exhausted batteries may recover some
performance if left for a period of time.
However, they cannot be used for a long
time. Be sure to replace them with new
batteries.
■ Unusable batteries
Manganese
batteries
Lithium batteries
Nickel batteries Ni-Cd batteries
• Operation is not guaranteed when using
the batteries listed above. The batteries
can leak and the following malfunctions
can occur:
– The remaining battery power is not
displayed accurately.
– The camera does not turn on.
– Data written to the built-in memory
or the card is damaged resulting in
loss of the photographs.
3
A
:
B
:
7M
12
VQT1C63
Preparation
■ Battery shapes that cannot be used
• Batteries with unusual shapes cause
leakage, heat generation or explosion if
inserted in the camera.
• Batteries with the covering partly or fully
peeled off. Never use these batteries.
(Refer to the illustration below.)
• All or part of the
covering on the
battery is peeled
off.
• The ) pole is fl at.
■
Proper Care and Handling of Batteries
Mishandling batteries may cause leakage,
heat generation, fi re or explosion. Observe
the following.
• Do not heat or expose to fl ame.
• Do not splash batteries with water/sea
water or wet battery terminals.
• Do not peel off or scratch the covering on
batteries.
• Do not drop, throw or subject batteries to
other strong impacts.
• Do not use batteries that show signs of
leakage, deformation, discoloration etc.
• Do not store batteries in high humidity
areas or high temperatures.
• Keep batteries away from children.
• Always use 2 new batteries of the same
type when replacing batteries.
• Remove the batteries if you do not intend
to use the unit for a long time.
• Batteries may heat up soon after you
start using the unit. Turn the camera off
and wait until the battery temperature
decreases before removing them.
• Battery performance deteriorates and
recording/playback time decreases when
the ambient temperature is low [10 °C
(50 °F) or less]. This is particularly true
when using oxyride or alkaline batteries
so warm them in your pocket etc. before
using them. Make sure that no metal
objects such as a lighter are placed
together with the batteries when warming
them in your pocket.
• If there is grease or dirt on the battery
poles, the recording/playback time may
become extremely short. Before inserting
the batteries, clean the battery terminals
with a soft, dry cloth.
If battery leakage occurs, remove the
batteries and thoroughly wipe the leakage
in the battery compartment. Insert new
batteries or fully charged Ni-MH batteries.
If battery electrolyte spills on your hands
or clothes, thoroughly wash them with
water. Battery electrolyte can cause loss
of sight if it comes into contact with your
eyes. Do not rub your eyes. Wash them
immediately with clean water and consult
a doctor.
■
Ni-MH Batteries (Nickel Metal Hydride)
You can use Ni-MH batteries after charging
them with a nickel metal hydride battery
charger. However, improper handling of
the batteries may cause leakage, heat
generation, fi re or explosion. Observe the
following.
• If rechargeable batteries are to be used,
rechargeable batteries manufactured by
Panasonic are recommended.
• If there is dirt on the battery poles, you
may not be able to charge normally.
Clean the battery poles and the battery
recharger terminals with a soft, dry cloth.
• When charging batteries for the fi rst time,
or after having not used them for a long
period of time, they may not charge fully.
This is a feature of Ni-MH batteries and
is not a malfunction. Battery performance
will become normal after a few charges
and discharges.
13
VQT1C63
Preparation
• We recommend charging the batteries
after they are fully discharged. If you
charge the batteries before they are
fully discharged, it can reduce battery
performance. This is called “memory
effect”.
• If “memory effect” occurs, continue using
the batteries until the camera stops
working and then charge them fully.
Battery performance will be restored after
a few charges and discharges.
• Over time Ni-MH batteries naturally
discharge and their capacity lowers even
when they are not used.
• Once the batteries have reached full
charge, do not continue to charge them.
• Do not peel off or scratch the covering on
Ni-MH batteries.
• Read the operating instructions for the
battery charger.
Ni-MH batteries have a limited life. Battery
capacity gradually decreases over time. If
the length of time you can use the camera
is extremely short even after fully charging
the batteries, they may have exceeded
their life span. Purchase new batteries.
• Battery life differs depending on the
conditions of storage and usage and the
environment.
When not using the batteries for a long
period of time
• If the batteries are left in the camera
they will discharge. This is because a
small electrical current continues to fl ow
even when the camera is turned off. If
the batteries continue to be left in the
camera, they will discharge excessively
and may become unusable even if
charged.
• When storing the batteries for a long
period of time, we recommend charging
them once a year. Remove the batteries
from the camera and store them again
after they have completely discharged.
■ Battery life
The number of recordable pictures (By
CIPA standard in normal picture mode)
Batteries Used
Number of recordable
pictures (Approx.)
DMC-LS75/
DMC-LS70
DMC-LS60
Panasonic Oxyride
batteries
(supplied or optional)
250 pictures
(125 min)
260 pictures
(130 min)
Panasonic Alkaline
batteries (optional)
150 pictures
(75 min)
160 pictures
(80 min)
Fully charged
Panasonic Ni-MH
batteries (optional)
460 pictures
(230 min)
470 pictures
(235 min)
Recording conditions by CIPA standard
•
Temperature: 23 °C (73.4 °F)/
Humidity: 50% when the LCD monitor is on.
• Using a Panasonic SD Memory Card
(16 MB)*
* The card is not supplied.
• Starting recording 30 seconds after
the camera is turned on. (When the
optical image stabilizer function is set to
[MODE1])
• Recording once every 30 seconds,
with full fl ash every second recording.
• Rotating the zoom lever from Tele to
Wide or vice versa in every recording.
• Turning the camera off every 10
recordings./Leaving the camera until the
batteries cool down.
• CIPA is an abbreviation of [Camera &
Imaging Products Association].
The number of recordable pictures
varies depending on the recording
interval time. If the recording interval
time becomes longer, the number of
recordable pictures decreases.
(e.g. When recording once every 2
minutes: about 1/4 the number when
recording once every 30 seconds)
14
VQT1C63
Preparation
The number of recordable pictures in
low temperatures (In normal picture
mode when the temperature is 0 °C
(32 °F) and other recording conditions
comply with CIPA standard.)
Batteries Used
Number of recordable
pictures (Approx)
DMC-LS75/
DMC-LS70
DMC-LS60
Panasonic Oxyride
batteries
(supplied or optional)
50 pictures
(25 min)
55 pictures
(27 min)
Panasonic Alkaline
batteries (optional)
40 pictures
(20 min)
45 pictures
(22 min)
Fully charged
Panasonic Ni-MH
batteries (optional)
380 pictures
(190 min)
390 pictures
(195 min)
• Please note that the performance
of oxyride batteries and alkaline
batteries signifi cantly decreases in low
temperature conditions.
Playback time
Batteries Used
Continuous playback
time (Approx.)
DMC-LS75/
DMC-LS70
DMC-LS60
Panasonic Oxyride
batteries
(supplied or optional)
430 min 440 min
Panasonic Alkaline
batteries (optional
)
420 min 430 min
Fully charged
Panasonic Ni-MH
batteries (optional)
610 min 620 min
• The number of recordable pictures and
playback time will vary depending on the
operating conditions and how the battery
is stored.
•
The number of recordable pictures and
the playback time will also vary depending
on the brand and type of batteries used.
• We recommend using power save mode
(P21) or economy mode (P22) or turning
off the camera frequently while recording
to maintain battery power.
15
VQT1C63
Preparation
• Check that the camera is turned off.
• Use oxyride batteries (supplied), alkaline
batteries (optional) or Ni-MH batteries
(optional).
• Prepare an SD Memory Card (optional),
an SDHC Memory Card (optional) or a
MultiMediaCard (optional).
• You can record or play back pictures
on the built-in memory when you are
not using a card. (P16)
1 Slide the battery door A or the
card door B to open it.
2 Batteries:
Insert the batteries with the ( and )
poles aligned correctly.
Card:
Insert the card with the label side
facing the back of the camera until it
clicks and locks.
To remove the card, push the card
until it clicks, then pull the card out
upright.
• Do not touch the connection terminals on
the back side of the card.
• The card may be damaged if it is not fully
inserted.
3 1 Close the battery door or the
card door.
2 Slide the battery door or the
card door to the end and then
close it fi rmly.
• If the card door cannot be completely
closed, remove the card, check its
direction and insert it again.
• Select the battery type being used
in [BATTERY TYPE] in the [SETUP]
menu. (P21)
• Remove the batteries after use.
• Remove the batteries after the LCD
monitor and the status indicator
(green) turn off. Otherwise, the
settings on the camera may not be
stored properly.
• Do not remove or insert the batteries
or the card while the unit is on
particularly while accessing the built-
in memory or the card (P24). This can
damage data.
• We recommend using Panasonic’s SD
Memory Card/SDHC Memory Card.
Inserting/Removing the Batteries/Card (Optional)
B
A
16
VQT1C63
Preparation
About the Built-in Memory/the Card
The built-in memory can be used as a
temporary storage device when the card
being used becomes full.
■ Built-in Memory [ ]
You can record or play back pictures
on the built-in memory when you
are not using a card. (The built-in
memory cannot be used when a card is
inserted.)
• The built-in memory capacity is about
27 MB.
• Picture size is fi xed to QVGA (320×240
pixels) when recording motion
pictures to the built-in memory. (P53)
■ Card [ ]
You can record or play back pictures on
a card.
■ About SD Memory Card (optional),
SDHC Memory Card (optional) and
MultiMediaCard (optional) (P5)
• The SD Memory Card, the SDHC
Memory Card and the MultiMediaCard
are small, lightweight, removable external
memory cards.
• The SDHC Memory Card is a memory
card standard decided by the SD
Association in 2006 for high capacity
memory cards more than 2 GB.
• The reading/writing speed of the SD
Memory Card and the SDHC Memory
Card is fast. The SD Memory Card and
the SDHC Memory Card are equipped
with a Write-Protect switch
A that can inhibit writing
and formatting. (When the
switch is slid to the [LOCK]
side, it is not possible
to write or delete data on the card and
format it. When the switch is unlocked,
these functions become available.)
• This unit supports SD Memory Cards
formatted in the FAT12 and FAT16
systems that comply with SD Memory
Card Specifi cations. It also supports
SDHC Memory Cards formatted in the
FAT32 system.
• This unit (SDHC compliant equipment)
supports both SD Memory Cards and
SDHC Memory Cards. You can use
SDHC Memory Cards on equipment
that supports them. You cannot use
SDHC Memory Cards on equipment
that supports SD Memory Cards only.
(When you use SDHC Memory Cards on
other equipment, make sure to read the
equipment’s operating instructions. If you
intend to have your pictures printed by
someone, fi rst fi nd out if they are able to
use SDHC Memory Cards.)
Please confi rm the latest information on
the following website.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only.)
• Refer to page 104 for the number
of recordable pictures and available
recording time on a card.
• Use the high speed SD Memory Card or
the high speed SDHC Memory Card for
motion picture recording. (P53)
• Save important data in such places as
your PC as well. Electromagnetic waves,
static electricity, unit malfunctions, card
damages and other factors may destroy
or erase data.
• If the card was formatted on a PC or
other equipment, format it again on the
camera. (P83)
• Keep the Memory Card out of reach of
children to prevent swallowing.
A
17
VQT1C63
Preparation
Setting Date/Time (Clock Set)
Set the mode dial to [ ].
■ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on,
the following screen appears.
A: [MENU/SET] button
B: Cursor buttons
C: Mode dial
1 Press [MENU/SET].
2 Press e/r/w/q to select the date.
D: Time at the home area
E: Time at the travel destination (P57)
• w/q : Select the desired item.
• e/r : Set date and time.
• A : To cancel without setting the
clock.
3 Press [MENU/SET].
• When you fi nish setting the clock, switch
the camera off, then switch it on in
recording mode to check that the clock is
set correctly.
Changing the clock setting
1 Press [MENU/SET].
2 Press e/r to select [CLOCK SET]
(P66).
3 Press q and perform the above steps 2
and 3 for setting.
4 Press [MENU/SET] to close the menu.
• You can set the clock from the setup
menu (P21).
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately 3
months even if the batteries are removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• Set the date so that the correct date is
printed when you order prints or use the
date stamp (P75).
A
B
C
PLEASE SET THE CLOCK
3
CLOCK SET
MENU
：..
:..
D
E
:
:
3
CLOCK SET
SELECT
EXIT
0
SET
CANCEL
M/D/Y
00 JAN 1 2007
18
VQT1C63
Preparation
SCN
SCN
A
SCN
Changing the mode
About the Mode Dial
When the power is on and you turn the mode dial, you can switch between shooting and
playback modes, and also select modes suited to the subject such as the macro mode
and scene modes.
Basic
Normal picture mode (P25)
Use this mode for normal recording.
Adjust part A to the desired mode.
The mode dial can be rotated 360°.
Rotate it slowly and surely to adjust to
each mode. (Do not adjust it to parts
where there is no mode.)
This screen appears when you turn the mode dial to show which mode is selected (P23).
The current mode appears on the LCD when you turn the camera on.
Simple mode
(P28)
This mode is recommended for beginners.
Playback mode (P34)
This mode allows you to play back recorded
pictures.
Advanced
NORMAL PICTURE
Print mode (P87)
This mode allows you to print pictures from
a PictBridge-compliant printer connected
directly to the camera.
Motion picture mode (P53)
This mode allows you to record motion
pictures.
Intelligent ISO mode (P45)
This feature detects the subject’s
movement and brightness, choosing the
optimal ISO sensitivity and shutter speed
for shooting.
Scene mode (P47)
This mode allows you to take pictures
depending on the recording scenes.
Macro mode (P46)
This mode allows you to take a close-up
picture of a subject.
19
VQT1C63
Preparation
■ The menu icons
Recording menu (P59)
Displayed when the mode dial is set to
[ ], [ ], [ ], [ ], or [ ].
Q Play menu (P71)
Displayed when the mode dial is set to
[].
Y Scene mode menu (P47)
Displayed when the mode dial is set to
[].
Setup menu (P21)
Displayed when the mode dial is set to
[ ], [ ], [ ], [ ], [ ], or [ ].
■ Changing the menu settings
• The following example shows how to set
[AF MODE] when normal picture mode
[ ] is selected.
1 Press e/r to select the menu
item.
• Press r at A to switch to the
next menu screen.
Using the Menus
■ To show the menus
Press [MENU/SET].
MENU
1
/
3
4:3
REC
SELECT EXIT
W.BALANCE
SENSITIVITY
ASPECT RATIO
PICT.SIZE
QUALITY
AWB
AUTO
Menu Icons
• The menu icons and
items that appear
depend on the position
of the mode dial.
Current Page
• For example: The fi rst page
of a 3-page menu.
You can move to the next/
previous page by turning
the zoom lever.
Menu items and settings
2
/
3
MENU
REC
SELECT EXIT
AF MODE
STABILIZER
BURST
AF ASSIST LAMP
D.ZOOM
MODE1
OFF
ON
OFF
MENU
1
/
3
4:3
AWB
REC
SELECT EXIT
W.BALANCE
SENSITIVITY
ASPECT RATIO
PICT.SIZE
QUALITY
AUTO
A
20
VQT1C63
Preparation
2 Press q.
3 Press e/r to select the setting.
4 Press [MENU/SET] to confi rm the
setting.
■ To exit the menus
Press [MENU/SET].
• You can also exit the menus when the
mode dial is set to [ ], [ ], [ ], [ ],
or [ ] by pressing the shutter button
halfway.
■ Switching to the setup menu
1 Press w in the menu screen.
2 Press r to select the setup menu
icon
[].
3 Press q.
• Continue to select items and change
settings.
AWB
MENU
1
/
3
4:3
REC
SELECT EXIT
W.BALANCE
SENSITIVITY
ASPECT RATIO
PICT.SIZE
QUALITY
AUTO
MENU
+
-
0
1
/
3
SETUP
SELECT EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
OFF
AUTO
AUTO
2
/
3
MENU
W
W
H
REC
SELECT SET
AF MODE
STABILIZER
BURST
AF ASSIST LAMP
D.ZOOM
ON
OFF
AUTO
AUTO
2
/
3
MENU
W
W
H
REC
SELECT SET
AF MODE
STABILIZER
BURST
AF ASSIST LAMP
D.ZOOM
ON
OFF
MENU
SET
2
/
3
MENU
REC
SELECT EXIT
AF MODE
STABILIZER
BURST
AF ASSIST LAMP
D.ZOOM
MODE1
OFF
ON
OFF
MENU
+
-
0
1
/
3
SETUP
SELECT EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
OFF
21
VQT1C63
Preparation
About the Setup Menu
• Change the settings if necessary.
• Select [RESET] to return the settings to the initial settings at the time of purchase (P23).
Press [ ] to display menu, enter the setup menu [ ] and select the item. (P20)
The setting marked “q” means it is the initial setting.
[BATTERY TYPE], [CLOCK SET], [AUTO REVIEW], [POWER SAVE] and [ECONOMY]
are very important items. Check their settings before use.
Select the type of batteries you
have inserted.
BATTERY TYPE
Select the type of battery being used from
the following 2 types.
ALKALINE (LR6)/Ni-MH
q OXYRIDE (ZR6)
• If the type of battery being used and the
type of battery selected are not the same,
the battery indication will not be displayed
correctly.
Set the date and time.
CLOCK SET (P17)
Change date and time.
Show images you have taken.
AUTO REVIEW
Adjust how long the recorded picture
automatically appears on the screen.
OFF / q 1 SEC. / 3 SEC.
• Auto review is not available in motion
picture mode [
i].
• You cannot change the auto review
setting in simple mode [ ] or burst
mode. (The setting is not selectable.)
Have the camera turn off
automatically.
POWER SAVE
If you perform no operations, the camera
turns off automatically after the interval you
set to save the battery.
OFF / 1 MIN. / 2 MIN. /
q
5 MIN. / 10 MIN.
• Press the shutter button halfway or turn
the camera off and on to recover from the
power save mode.
• Power save mode is fi xed to [2MIN.] in
economy mode and [5MIN.] in simple
mode [ ].
• When using the AC adaptor (DMW-AC6;
optional)/connecting to a PC or a printer/
recording motion pictures/playing back
motion pictures/during Slide Show (P72),
the power save mode is not activated.
3
P
5
MENU
SET
22
VQT1C63
Preparation
Have the LCD turn off
automatically.
ECONOMY
Battery life is saved by reducing the
brightness of the LCD monitor and turning
it off automatically when the camera is not
being used in recording mode.
q OFF: Economy mode cannot be
activated.
LEVEL1:The LCD monitor turns off if
the camera is not operated
for about 15 seconds in
recording mode.
LEVEL2:The LCD monitor turns off if
the camera is not operated
for about 15 seconds in
recording mode or for about
5 seconds after taking a
picture.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• Power save mode is fi xed to [2 MIN.] in
economy mode.
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC6; optional).]
• Economy mode is not activated in the
following cases.
– In simple mode [ ]
– When using the AC adaptor (DMW-
AC6; optional)
– While a menu screen is displayed
– While the self-timer is set
– While recording motion pictures
WORLD TIME (P57)
Set date and time at your home area and
the travel destination.
: The local time at the travel
destination
q : The time at your home area
MONITOR
Adjust the brightness of the LCD monitor
in 7 steps.
TRAVEL DATE (P55)
Set the departure and return dates.
q OFF / SET
BEEP
Set to select the volume of operational
sound.
7 : No operational sound
q 8 : Soft operational sound
9 : Loud operational sound
NO.RESET
Set this when you want to start the fi le
number of the picture from 0001 on the
next recording.
• The folder number is updated, and the
fi le number starts from 0001 (P85).
• The folder number can be assigned from
100 to 999. When the folder number
reaches 999, it cannot be reset. We
recommend formatting the card after
saving the data on a PC or elsewhere.
• To reset the folder number to 100, you
must fi rst reformat the built-in memory or
the card (P83). After this perform [NO.
RESET] to reset the fi le number, after
which a screen appears asking whether
you want to reset the folder number.
Select [YES].
6
x
2
Press [ ] to display menu, enter the setup menu [ ] and select the item. (P20)
MENU
SET
23
VQT1C63
Preparation
RESET
The settings on the recording or the
[SETUP] menu are reset to the initial
settings.
• The birthday setting for [BABY1]/[BABY2]
or [PET] (P50) in scene mode and
the number of days that have passed
since the departure date for [TRAVEL
DATE] (P55) and the [WORLD TIME]
setting (P57) are also reset when the
[SETUP] menu settings are reset. Also,
[FAVORITE] (P73) is fi xed to [OFF] and
[ROTATE DISP.] (P74) is fi xed to [ON].
• The battery type setting, the folder
number and the clock setting are not
changed.
VIDEO OUT
(Playback mode only)
Set to [NTSC] or [PAL] according to the TV
system in your country (P91).
q NTSC: Video output is set to NTSC
system.
PAL: Video output is set to PAL
system.
TV ASPECT
(Playback mode only)
Set to [
j] or [h] according to your
television.
j: Select if your television has a
16:9 aspect ratio.
q
h: Select if your television has a
4:3 aspect ratio.
DIAL DISPLAY (P18)
Choose whether to show the mode dial
display when you turn the mode dial.
OFF / q ON
LANGUAGE
Set to the language on the menu screen
from the following languages.
q [ENGLISH]: English
[DEUTSCH]: German
[FRANÇAIS]: French
[ESPAÑOL]: Spanish
[ITALIANO]: Italian
[ʑᄽ]: Chinese (Traditional)*
[日本語]: Japanese
* Available in Canada only
• When you set to other language by
mistake, select [
{] from the menu icons
to set the desired language.
1
X
{
Press [ ] to display menu, enter the setup menu [ ] and select the item. (P20)
MENU
SET
24
VQT1C63
Preparation
■ Display in normal picture mode [ ].
(at the time of purchase)
1 Recording mode
2 Flash mode (P40)
• The fl ash icon turns red when
activating the fl ash and pressing the
shutter button halfway.
3 AF area
• The AF area displayed is bigger than
usual when taking pictures in dark
place.
4 Focus (P25)
5 Picture size (P62)
6 Quality (P62)
6 : Jitter alert indication (P27)
7 Battery indication
• The battery indication turns red and
blinks. (The status indicator blinks
when the LCD monitor is turned off.)
Replace with new batteries or fully
charged Ni-MH batteries.
• It does not appear when using the AC
adaptor (DMW-AC6; optional).
8 Remaining number of recordable
pictures
9 Recording indication
10 Built-in memory / Card
( or lights red during accessing.)
• Do not do the following when the
access indication lights.
– Turn the camera off.
– Remove the batteries or the card
(if used).
– Shake or impact the camera.
– Disconnect the AC adaptor
(DMW-AC6; optional). (when
using the AC adaptor)
• Observe the above caution also when
pictures are being read or deleted or
the built-in memory (or the card) is
being formatted (P83).
• The access time for the built-in
memory may be longer than the
access time for a card. (Max. about 7
sec.)
11 Shutter speed (P25)
12 Aperture value (P25)
• If the exposure is not adequate, the
aperture value and the shutter speed
turn red. (They do not turn red when
the fl ash is activated.)
13 Optical image stabilizer (P64)
• For details about other displays, see
page 92.
■ Changing the display
Press [DISPLAY] to change the display.
Choose whether to display information
such as the number of pixels and
possible number of images for recording
while you are shooting. For details, see
page 37.
LCD monitor and changes to the display
1
19
7M
12
13
8
10
9
5 6 73 4
1112
25
VQT1C63
Basic
Taking Pictures
Select normal picture mode [ ].
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
A Shutter button
B Turn the camera on.
C The status indicator lights for 1 second.
1 Hold the camera gently with both
hands, keep your arms still at
your side and stand with your
feet shoulder-width apart.
D: When holding the camera vertically
E: Flash
F: AF assist lamp
2 Aim the AF area H to the point
you want to focus on.
3 Press the shutter button halfway
to focus.
G: The focus indication lights green.
H: AF area: white green
I: Aperture value
J: Shutter speed
• The camera beeps twice when the
subject is focused.
• The camera can focus between 50 cm
(1.64 feet) and Z.
• The following indicate that the subject is
out of focus.
– Focus indication blinks (green).
– AF area turns white to red or no AF
area.
– Beeps 4 times.
• The focus indicator may light even if the
subject is not properly focused if the
subject is out of range.
4 Press the shutter button fully to
take the picture.
■ Using the fl ash
If the fl ash is set to AUTO [r] or
AUTO/Red-eye reduction [
s], the fl ash
will work when you press the shutter button
if the camera determines that the area to
be shot is too dark.
• You can change the fl ash settings (P40).
• When you press the shutter button, the
screen may become bright or dark for
a moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
• Be careful not to move the camera when
you press the shutter button.
• Do not cover the photo fl ash or the AF
assist lamp with your fi nger or other
objects.
• Do not touch the lens.
SC
N
B
A
C
HG
I
J
D
E
F
26
VQT1C63
Basic
Photography basics – exposure, focus, and color
A little knowledge about exposure, focus and color will come in handy when you are
having trouble with a shot.
Are images dark?
Exposure
problems
Go to page 44
In normal picture mode [ ], Auto Exposure (AE) normally
sets the correct exposure for you, but images may be dark if
there is backlight.
Use exposure compensation in these situations for
brighter images.
Focus
problems
Go to page 27, 46
In normal picture mode [ ], Auto Focus (AF) normally sets
the correct focus for you, but images may be unfocused in the
following situations. The camera can focus between 50 cm
(1.64 feet) and
Z.
– When shooting something that is far away and something
that is close by at the same time.
– When shooting through a dirty window.
– When there are sparkling or shiny objects around the
subject.
– When shooting in a dark place.
– When shooting a subject that is moving fast.
– When shooting a scene with minimal contrast.
– When shooting something very bright.
– When taking a close-up picture of the subject
– When there is jitter.
Use AF/AE lock or macro mode [w] in these situations.
Color problems
Go to page 60
How the subject appears depends on the kind of lighting, so
colors in different lights will be different. This unit adjusts the
color automatically to give a more natural result. (Auto white
balance)
You can also adjust the white balance to suit different
situations to reproduce natural colors.
27
VQT1C63
Basic
■ When you want to take a subject
outside the AF area (AF/AE Lock)
When recording a picture of people with a
composition like the following picture, you
will not be able to focus the camera on the
subject because the people are outside the
AF area.
In this case,
1 Aim the AF area at the subject.
2 Press the shutter button halfway to fi x
the focus and the exposure.
• The focus indication lights when the
subject is focused.
3 Press and hold the shutter button
halfway while moving the camera as
you compose the picture.
4 Press the shutter button fully.
• You can repeatedly retry AF/AE lock
before pressing the shutter button fully.
■ Direction detection function
• If you take pictures by holding the
camera vertically, the information of the
rotation on the pictures is automatically
added and recorded to the pictures.
When [ROTATE DISP.] (P74) is set to
[ON], you can rotate and display pictures
on the screen or the TV according to the
information of the rotation on the pictures.
• This function may not work properly on
pictures recorded by aiming the camera
up or down.
• In motion picture mode [i], you cannot
use the direction detection function.
■ Preventing jitter (camera shake)
• Be careful of jittering when pressing the
shutter button.
• The jitter alert 1 appears when the
shutter speed is slow and the chances of
blurring are greater.
• When the jitter alert appears, take special
care with the shooting methods described
on P25, or use a tripod for best results.
By combining the use of a tripod with the
self-timer (P43), you can avoid blurring
caused when you press the shutter
button.
• Shutter speed will be slower particularly
in the following cases. Keep the camera
still from the moment the shutter button is
pressed until the picture appears on the
screen. We recommend using a tripod.
– [NIGHT PORTRAIT], [NIGHT
SCENERY], [PARTY], [CANDLE
LIGHT], [STARRY SKY],
[FIREWORKS] in scene mode (P47)
1
19
7M
1
19
19
28
VQT1C63
Basic
Taking Pictures in Simple Mode
This mode allows beginners to take
pictures easily. Only the basic functions
appear in the menu to make operations
simple.
■ Basic menu settings
1 Press [MENU/SET].
2 Press e/r to select the desired
menu item and then press q.
3 Press e/r to select the desired
setting and then press
[MENU/SET].
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
■ Settings in Simple mode
[PICT.MODE]
ENLARGE Suitable for enlarging the
pictures to be printed to
8˝ × 10˝ size, letter size
etc.
4 ˝ × 6˝/
10 × 15 cm
Suitable for regular size
printing.
E-MAIL Suitable for attaching
pictures to e-mails
or adding pictures to
websites.
[BATTERY TYPE]
Change the battery type being used.
(P21)
[BEEP]
OFF No operation sound
LOW Soft operation sound
HIGH Loud operation sound
[CLOCK SET]
Change date and time. (P17)
• If [4˝ × 6˝/10 × 15 cm] or [E-MAIL] is set
in [PICT.MODE], the extended optical
zoom is activated (P30).
• The settings for [BATTERY TYPE],
[BEEP] and [CLOCK SET] in simple
mode are also applied to other recording
modes.
• The settings for [WORLD TIME]
(P22), [MONITOR] (P22), [TRAVEL
DATE] (P22), [NO.RESET] (P22) and
[LANGUAGE] (P23) in the [SETUP]
menu are applied to simple mode.
■ Other Settings in simple mode
In simple mode, other settings are fi xed as
follows. For more information about each
setting, refer to the page indicated.
• Focus range:
30 cm (0.98 feet) to Z (Tele)
5 cm (0.16 feet) to Z (Wide)
• [AUTO REVIEW] (P21):
[1SEC.]
• [POWER SAVE] (P21):
[5MIN.]
• [ECONOMY] (P22):
[OFF]
• Self-timer (P43):
10 seconds
• Optical Image Stabilizer (P64):
[MODE2]
• [W.BALANCE] (P60):
[AWB]
MENU
SIMPLE MODE
SELECT SET
PICT.MODE
BATTERY TYPE
BEEP
CLOCK SET
ENLARGE
4˝×6˝/10×15 cm
E-MAIL
29
VQT1C63
Basic
• [SENSITIVITY] (P61):
Settings will be the same as those
used when you have set ISO LIMIT
in Intelligent ISO mode [ ] (P45) to
[ISO800].
• [ASPECT RATIO]/[PICT.SIZE]/
[QUALITY] (P62):
– [ ENLARGE]:
h/DMC-LS75/DMC-LS70: (7M),
DMC-LS60: (6M)/Fine
– [ 4˝ × 6˝/10 × 15 cm]:
/ (2.5M EZ)/Standard
– [ E-MAIL]:
h/ (0.3M EZ)/Standard
• [AF MODE] (P63):
[
W] (1-area-focusing)
• [AF ASSIST LAMP] (P66)
[ON]
• You cannot use the following functions in
simple mode.
– High angle mode
– Exposure compensation
– [BURST]
– [D.ZOOM]
– [COL.MODE]
• You cannot change the following settings.
– [TRAVEL DATE]
– [WORLD TIME]
■ The Backlight Compensation
Backlight is a situation where light comes
from behind the subject. This can cause
the subject to appear dark, so brightening
the whole image compensates for this.
Press e.
• [
0] appears when you are using
backlight compensation. Press e to
cancel.
• When you use the backlight
compensation function, we recommend
using the fl ash. (When you use the fl ash,
the fl ash setting is fi xed to Forced ON
[ ].)
• When you use the fl ash with the backlight
compensation off, the fl ash setting is
fi xed to AUTO/Red-eye reduction [ ].
7M
2.5M
0.3M
19
19
BACKLIGHT
BACKLIGHT
6M
30
VQT1C63
Basic
Taking Pictures with the Zoom
Using the Optical Zoom /
the Extended Optical Zoom (EZ)
You can make people and subjects appear
closer with the 3 times optical zoom, and
landscapes can be recorded in wide angle.
(35 mm fi lm camera equivalent: 35 mm to
105 mm)
To zoom even more (up to 4.5 times with
DMC-LS75/DMC-LS70) with no reduction
in picture quality, choose any resolution for
each of the available aspect ratios except
the largest one.
■ To make subjects appear closer use
(Tele)
Rotate the zoom lever towards Tele.
■ To make subjects appear further
away use (Wide)
Rotate the zoom lever towards Wide.
■ How the extended optical zoom
works
The extended optical zoom works by
extracting the center of the picture and
expanding it for a higher telephoto
effect. So, for example, if you choose
[ ] (3M EZ) (3 million pixels), the 7M
(7 million) (DMC-LS75/DMC-LS70) or
6M (6 million) (DMC-LS60) CCD area
is cropped to the center 3M (3 million
pixels) area, allowing a picture with a
higher zoom effect.
■ Resolution and maximum zoom
Aspect
ratio
(P62)
Pixels
(P29, 62)
Maximum zoom (Tele)
DMC-LS75/
DMC-LS70
DMC-LS60
h
DMC-LS75/
DMC-LS70
/ (7M)
3 × —
DMC-LS60 only
/ (6M)
—3 ×
DMC-LS75/
DMC-LS70
(5M EZ)
3.6 × —
(3M EZ),
(2M EZ),
(1M EZ),
/
(0.3M EZ)
4.5 × 4.1 ×
DMC-LS75/
DMC-LS70
(6M)
3 × —
DMC-LS60 only
(5M)
—3 ×
/
(2.5M EZ)
4.5 × 4.1 ×
j
DMC-LS75/
DMC-LS70
(5.5M)
3 × —
DMC-LS60 only
(4.5M)
—3 ×
(2M EZ) 4.5 × 4.1 ×
• The optical zoom is set to Wide (1 ×)
when the camera is turned on.
• If you use the zoom function after
focusing on the subject, focus on the
subject again.
• The lens barrel (P9) extends or retracts
according to the zoom position. Take
care not to interrupt the motion of the
lens barrel while the zoom lever is
rotated.
• In motion picture mode [i], the zoom
magnifi cation is fi xed to the value set at
the start of recording.
3M
7M
5M
3M
2M
1M
0.3M
6M
2.5M
2M
5.5M
6M
5M
4.5M
31
VQT1C63
Basic
• “EZ” is an abbreviation of [Extended
optical Zoom].
• If you set a picture size that activates
the extended optical zoom, the extended
optical zoom icon [ ] is displayed
on the screen when you use the zoom
function.
• The zoom will stop moving for an instant
near [W] (1 ×) when the extended optical
zoom is used. This is not a malfunction.
• The indicated zoom magnifi cation is an
approximation.
• In motion picture mode [i] and [HIGH
SENS.] in scene mode, the extended
optical zoom does not work.
Using the easy zoom button
Press the [E.ZOOM] button to quickly
zoom. Actual zoom factors depend on the
pixel recording setting.
A [E.ZOOM] button
■ When the picture size is set to the
highest resolution for each aspect
ratio
Resolution is temporarily reduced and
you can use the extended optical zoom.
1 Press [E.ZOOM] once.
2 Press [E.ZOOM] twice.
3 Press [E.ZOOM] three times.
A Optical zoom
B Extended optical zoom
C Maximum extended optical zoom
magnifi cation
• The resolution becomes smaller as
shown below when the extended optical
zoom is used. The color of the zoom
bar and the resolution displayed on the
screen change at this time.
Aspect ratio Picture size
h
j
•
If you press [E.ZOOM] three times, the zoom
position returns to the Wide and the resolution
returns to the original. The resolution also
returns to normal when you return the zoom
lever to the optical zoom position.
■
When the picture size is set except
highest resolution for each aspect ratio
4 Press [E.ZOOM] once.
5 Press [E.ZOOM] twice.
D Extended optical zoom
E Maximum extended optical zoom
magnifi cation
• Press [E.ZOOM] until the zoom starts
working.
•
The easy zoom is also activated if the zoom
position is anything other than Wide.
• You can further extend the zoom to the
Digital zoom range when [D.ZOOM]
(P32) is set to [ON].
• In [ ENLARGE] in simple mode [ ],
[HIGH SENS.] (P51) in scene mode and
motion picture mode [
i], the zoom is
limited to the 3 × optical zoom.
• The indicated zoom magnifi cation is an
approximation.
1
W
T
1
1
3
A
B
W
T
EZ
2
1
C
C
W
T
EZ
3
2M
2.5M
3M
1
W
T
EZ
4
1
W
T
EZ
5
DE
E
32
VQT1C63
Basic
Using the Digital Zoom
Further extending the zoom
A maximum of 12 × zoom can be achieved
with the 3 × optical zoom and the 4 ×
digital zoom when [D.ZOOM] is set to [ON]
in the [REC] menu. However, if a picture
size that can use extended optical zoom is
selected, a maximum of 18 × zoom can be
achieved with the 4.5 × extended optical
zoom and the 4 × digital zoom (DMC-
LS75/DMC-LS70).
■ Menu operation
1 Press [MENU/SET].
• When a scene mode is selected, select
the [REC] menu icon [ ] and then
press q.
2 Press e/r to select [D.ZOOM]
and then press q.
3 Press r to select [ON] and then
press [MENU/SET].
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
■ Entering the digital zoom range
When you rotate the zoom lever to the
extreme Tele position, the on-screen zoom
indication may momentarily pause.
You can enter the digital zoom range to
continuously rotate the zoom lever to Tele
or to release the zoom lever once and then
rotate it to Tele again.
For example: When using the digital
zoom and the extended optical zoom
[ ] (3M EZ) at the same time with
DMC-LS75/DMC-LS70.
1 Optical zoom
2 Digital zoom
3 Extended optical zoom
• The AF area is displayed with a size
wider than usual and set only to a point
on the center of the screen in the digital
zoom range. (P64) Also, the stabilizer
function may not be effective.
• When using the digital zoom, the picture
quality becomes deteriorated.
• When using the digital zoom, use a tripod
and the self-timer (P43) for best results.
• The indicated zoom magnifi cation is an
approximation.
• The digital zoom does not operate in the
following cases.
– In simple mode [ ]
– In intelligent ISO mode [ ]
– In [SPORTS], [BABY1]/[BABY2], [PET]
and [HIGH SENS.] in scene mode
(P47)
O
21
23
4.5
18
W
T
1
1
3 12
W
T
W
T
EZ
• [OFF]:
• [ON]:
MENU
SET
MENU
2
/
3
REC
SELECT SET
AF MODE
STABILIZER
BURST
AF ASSIST LAMP
D.ZOOM
MODE1
OFF
OFF
ON
3M
33
VQT1C63
Basic
Checking the Recorded Picture (Review)
You can check the recorded pictures while
still in [REC] mode.
1 Press r [REV].
• The last recorded picture appears for
about 10 seconds.
• Review is canceled when the shutter
button is pressed halfway or the r [REV]
is pressed again.
2 Press w/q to choose a picture.
w : Previous picture
q : Next picture
■ Enlarging pictures
1 Rotate the zoom lever towards
[3] [T].
• Rotate the zoom lever to [3] [T] for
a 4× magnifi cation and then rotate it
even more for a 8× magnifi cation. When
you rotate the zoom lever towards
[ ] [W] after enlarging the picture, the
magnifi cation becomes lower.
2 Press e/r/w/q to move the
position.
• When you change the magnifi cation or
the position to be displayed, the zoom
position indication A appears for about 1
second to check where is enlarged.
■ Recorded pictures can be deleted
during the review (Quick Deletion)
During review you can delete one, multiple,
or all pictures. For details about how to
delete images, see page 35.
• When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated) (P74).
REVIEW1X
EXIT DELETE
4X
REVIEW1X
EXIT DELETE4X
X
8X
1
A
REVIEW4X
DELETE
34
VQT1C63
Basic
Playing Back Pictures
The picture data on the built-in memory
appears when a card is not inserted. The
picture data on the card appears when a
card is inserted. (P16)
Press w/q to select the picture.
w : Play back the previous picture.
q : Play back the next picture.
■ Fast forwarding/Fast rewinding
Press and hold w/q during playback.
q : Fast forward
w : Fast rewind
• The fi le number A and the picture
number B only change one by one.
Release w/q when the number of the
desired picture appears to play back the
picture.
• If you press and hold w/q, you can
forward/rewind faster.
• In review playback in the recording mode
or multi playback (P67), the picture can
only be forwarded or rewound one by
one.
• This camera is based on the DCF
standards (Design rule for Camera
File system) which was established by
the Japan Electronics and Information
Technology Industries Association
(JEITA).
• The LCD monitor may not be able
to display the details of the recorded
pictures. You can use the playback zoom
(P69) to check the details of the pictures.
• If you play back pictures that have been
recorded with other equipment, the
picture quality may deteriorate. (The
pictures are displayed as [THUMBNAIL
IS DISPLAYED] on the screen.)
• When changing the folder name or fi le
name on a PC, the pictures will not be
played back.
• When playing back a fi le out of standard,
the folder/fi le number is indicated by [—]
and the screen may turn black.
• You cannot play back the audio of still
pictures with audio recorded on other
equipment.
100-0001
1/19
7M
:..
10 00 DEC 1 2007
100-0001
1/19
7M
A
B
:..
10 00 DEC 1 2007
35
VQT1C63
Basic
Deleting Pictures
The picture data on the built-in memory is
deleted when a card is not inserted. The
picture data on the card is deleted when a
card is inserted. (P16)
• Once deleted, pictures cannot be
recovered. Please double-check before
deleting pictures.
■ To delete a single picture
1 Select the picture with w/q.
2 Press [A].
3 Press e to select [YES] and then
press [MENU/SET].
• While deleting the picture, [A] appears
on the screen.
■ To delete [MULTI DELETE]/[ALL
DELETE]
1 Press [A] twice.
2 Press e/r to select [MULTI
DELETE] or [ALL DELETE] and
then press [MENU/SET].
• If you select [MULTI DELETE], perform
steps 3 onwards.
• If you select [ALL DELETE], perform
steps 5 onwards.
• When [FAVORITE] (P73) is set to [ON],
[ALL DELETE EXCEPT ★] appears. If
you select [ALL DELETE EXCEPT ★],
perform steps 5 onwards. (However, if
none of the pictures have [★] displayed,
you cannot select [ALL DELETE
EXCEPT ★] even if [FAVORITE] is set to
[ON].)
MENU
SET
MENU
SELECT SET CANCEL
MULTI/ALL DELETE
MULTI DELETE
ALL DELETE
MENU
SET
SELECT
MULTI/ALL
DELETE SINGLE
YES
NO
DELETE THIS PICTURE ?
SET
MENU
36
VQT1C63
Basic
3 Press w/q to select the picture
and then press r to set.
(Only when selecting [MULTI DELETE])
• Repeat the above procedure.
• The selected pictures appear with [A].
When r is pressed again, the setting is
canceled.
• The icon [c] blinks red if the selected
picture cannot be deleted. Cancel the
protect setting. (P79)
4 Press [A].
5 Press e to select [YES] and then
press [MENU/SET] to set.
(Screen when selecting [MULTI DELETE])
• When you delete all pictures, only
pictures in either of the built-in memory
or the card can be deleted. (You cannot
delete pictures in both the built-in
memory and the card at the same time.)
• [DELETE ALL PICTURES ON THE
BUILT-IN MEMORY ?] or [DELETE ALL
PICTURES ON THE MEMORY CARD ?]
is displayed when using [ALL DELETE],
and [DELETE ALL EXCEPT ★?] is
displayed when using [ALL DELETE
EXCEPT ★].
• If you press [MENU/SET] while deleting
pictures using [ALL DELETE] or [ALL
DELETE EXCEPT ★], the deleting will
stop halfway.
• Do not turn off the camera while deleting.
• When deleting pictures, use batteries
with suffi cient battery power (P24) or use
the AC adaptor (DMW-AC6; optional).
• It is possible to delete up to 50 pictures at
one time using [MULTI DELETE].
• The more pictures there are to delete, the
more time it takes.
• In the following cases, pictures are not
deleted even if [ALL DELETE] or [ALL
DELETE EXCEPT
★] is selected.
– When the Write-protect switch of the
SD Memory Card or SDHC Memory
Card is set to the [LOCK] side (P16)
– When fi les do not conform to the DCF
(P34)
– When pictures are protected [c]
(P79)
MENU
7
10
98
11
SELECT
EXIT
MULTI DELETE
MARK/UNMARK
DELETE
MENU
SET
MENU
SELECT SET
MULTI DELETE
YES
NO
DELETE THE PICTURES
YOU MARKED ?
37
VQT1C63
Advanced-Shooting
About the LCD Monitor
Changing the information
displayed
A LCD monitor (LCD)
Press the [DISPLAY] button to switch to
the screen to be used.
• When the menu screen appears, the
[DISPLAY] button is not activated. During
playback zoom (P69), while playing back
motion pictures (P70) and during a slide
show (P72), you can only select “Normal
display” or “Non-display”.
In recording mode
B Normal display
C Display with histogram
D Guide line display
E Non-display
*1 Histogram
In playback mode
F Normal display
G Display with recording information and
histogram
H Non-display
*2 The number of days that have passed
since the travel date is displayed when a
picture was taken with [TRAVEL DATE]
(P55) setting.
*3 Displayed when you set birthday setting
for [BABY1]/[BABY2] or [PET] in scene
mode, and [WITH AGE] is selected
(P50) at taking pictures.
In simple mode [ ]
I Normal display
J Non-display
• In [NIGHT PORTRAIT], [NIGHT
SCENERY], [STARRY SKY] and
[FIREWORKS] in scene mode (P47), the
guide lines are grey.
A
1 1
19
19
7M
7M
*
1
C
D
E
B
3
J
I
BACKLIGHT
200
ISO
AWB
F2.8 1/25
100-0001
1/19
1
00
-
0001
--
1/19
7M
7M
..
:
..
:
G
HF
*
3
*
2
10 00 JAN 1 2007
10 00 JAN 1 2007
1ST DAY
1 month 10 days
DISPLAY
38
VQT1C63
Advanced-Shooting
■ About guide line display
When you align the subject on the guide
lines or the cross point of these lines,
you can take pictures with well-designed
composition by viewing the size, the slope
and the balance of the subject.
■ Histogram
• A histogram is a graph that displays
brightness along the horizontal axis
(black to white) and the number of pixels
at each brightness level on the vertical
axis.
• It allows the camera user to easily check
the way a picture is being exposed.
• When the values in the histogram are
distributed evenly A, the exposure is
adequate and the brightness is well-
balanced.
• When the values are concentrated to
the left B, the picture is under exposed.
Pictures that are mostly black, such
as night scenery, forms this type of
histogram.
• When the values are concentrated to
the right C, the picture is over exposed.
Pictures that are mostly white, form this
type of histogram.
Example of histogram
A Properly Exposed
B Under Exposed
C Over Exposed
* Histogram
• The image you are shooting and
the histogram may not match when
shooting in a dark place or with the
fl ash. The histogram will be orange to
indicate this.
• The histogram in the recording mode is
an approximation.
• The histogram in recording and playback
may not match each other.
• The histogram in this camera does not
match the one displayed in image editing
software used with a PC, etc.
• No histogram appears in the following
cases.
– In simple mode [ ].
– In motion picture mode [i].
– While multi playback is in progress.
– While calendar playback is in progress.
– While playback zoom is in use.
F2.8 1/100
200
ISO
AWB
F2.8 1/200
200
ISO
AWB
F2.8 1/50
200
ISO
AWB
*
*
*
100-0001
1/19
100-0001
1/19
100-0001
1/19
7M
7M
7M
A
B
C
..
:
..
:
..
:
10 00 JAN 1 2007
10 00 JAN 1 2007
10 00 JAN 1 2007
39
VQT1C63
Advanced-Shooting
Recording a picture with the
camera held high above your
head (High angle mode)
The LCD monitor becomes easier to see
when the camera is held in the following
position. This is useful when you cannot
get close to the subject because there is a
person in the way.
Press [HIGH ANGLE] A for 1
second to display the High angle
mode icon [ ] B.
• High angle mode is activated. The
LCD monitor becomes brighter and
easier to see when the camera is held
away from you. (However it becomes
more diffi cult to see when looked at
straight on.)
■ Canceling High angle mode
Press and hold [HIGH ANGLE] again for 1
second or turn the camera off.
• High Angle mode is also canceled if
power save mode is activated.
• Pictures are displayed on the LCD
monitor with increased brightness in High
angle mode. Therefore, some subjects
may look different on the LCD monitor.
However, this does not affect the
recorded pictures.
• If the LCD monitor screen is hard to see
because of light from the sun etc. shining
on it, block the light with your hands.
• High angle mode is not activated in the
following cases:
– In simple mode [ ]
– In playback mode
– In print mode [ ]
– While the menu screen is displayed
– During Review
A
HIGH
ANGLE
19
19
7M
1
7M
1
HIGH
ANGLE
B
FOR 1 SEC.
FOR 1 SEC.
ON:PRESS
OFF:PRESS
40
VQT1C63
Advanced-Shooting
Taking Pictures using the Built-in Flash
A: Photo fl ash
• Do not cover the photo fl ash with your
fi ngers or any other items.
■ Switching to the appropriate fl ash
setting
Set the fl ash setting of the built-in fl ash
according to the scene to be recorded.
1 Press q [<].
2 Press e/r or q [<] to switch the
fl ash setting.
• For the fl ash setting contents, refer to
“Flash setting”. For the selectable fl ash
setting, refer to “Available fl ash settings
by recording mode” (P41).
3 Press [MENU/SET].
• You can also press the shutter button
halfway to fi nish.
• When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
■ Flash setting
r : AUTO
The fl ash is automatically activated
according to the recording condition.
s : AUTO/Red-eye reduction*
1
The fl ash is automatically activated
according to the recording condition. It
reduces the red-eye phenomenon (eyes
of the subject appear red in photo fl ash)
by triggering the fl ash before actually
recording the picture.
After that, the fl ash is activated for actual
recording again.
• Use this when you take pictures of
people in low lighting conditions.
t : Forced ON
The fl ash is activated every time
regardless of the recording condition.
• Use this when your subject is back-lit
or under fl uorescent light.
q : Forced ON/Red-eye reduction*
1
• In [PARTY] or [CANDLE LIGHT] in
scene mode (P47), the fl ash mode is
set to Forced ON/Red-eye reduction.
u : Slow sync./Red-eye reduction*
1
When you take a picture with a dark
background landscape, this feature
makes the shutter speed slow when
the fl ash is activated, so that the dark
background landscape will become bright.
Simultaneously it reduces the red-eye
phenomenon.
• You can use this setting only in
[NIGHT PORTRAIT], [PARTY] or
[CANDLE LIGHT] in scene mode (P47).
v : Forced OFF
The fl ash is not activated in any recording
condition.
• Use this when taking pictures in
places where the use of the fl ash is
not permitted.
A
MENU
FLASH
SELECT SET
AUTO
AUTO/RED-EYE
FORCED FLASH ON
FORCED OFF
or
41
VQT1C63
Advanced-Shooting
*
1
The fl ash is activated twice. The
subject should not move until the
second fl ash is activated.
■ Available fl ash settings by recording
mode
The available fl ash settings depend on the
recording mode.
(○ : Available, — : Not available, ◎ : Initial
setting)
*
2
It becomes Forced ON [ ], when the
backlight compensation function is
activated.
• The fl ash setting may change when you
change the recording mode. Change the
fl ash setting again if necessary.
•
Flash settings are retained even if you
switch the camera off. However, scene
mode fl ash settings return to the factory
settings when you change the scene mode.
■ The available fl ash range to take
pictures
ISO
sensitivity
(P61)
Available fl ash range
AUTO 30 cm (0.98 feet) to 4.7 m
(15.42 feet) (Wide)
30 cm (0.98 feet) to 2.6 m
(8.53 feet) (Tele)
ISO100 30 cm (0.98 feet) to 1.8 m
(5.91 feet) (Wide)
30 cm (0.98 feet) to 1.0 m
(3.28 feet) (Tele)
ISO200 40 cm (1.31 feet) to 2.6 m
(8.53 feet) (Wide)
30 cm (0.98 feet) to 1.4 m
(4.59 feet) (Tele)
ISO400 60 cm (1.97 feet) to 3.7 m
(12.14 feet) (Wide)
40 cm (1.31 feet) to 2.1 m
(6.89 feet) (Tele)
ISO800 80 cm (2.62 feet) to 5.3 m
(17.39 feet) (Wide)
60 cm (1.97 feet) to 2.9 m
(9.51 feet) (Tele)
ISO1250 100 cm (3.28 feet) to 5.3 m
(17.39 feet) (Wide)
80 cm (2.62 feet) to 2.9 m
(9.51 feet) (Tele)
• Refer to P107 for the focus range.
• When you use the fl ash when you have
set ISO sensitivity to [AUTO] or set
ISO LIMIT in Intelligent ISO mode [ ]
to anything other than [ISO400], ISO
sensitivity automatically becomes a
maximum of [ISO640] ([ISO400] in the
[BABY1]/[BABY2] or [PET] scene modes
(P47)).
• The edges of the picture may appear
dark if you shoot a very close subject with
the fl ash while the zoom lever is close to
the W side. Zoom in slightly if this occurs.
**
22
42
VQT1C63
Advanced-Shooting
■ The available fl ash range to take
pictures in intelligent ISO mode
ISO LIMIT
(P45)
Available fl ash range
ISO400 30 cm (0.98 feet) to 3.7 m
(12.14 feet) (Wide)
30 cm (0.98 feet) to 2.1 m
(6.89 feet) (Tele)
ISO800 30 cm (0.98 feet) to 5.3 m
(17.39 feet) (Wide)
30 cm (0.98 feet) to 2.9 m
(9.51 feet) (Tele)
ISO1250
•
When you have set ISO LIMIT in Intelligent
ISO mode [ ] (P45) to anything other than
[ISO400] and use the fl ash, ISO sensitivity
automatically rises to a maximum of [ISO640].
■ Shutter speed for each fl ash mode
Flash mode
Shutter speed
(sec.)
r
: AUTO 1/30 to 1/2000
s : AUTO/
Red-eye
reduction
1/30 to 1/2000
t : Forced ON
q : Forced
ON/Red-eye
reduction
1/30 to 1/2000
u : Slow sync./
Red-eye
reduction
1/4 or
1 to 1/2000*
1
1/4 to 1/2000*
2
v
: Forced OFF 1/4 to 1/2000
1/8 or 1 to 1/2000*
3
1/4 or 1 to 1/2000*
4
*1 [NIGHT PORTRAIT] (P48) or [CANDLE
LIGHT] (P49) in scene mode
*2 [PARTY] (P49) in scene mode
*3 In simple mode [ ]
*4 Intelligent ISO mode [ ] (P45)/
[SPORTS] (P48), [NIGHT PORTRAIT]
(P48), [CANDLE LIGHT] (P49), [BABY]
(P50), and [PET] (P50) in scene mode
• The shutter speed reaches the maximum
of 1 second for *1, *3 and *4 when:
– Optical Image Stabilizer is [OFF]
–
In simple mode [ ] or when the Optical
Image Stabilizer is set to [MODE1] or
[MODE2] and the camera determines that
there is minimum possibility of blurring.
• The shutter speed will be different from
that shown in the above table in the
following scene modes.
– [NIGHT SCENERY] (P49):
8 seconds to 1/2000th of a second
– [STARRY SKY] (P51):
15 seconds, 30 seconds, 60 seconds
– [FIREWORKS] (P52):
1/4th of a second, 2 seconds
• Do not look directly at the fl ash at
close range when it is activated.
• Do not bring the fl ash too close to
objects or close the fl ash while it
is activated. The objects may be
discolored by its heat or lighting.
• While the fl ash is charged, the LCD
monitor turns off and you cannot take
pictures. The status indicator lights
up. [This does not happen when using
the AC adaptor (DMW-AC6; optional).]
If the remaining battery power is low,
the screen may be turned off for a
longer period of time.
• When you take a picture beyond the
available fl ash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
•
The white balance may not be properly
adjusted if the photo fl ash is insuffi cient. (P60)
• When the shutter speed is fast, the fl ash
effect may not be suffi cient.
• When you repeat taking a picture,
recording may be disabled even if the
fl ash is activated. Take a picture after the
access indication disappears.
•
The red-eye reduction effect differs
between people. Also, if the subject was far
away from the camera or was not looking at
the fi rst fl ash, the effect may not be evident.
• You cannot take photographs in
succession when using the fl ash.
43
VQT1C63
Advanced-Shooting
Taking Pictures with the Self-timer
1 Press w [].
2 Press e/r or w [ ] to switch the
self-timer mode.
3 Press [MENU/SET].
• You can also press the shutter button
halfway to fi nish.
• When 5 seconds pass without any
operation, the setting selected at the time
is automatically adopted.
4 Press the shutter button halfway
to focus and then press it fully to
take a picture.
• The self-timer indicator
A blinks and the shutter
is activated after 10
seconds (or 2 seconds).
• If you press [MENU/
SET] when the self-timer
is set, the self-timer
setting is canceled.
• When using a tripod or in other cases,
setting the self-timer to 2 seconds is
a convenient way to stabilize the jitter
caused by pressing the shutter button.
• When you press the button fully with
one stroke, the subject is automatically
focused just before the recording. In dark
places, the self-timer indicator blinks and
then it may turn on brightly to work as the
AF assist lamp (P66) for focusing on the
subject.
• In simple mode [ ], the self-timer is
fi xed to 10 seconds.
• When you set the self-timer in burst
mode, the camera starts taking a picture
2 or 10 seconds after the shutter button
is pressed. The number of pictures taken
at one time is fi xed to 3.
• We recommend using a tripod when
setting the self-timer.
A
or
1
MENU
19
7M
CANCEL
MENU
SELFTIMER
SELECT SET
OFF
10SEC.
2SEC.
44
VQT1C63
Advanced-Shooting
Compensating the Exposure
Use this function when you cannot achieve
appropriate exposure due to the difference
of brightness between the subject and the
background.
Over exposed
Properly Exposed
Under exposed
1 Press e [C] to display [C
EXPOSURE] and press w/q to
compensate the exposure.
A : The exposure compensation value
• You can compensate from -2 EV to +2
EV in steps of 1/3 EV.
• Select [0 EV] to return to the original
exposure.
2 Press [MENU/SET] to fi nish.
• You can also press the shutter
button halfway to fi nish.
• EV is an abbreviation of “Exposure
Value”, and it is the amount of light given
to the CCD by the aperture value and the
shutter speed.
• The exposure compensation value
appears on the lower left of the screen.
• The exposure value is memorized even if
the camera is turned off.
• The compensation range of the exposure
will be limited depending on the
brightness of the subject.
• You cannot compensate the exposure
with [STARRY SKY] in scene mode.
Compensate the exposure
toward negative.
Compensate the exposure
toward positive.
MENU
EXPOSURE
SELECT EXIT
A
45
VQT1C63
Advanced-Shooting
Shooting with the Intelligent ISO mode
The camera detects movements of the
subject near the center of the frame and
sets the optimum ISO sensitivity and
shutter speed according to the movements
and brightness.
1 Press [MENU/SET].
2 Press e/r to select [ISO LIMIT]
and then press q.
3 Press e/r to select the menu
item and then press [MENU/SET].
Item Content
400 The camera raises the ISO
sensitivity up to the level you have
set to match the movement and
brightness of the subject.
800
1250
• The higher you raise the ISO sensitivity,
the less chance there is of the subject
blurring, but picture noise will increase.
• When shooting a moving subject indoors,
you can reduce blur by raising ISO
sensitivity and increasing the shutter
speed.
1/125 ISO800
• When taking pictures of a motionless
subject, you can reduce noise by setting
ISO sensitivity at a low level.
1/30 ISO200
• When you press the shutter button
halfway, [ ] appears. When you press
the shutter button fully, the shutter speed
and the ISO sensitivity appear for a while.
• Focus range is 5 cm (0.16 feet) (Wide)/30
cm (0.98 feet) (Tele) to Z.
•
ISO sensitivity can be raised to a maximum
of [ISO640] when using the fl ash (when
ISO Limit is set to anything other than
[ISO400]).
• Refer to P42 for the available fl ash range.
• Brightness or the subject’s moving speed
may cause pictures to blur.
• Movement detection may not be possible
in the following cases.
– When the moving subject is too small
– When the moving subject is on the
edge of the frame
– In case the subject began to move the
moment you pressed the shutter button
fully
• To avoid picture noises, we recommend
reducing the [ISO LIMIT] or setting [COL.
MODE] to [NATURAL] (P66).
• You cannot use the digital zoom.
ISO
F2.8
ISO
F2.8
ISO
F2.8
ISO
AWB
MENU
1
/
3
4:3
400
800
1250
ISO
MAX
REC
SELECT SET
W.BALANCE
ISO LIMIT
ASPECT RATIO
PICT.SIZE
QUALITY
46
VQT1C63
Advanced-Shooting
Taking Close-up pictures
This mode allows you to take close-up
pictures of the subject, e.g. When taking
pictures of fl owers.
You can take pictures approaching the
subject at a distance up to 5 cm (0.16 feet)
from the lens by rotating the zoom lever
upmost to Wide (1 ×).
■ Focus range
• Use a tripod and the self-timer (P43) for
best results.
• When the subject is close to the camera,
the effective focus range (depth of fi eld)
is signifi cantly narrowed. Therefore,
you will have diffi culty in focusing on
the subject if the distance between the
camera and the subject is changed after
focusing on the subject.
• When the camera lens is at a distance
beyond the available range from the
subject, the subject may not be focused
even if the focus indication lights.
• Macro mode gives priority to a subject
close to the camera. Therefore, if the
distance between the camera and the
subject is more than 50 cm (1.64 feet) it
takes longer to focus on it in macro mode
than normal picture mode.
• The available fl ash range is about 30 cm
(0.98 feet) to 5.0 m (16.40 feet) (Wide).
(This is applied when you set the ISO
sensitivity to [AUTO].) We recommend
setting the fl ash to Forced OFF [v]
when you take pictures at close range.
• When you take pictures at close range,
the resolution of the periphery of the
picture may decrease slightly. This is not
a malfunction.
T
W
30 cm
(0.98 feet)
5 cm
(0.16 feet)
47
VQT1C63
Advanced-Shooting
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• See pages 48 to 52 for details about the
modes. Explanations about the scene
modes are also included in the camera’s
[ INFORMATION] feature.
1 Press q to enter the scene mode
menu screen.
2 Press e/r/w/q to select the
scene mode.
• Press r at A to switch to the next menu
screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET].
• Now you can take pictures with the scene
mode that you selected.
• Press [MENU/SET] and then perform
steps 1, 2 and 3 to change the scene
mode.
■ Scene mode help [ INFORMATION]
• To see explanations about the scene
modes, press [DISPLAY] while a scene
mode is selected in step 2. Press again
to return to the scene mode menu.
• Refer to P42 for the shutter speed.
• Flash settings return to the factory
settings when you change the scene
mode (P41).
• The color of the picture may seem
strange if you use a scene mode that is
unsuitable for the shot.
• [SCN] is selected if you press w while
you have selected either [PORTRAIT]
or [STARRY SKY] in step 2. If you
select either the [REC] menu [ ] or
the [SETUP] menu [ ], you can set the
desired items. (P19)
• The following cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [COL.MODE]
Scene mode
MENU
DISPLAY
INFORMATION
SETCANCEL
BABY1
Suitable for taking pictures
of your baby.
Age can be displayed
with pictures if you set
the birthday.
1
/
2
SCN
MENU
DISPLAY
2
/
2
SCN
MENU
DISPLAY
STARRY SKY
SCENE MODE
SELECT SET
BABY1
SCENE MODE
SELECT SET
A
48
VQT1C63
Advanced-Shooting
Portrait mode
The background is blurred and the person
stands out with a healthier complexion.
■ Technique to make this mode more
effective:
1 Rotate the zoom lever to Tele as far as
possible.
2 Move close to the subject.
• Suitable for outdoors in the daytime.
• ISO sensitivity is fi xed to [ISO100].
Soft skin mode
The camera detects the face or skin area
to achieve a smoother appearance than
portrait mode. Use when taking portraits
from the chest up.
■ Technique to make this mode more
effective:
1 Rotate the zoom lever to Tele as far as
possible.
2 Move close to the subject.
• Suitable for daylight shooting.
• Other fl esh-colored elements are also
softened.
• The effect may not be as obvious if there
isn’t enough light.
• ISO sensitivity is fi xed to [ISO100].
Scenery mode
The camera focuses on distant subjects
to allow you to take pictures of wide
landscapes.
• Focus range is 5 m (16.4 feet) to Z.
• The Flash setting is fi xed to Forced OFF
[v].
• The setting on the AF assist lamp is
disabled.
•
You cannot change the white balance setting.
Sports mode
Allows you to shoot fast moving subjects
(e.g. outdoor sports).
• Suitable for daylight shooting, 5 m (16.4
feet) or more away from the subject.
• When shooting fast moving subjects
indoors, sensitivity will be the same
as when you have set ISO LIMIT in
Intelligent ISO mode [ ] (P45) to
[ISO800].
• The digital zoom is fi xed to [OFF].
Night portrait mode
Shoot the subject with natural brightness
using the fl ash and slow shutter speed.
■ Technique for Night portrait mode
• Use the fl ash.
• Due to the slow shutter speed, use a
tripod and the self-timer (P43) for best
results.
• Keep the subject still for about 1 second
after taking a picture.
• Rotate the zoom lever to Wide (1 ×),
about 1.5 m (4.92 feet) from the subject.
• Focus range is 1.2 m (3.94 feet) to 5
m (16.4 feet). (See page 41 for details
about available fl ash range.)
• The shutter may close (max. about
1 sec.) after shooting due to signal
processing. This is not a malfunction.
• When shooting in dark places, noise may
become visible.
• When using the fl ash, Slow sync./Red-
eye reduction [u] is selected and
the fl ash is activated every time.
• You cannot change the white balance
setting.
MENU
SET
T
e
V
U
X
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)
49
VQT1C63
Advanced-Shooting
Night scenery mode
The nightscape can be recorded vividly.
■ Technique for Night scenery mode
• Use a tripod as the shutter may be open
for as long as 8 seconds. Use the self-
timer for best results. (P43)
• The focus range is 5 m (16.4 feet) to Z.
• The shutter may close (max. about 8
seconds) after shooting due to signal
processing. This is not a malfunction.
• When shooting in dark places, noise may
become visible.
• The Flash setting is fi xed to Forced OFF
[v].
• The ISO sensitivity is fi xed to [ISO100].
• The settings on the AF assist lamp is
disabled.
• You cannot change the white balance
setting.
Food mode
Use to take pictures of food in restaurants,
irrespective of the lighting, so that the
natural colors of the subject come out.
• Focus range is 5 cm (0.16 feet) (Wide)/30
cm (0.98 feet) (Tele) to Z.
• You cannot change the white balance
setting.
Party mode
Use to take pictures at wedding receptions,
indoor parties, etc. Both the people and
the background can be shot with natural
brightness using the fl ash and slow shutter
speed.
■ Technique for Party mode
• Use a tripod and the self-timer (P43) for
best results.
• Rotate the zoom lever to Wide (1 ×),
about 1.5 m (4.92 feet) from the subject.
• The fl ash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
• You cannot change the white balance
setting.
Candle light mode
Use to get the most from the mood created
by candlelight.
■ Technique for Candle light mode
• Don’t use the fl ash.
• Use a tripod and the self-timer (P43) for
best results.
• The focus range is 5 cm (0.16 feet)
(Wide)/30 cm (0.98 feet) (Tele) to Z.
• The fl ash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
•
You cannot change the white balance setting.
MENU
SET
W
f
a
g
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)
50
VQT1C63
Advanced-Shooting
Sunset mode
Use to take pictures of the sunset. Sunset
color can be reproduced vividly.
• The fl ash setting is fi xed to Forced OFF
[v].
• The setting on the AF assist lamp is
disabled.
• ISO sensitivity is fi xed to [ISO100].
•
You cannot change the white balance setting.
Baby mode 1
Baby mode 2
Adjusts the exposure and tone to bring
out the healthy color of your baby’s skin.
The fl ash will be weaker than normal if you
choose to use it.
You can set the birthdays of two babies
by using [BABY1] and [BABY2]. You can
display the set age when playing back
the pictures and imprint the age on the
recorded pictures with [DATE STAMP]
(P75).
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
software on the included CD-ROM to
print your baby’s age. (For details, refer
to the separate operating instructions for
PC connection.)
■ Age display setting
• To show age, fi rst enter the birthday,
select [WITH AGE], and press [MENU/
SET].
■ Birthday setting
1 Select [BIRTHDAY SET.] and press
[MENU/SET].
2 [PLEASE SET THE BIRTHDAY OF THE
BABY] appears. Select year/month/day
with w/q and change the date with e/r.
3 Press [MENU/SET] to exit.
• Focus range is 5 cm (0.16 feet) (Wide)/30
cm (0.98 feet) (Tele) to Z.
• Sensitivity will be the same as when you
have set ISO LIMIT in Intelligent ISO
mode [ ] (P45) to [ISO400].
• After turning on the camera in [BABY1]/
[BABY2] in scene mode, the age, current
date, and time appear for about 5
seconds at the bottom of the screen.
• Actual age displays depend on the
[LANGUAGE] setting.
• Check the clock and birthday settings if
the age shown is incorrect.
• Note that if you select [WITHOUT AGE],
age information is not recorded. The
information will not appear even if you
select [WITH AGE] after taking pictures.
• To reset the birthday setting, use
[RESET] in the [SETUP] menu. (P23)
• The digital zoom is fi xed to [OFF].
Pet mode
Suitable for taking pictures of your pet.
Keep a record of your pet’s development
by adding the date. You can display the set
age when playing back the pictures and
imprint the age on the recorded pictures
with [DATE STAMP] (P75).
• Displays and settings are the same as
for the baby modes. For details on how
to set age and birthday, see [BABY1]/
[BABY2].
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
software on the included CD-ROM to
print the pet’s age. (For details, refer to
the separate operating instructions for
PC connection.)
MENU
SET
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)
1
2
MENU
1
BABY1
SELECT SET
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL
51
VQT1C63
Advanced-Shooting
• Focus range is 5 cm (0.16 feet) (Wide)/30
cm (0.98 feet) (Tele) to Z.
• Sensitivity will be the same as when you
have set ISO LIMIT in Intelligent ISO
mode [ ] (P45) to [ISO400].
• After turning on the camera in [PET] in
scene mode, the age, current date, and
time appear for about 5 seconds at the
bottom of the screen.
• Actual age displays depend on the
[LANGUAGE] setting.
• Check the clock and birthday settings if
the age shown is incorrect.
• Note that if you select [WITHOUT AGE],
age information is not recorded. The
information will not appear even if you
select [WITH AGE] after taking pictures.
• To reset the birthday setting, use
[RESET] in the [SETUP] menu. (P23)
• The digital zoom is fi xed to [OFF].
• The AF assist lamp (P66) is changed to
[OFF].
High Sensitivity mode
Allows you to take pictures at [ISO3200]
level with high sensitivity processing.
• Focus range is 5 cm (0.16 feet) (Wide)/30
cm (0.98 feet) (Tele) to Z.
• The resolution of the recorded picture
decreases signifi cantly because of high
sensitivity processing. This is not a
malfunction.
• The fl ash setting is fi xed to Forced OFF
[v].
• You cannot use the extended optical
zoom or digital zoom.
Beach mode
Prevents under exposure of the subject
under strong sunlight to allow you to take
pictures on a beach.
• Do not touch the camera with wet hands.
• Sand or seawater may cause the camera
to malfunction. Make sure that sand or
seawater does not come in touch with
the camera, particularly its lens, fl ash or
terminals.
•
You cannot change the white balance setting.
Starry sky mode
Take clear pictures of the night sky or
other dark subjects.
■ Setting the shutter speed
Choose a shutter speed; 15, 30, or 60
seconds.
1 Press e/r to select the shutter speed,
then press [MENU/SET].
•
To change the shutter speed, press
[MENU/SET], then select [STARRY SKY]
again with q.
2 Take a picture.
•
The countdown screen appears. Do not
move the camera. [PLEASE WAIT...]
appears for the number of seconds
you chose for shutter speed after the
countdown. This is to process the signals.
• To cancel the shot, press [MENU/SET]
while the countdown screen is displayed.
MENU
SET
MENU
STARRY SKY
SELECT SET
15 SEC.
30 SEC.
60 SEC.
CANCEL
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)
d
OFF
MENU
15
7M
CANCEL
52
VQT1C63
Advanced-Shooting
■ Technique for Starry sky mode
• The shutter opens for 15, 30 or 60
seconds, so use a tripod and the self-
timer (P43) for best results.
• The LCD darkens automatically.
• The histogram is always orange. (P38)
•
The Flash setting is fi xed to Forced OFF [
v
].
• The ISO sensitivity is fi xed to [ISO100].
• You cannot use exposure compensation,
white balance adjustment, stabilizer
function or burst mode.
Fireworks mode
Take beautiful pictures of fi reworks
exploding in the night sky.
■ Technique for Fireworks mode
• Shutter speed becomes slower so use a
tripod.
• This is most effective on subjects 10 m
(32.8 feet) or more from the camera.
• The shutter speed becomes:
– When [OFF] is set on the optical image
stabilizer function: 2 seconds
– When optical image stabilizer [MODE1]
or [MODE2] is on: 1/4th or 2 seconds
(The shutter speed becomes 2 seconds
when the camera determines that
there is little jitter such as when using a
tripod etc.)
• Histogram is always displayed in orange.
(P38)
• The Flash setting is fi xed to Forced OFF
[v].
• You cannot change the AF mode setting.
• AF area is not displayed.
• The settings on the AF assist lamp is
disabled.
• ISO sensitivity is fi xed to [ISO100].
• You cannot change the white balance
setting.
Snow mode
Exposure and white balance are adjusted
to make the white of the snow stand out.
• You cannot change the white balance
setting.
Aerial photo mode
Allows you to take pictures through an
airplane window.
■ Technique for Aerial photo mode
Use this technique if it is diffi cult to focus
when taking pictures of clouds etc. Aim the
camera at something with high contrast,
press the shutter button halfway to fi x the
focus, then aim the camera at the subject
and press the shutter button fully to take
the picture.
• Turn the camera off when taking off or
landing.
• When using the camera, follow all
instructions from the cabin crew.
• Be careful about the refl ection from the
window.
• The fl ash setting is fi xed to Forced OFF
[v].
• The setting on the AF assist lamp is
disabled.
• You cannot change the white balance
setting.
MENU
SET
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)
Z
b
53
VQT1C63
Advanced-Shooting
Motion picture mode
1 Press the shutter button halfway
to focus and then press it fully to
start recording.
A: Available recording time
B: Elapsed recording time
• When the subject is focused, the focus
indication lights.
• The focus, zoom and aperture value are
fi xed to those set at the beginning of
recording (for the fi rst frame).
• When you use the optical image stabilizer
function, only [MODE1] is available in
motion picture mode.
2 Press the shutter button fully to
stop recording.
• If the built-in memory or the card
becomes full in the middle of
recording, the camera stops recording
automatically.
■ Changing the aspect ratio and the
picture quality settings
1 Press [MENU/SET].
2 Press e/r to select [ASPECT
RATIO] and then press q.
3 Press e/r to select the item and
then press [MENU/SET].
4 Press e/r to select [PICT.MODE]
and then press q.
5 Press e/r to select the item and
then press [MENU/SET].
■
When the aspect ratio setting is [
h
]
Item Picture size fps
30fpsVGA 640 × 480 pixels 30 fps
10fpsVGA 640 × 480 pixels 10 fps
30fpsQVGA 320 × 240 pixels 30 fps
10fpsQVGA 320 × 240 pixels 10 fps
■
When the aspect ratio setting is [
j
]
Item Picture size fps
30fps16:9 848 × 480 pixels 30 fps
10fps16:9 848 × 480 pixels 10 fps
• fps (frame per second); This refers to the
number of frames used in 1 second.
1
R10S
30fps
VGA
5
S
A
B
AWB
MENU
1
/
2
30fps
VGA
10fps
VGA
30fps
QVGA
10fps
QVGA
REC
SELECT SET
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
STABILIZER
AWB
MENU
1
/
2
4:3
MODE1
W
16:9
REC
SELECT SET
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
STABILIZER
54
VQT1C63
Advanced-Shooting
• You can record smoother motion pictures
with 30 fps.
• You can record longer motion pictures
with 10 fps although the picture quality is
lower.
• [10fpsQVGA]:
The fi le size is smaller, so the fi les are
suitable to be attached to e-mails.
* You can only record to the built-in
memory if the picture size is set to
“30fpsQVGA” / “10fpsQVGA”.
6 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
• The focus range is 5 cm (0.16 feet) to Z
(Wide), 30 cm (0.98 feet) to Z (Tele).
• Refer to P106 for information about the
available recording time.
• The remaining recordable time shown on
the LCD may not reduce regularly.
• You cannot record audio.
• This camera cannot take motion pictures
if you are using a MultiMediaCard.
• When [PICT.MODE] is set to [30fpsVGA]
or [30fps16:9], we recommend you to
use cards offering “10 MB/s” or higher
speeds (printed on their packages and
elsewhere) for best results.
• Depending on the type of SD Memory
Card or SDHC Memory Card, recording
may stop in the middle.
• We recommend using Panasonic’s SD
Memory Card/SDHC Memory Card.
• Depending on the type of card you are
using, the card access indication may
appear for a while after shooting motion
pictures. This is normal.
• The volume of motion picture is limited
to 2 GB per recording session. The
maximum available recording time for up
to 2 GB only is displayed on the screen.
• When motion pictures recorded with
this camera are played back on other
equipment, the quality of pictures may
be deteriorated or it may not be possible
to play them back. Also the recording
information may not be displayed
correctly.
• In motion picture mode [i], you cannot
use the direction detection function and
the review function.
• You cannot set [MODE2] on the Optical
Image Stabilizer function.
55
VQT1C63
Advanced-Shooting
By setting the departure and return dates,
you can record which date of the vacation
you take a picture. The day of the vacation
is shown when you play a picture and you
can add it to the picture for printing with
[DATE STAMP] (P75).
• When you play back a picture, the date
on which it was taken is displayed.
• The number of days that have passed
since the departure date can be
printed on each picture by using the
software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the CD-
ROM (supplied). (For information about
printing, refer to the separate operating
instructions for PC connection.)
■ Setting the travel date
(Screen shows an example for the
normal picture mode [ ])
1 Press [MENU/SET] and then
press w.
2 Press r to select the [SETUP]
menu icon [ ] and then press q.
3 Press e/r to select [TRAVEL
DATE] and then press q.
4 Press r to select [SET] and then
press [MENU/SET].
5 Press e/r/w/q to select the
departure date and then press
[MENU/SET].
w/q: Select the desired item.
e/r: Set the year, month and date.
6 Press e/r/w/q to set the return
date and then press [MENU/SET].
w/q: Select the desired item.
e/r: Set the year, month and date.
• The travel date is cleared if the current
date is after the return date.
• If you have not set the return date,
press [MENU/SET] while “– – – ” is
displayed.
7 Press [MENU/SET] to exit the
menu.
Recording which day of the vacation you take the picture
MENU
SET
MENU
+
-
0
1
/
3
SETUP
SELECT SET
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
OFF
SET
100-0001
1/19
7M
:..
10 00 DEC 1 2007
1ST DAY
MENU
SET
..
MENU
TRAVEL DATE
SELECT SET
PLEASE SET THE
DEPARTURE DATE
DEC 2 2007
MENU
SET
..
MENU
TRAVEL DATE
SELECT EXIT
PLEASE SET THE
RETURN DATE
– – – – – – – – –
56
VQT1C63
Advanced-Shooting
8 Take a picture.
• The day of the vacation A appears for
about 5 seconds after setting the travel
dates and when the camera is turned on
when the travel date is set.
• When [TRAVEL DATE] is set, [ ]
appears on the lower right of the screen.
(It is not displayed if the current date is
after the return date.)
■ Canceling the travel date
The travel date is cleared if the current
date is after the return date. If you want to
cancel part way through the setting, select
[OFF] in step 4 and press [MENU/SET]
twice.
• The travel date is calculated using the
date in the clock setting (P17) and
the departure date you set. If you set
[WORLD TIME] (P57) to the travel
destination, the travel date is calculated
using the date in the clock setting and the
travel destination setting.
• The travel date setting is memorized
even if the camera is turned off.
• If you set a departure date and then take
a picture on a date before this departure
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• If you set a departure date and then
change the clock setting to the date and
time at the travel destination, [-] (minus)
is displayed in white and the day of the
vacation that you took the picture on is
recorded when the travel destination
date is, for example, one day before the
departure date.
• If [TRAVEL DATE] is set to [OFF],
the number of days that have passed
since the departure date will not be
recorded even if you set the travel
date. Even if [TRAVEL DATE] is set to
[SET] after taking the pictures, the day
of the vacation you took them on is not
displayed.
• Set the clock (P17) if the message
“PLEASE SET THE CLOCK” appears.
• The travel dates are also used in the
simple mode [ ].
19
7M
:..
A
10 00 DEC 1 2007
1ST DAY
57
VQT1C63
Advanced-Shooting
Displaying the time at the travel destination
If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P17)
1 Press [MENU/SET] and then
press w.
2 Press r to select the [SETUP]
menu icon [ ] and then press q.
3 Press e/r to select [WORLD
TIME] and then press q.
• If you are setting the world time for the
fi rst time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the screen
shown in step 2 in “Setting the home
area [HOME]”.
■ Setting the home area [HOME]
(Perform steps 1, 2 and 3.)
1 Press r to select [HOME] and then
press [MENU/SET].
2 Press w/q to select your home area
and then press [MENU/SET].
• The current time is displayed on the top
left of the screen and the time difference
from GMT (Greenwich Mean Time)
is displayed on the bottom left of the
screen.
• If daylight saving time [ ] is used at
the home area, press e. Press e again
to return to the original time.
• The daylight saving time setting for the
home area does not advance the current
time. Advance the clock setting by one
hour. (P17)
MENU
10:00
GMT -5:00
SELECT SET
CANCEL
Toronto
New York
Miami
Lima
MENU
SET
MENU
:..
MENU
SET
WORLD TIME
DESTINATION
HOME
10 00 JAN 1 2007
CANCEL SETSELECT
MENU
1
/
3
SETUP
SELECT EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
± 0
OFF
58
VQT1C63
Advanced-Shooting
MENU
--
:
-- --
.
--
.
----
MENU
SET
Finishing setting the home area
• If you are setting the home area for the
fi rst time, the screen returns to the screen
shown in step 1 of “Setting the home
area [HOME]” after you press [MENU/
SET] to set your home area. Press w
to return to the screen shown in step 3
and then press [MENU/SET] to close the
menu.
• If you are setting the home area for the
second time etc., the screen returns to
the screen shown in step 3 after you
press [MENU/SET] to set your home
area. Press [MENU/SET] again to close
the menu.
■ Setting the travel destination area
(Perform steps 1, 2 and 3 on P57.)
1 Press e to select [DESTINATION] and
then press [MENU/SET] to set.
A: Depending on the setting, the time at
the travel destination area or the home
area is displayed.
• If you are setting the travel destination
area for the fi rst time, the date and time
are displayed as shown in the screen
above.
2 Press w/q to select the area the travel
destination is in and then press [MENU/
SET] to set.
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time difference
from the home area is displayed at the
bottom left of the screen.
• If daylight saving time [ ] is used in
your travel destination, press e. (The
time advances by one hour.) Press e
again to return to the original time.
3 Press [MENU/SET] to close the menu.
• The icon changes from [ ] to [ ] after
setting the travel destination.
• Return the setting to [HOME] when
the vacation is fi nished by performing
steps 1, 2, 3 and then steps 1 and 2 of
“Setting the home area [HOME]” (P57).
• If you cannot fi nd the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
• The [WORLD TIME] setting also affects
simple mode [ ].
• Now when you play photographs taken
while on holiday, the travel icon [ ]
appears.
+14:30
10:00 0:30
MENU
SET
SELECT SET
CANCEL
Adelaide
MENU
1
/
3
SETUP
SELECT EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
± 0
OFF
WORLD TIME
DESTINATION
HOME
CANCEL SET
SELECT
A
59
VQT1C63
Advanced-Shooting
Using the [REC] mode menu
Setting the hue, picture quality adjustment,
etc. allows you to create wide variations on
taking pictures. The menu items that can
be set differ depending on the recording
mode.
■ Using the [REC] mode menu
Press [MENU/SET] to show the recording
menu, then select the item you want to
change (P19).
Items you can set
(In normal picture mode [ ])
Menu page Item
Page 1
K
W.BALANCE (P60)
J
SENSITIVITY (P61)
i
ASPECT RATIO (P62)
Z
PICT.SIZE (P62)
Q
QUALITY (P62)
Page 2
M
AF MODE (P63)
STABILIZER (P64)
BURST (P65)
N
AF ASSIST LAMP (P66)
O
D.ZOOM (P32)
Page 3
T
COL.MODE (P66)
3
CLOCK SET (P66)
■ Using the quick setting
You can use the [FUNC] button to easily
set the following 6 items when recording
(In normal picture mode [ ]).
• [STABILIZER]
• [BURST]
• [W.BALANCE]
• [SENSITIVITY]
• [PICT.SIZE]
• [QUALITY]
1 In shooting mode, press and hold
[FUNC] until the quick setting
items appear.
2 Press e/r/w/q to select the
menu item and setting and then
press [MENU/SET] to close the
menu.
• You can also close the menu by pressing
[FUNC].
• The [|] (White Set) setting for
white balance does not appear when
using the quick setting.
9
MENU
FUNC
7M
1
AWB
AUTO
AWB
OFF
SELECT EXIT
9
MENU
MENU
SET
7M
1
AWB
AUTO
AUTO
100
200
400
800
1250
ISO
ISO
ISO
ISO
ISO
OFF
SELECT EXIT
60
VQT1C63
Advanced-Shooting
[W.BALANCE]
Adjusting the hue for a more
natural picture
This function allows you to reproduce a
white color closer to the tone in real life
on the pictures recorded under sunlight,
halogen lighting, etc. in which the white
color may appear reddish or bluish. Select
a setting that matches the recording
conditions.
AWB for auto setting (auto
white balance)
k (Daylight)
for recording
outdoors on a bright
day
l (Cloudy)
for recording
outdoors on a cloudy
day
(Shade) for recording in
shaded areas
outdoors on a bright
day
m (Halogen)
for recording under
halogen lighting
o (White set)
for using the preset
white balance
p (White set)
for using set mode
with a different white
balance setting
■ Auto White Balance (AWB)
Use of auto white balance adjustment
in inappropriate lighting conditions may
result in reddish or bluish pictures. Where
the subject is surrounded by many light
sources or there are no white or whitish
objects in the frame, auto white balance
adjustment may not operate properly.
In this case, set the white balance to a
mode except [AWB] manually.
1 The range that is controlled by the auto
white balance adjustment mode of this
camera
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fl uorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
K=Kelvin Color Temperature
1)
2)
4)
6)
7)
8)
9)
10)
3)
5)
K
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
61
VQT1C63
Advanced-Shooting
■ Setting the white balance manually
(White set |)
Use this to set the white balance manually.
1 Select [|] (White set) and then
press [MENU/SET].
2 Aim the camera at a sheet of white
paper or a similar white object so that
the frame on the center of the screen
turns white and then press [MENU/SET].
3 Press [MENU/SET] twice to close the
menu.
• You can also press the shutter button
halfway to fi nish.
• The white balance may not be correct if
the subject is out of fl ash range.
• The white balance you set is saved
even if you switch the camera off, but if
you change the scene mode, the white
balance setting returns to [AWB].
• The white balance cannot be set in the
following cases:
– In simple mode [ ]
– [SCENERY], [NIGHT SCENERY],
[NIGHT PORTRAIT], [FOOD],
[PARTY], [CANDLE LIGHT],
[SUNSET], [FIREWORKS], [BEACH],
[STARRY SKY], [SNOW], or [AERIAL
PHOTO] in scene mode (P47)
[SENSITIVITY]
Setting the light sensitivity
ISO sensitivity represents the sensitivity
of the image sensor to light. If you set
the ISO sensitivity higher, the camera
becomes more suitable for recording in
dark places.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted to a
maximum of [ISO400] according to the
brightness. (When using the fl ash, the
adjustment range becomes a maximum
of [ISO640].)
ISO sensitivity 100 1250
Use in bright
places
(e.g. outdoors)
Suitable
Not
suitable
Use in dark
places
Not
suitable
Suitable
Shutter speed Slow Fast
Noise Less More
• The ISO sensitivity is fi xed to [ISO3200]
in [HIGH SENS.] (P51) in scene mode.
• To avoid picture noise we recommend
reducing the ISO sensitivity or setting
[COL.MODE] to [NATURAL]. (P66)
• If the camera is in Intelligent ISO mode
(P45), the screen changes to the one for
[ISO LIMIT].
• The ISO sensitivity cannot be set in the
following cases:
– In simple mode [ ]
– In motion picture mode [i]
– In scene mode
MENU
WHITE SET
CANCEL SET
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
J
62
VQT1C63
Advanced-Shooting
[ASPECT RATIO]
Setting the aspect ratio of
pictures
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
h
Select to take pictures with the
same aspect ratio as a 4:3 TV or
a computer monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
fi lm.
j
This is suitable for landscapes
etc. where a wide view is
preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-defi nition TV etc.
• You cannot choose [ ] during motion
picture mode [i] (P53).
• The ends of the recorded pictures may
be cut at printing. (P102)
[PICT.SIZE]/[QUALITY]
Setting a picture size and quality that
matches your use of the pictures
A digital picture is made of numerous dots
called pixels. Although you cannot see
the difference on the camera’s screen, the
more the pixels the fi ner the picture will
be when it is printed on a large piece of
paper or displayed on a computer monitor.
Picture quality refers to the compression
rate when saving digital pictures.
A Many pixels (Fine)
B Few pixels (Rough)
* These pictures are examples to show
the effect.
■ Number of pixels
Select a higher number of pixels for clearer
pictures when printing.
Select a lower number of pixels [ ] (0.3M
EZ) to store more pictures. Fewer pixels also
means it is easier to send pictures by e-mail
or use them on a homepage.
■ When the aspect ratio setting is
[h]
DMC-LS75/DMC-LS70
(7M)
3072 × 2304 pixels
DMC-LS60 only
(6M)
2816 × 2112 pixels
DMC-LS75/DMC-LS70
(5M EZ)
2560 × 1920 pixels
(3M EZ) 2048 × 1536 pixels
(2M EZ) 1600 × 1200 pixels
(1M EZ) 1280 × 960 pixels
(0.3M EZ) 640 × 480 pixels
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
i
Z
Q
A
B
7M
5M
3M
2M
1M
0.3M
0.3M
6M
63
VQT1C63
Advanced-Shooting
■
When the aspect ratio setting is [ ]
DMC-LS75/DMC-LS70
(6M)
3072 × 2048 pixels
DMC-LS60 only
(5M)
2816 × 1880 pixels
(2.5M EZ) 2048 × 1360 pixels
■
When the aspect ratio setting is [
j
]
DMC-LS75/DMC-LS70
(5.5M)
3072 × 1728 pixels
DMC-LS60 only
(4.5M)
2816 × 1584 pixels
(2M EZ) 1920 × 1080 pixels
■ Quality
G
Fine (Low compression):
This type gives priority to picture
quality. Picture quality will be high.
H
Standard (High compression):
This type gives priority to the
number of recordable pictures and
records standard quality pictures.
• The number of pixels that can be
selected differs depending on the aspect
ratio. If you change the aspect ratio, set
the picture size.
• [EZ] is an abbreviation of [Extended
optical Zoom]. (P30)
• The extended optical zoom does not
work in [HIGH SENS.] (P51) in scene
mode so the picture size for [EZ] is not
displayed.
• Pictures may have a mosaic-like
appearance depending on the subject or
the recording condition.
• Refer to P104 for the number of
recordable pictures.
• In simple mode [ ], the settings become
as follows.
– ENLARGE:
h/DMC-LS75/DMC-LS70:[ ]
(7M), DMC-LS60:[ ] (6M)/Fine
– 4˝ × 6˝/10 × 15 cm:
/[ ] (2.5M EZ)/Standard
– E-MAIL:
h/[ ] (0.3M EZ)/Standard
[AF MODE]
Setting the focus method
Select the mode that matches the
recording conditions and the composition.
5-area-focusing:
The camera focuses on any of 5
focus areas. This is effective when
the subject is not in the center of
the screen.
W
H
1-area-focusing (high speed):
The camera quickly focuses on
the subject in the AF area on the
center of the screen.
W
1-area-focusing:
The camera focuses on the subject
in AF area on the center of the
screen.
5.5M
2M
2.5M
2.5M
7M
0.3M
6M
M
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
MENU
SET
5M
4.5M
6M
64
VQT1C63
Advanced-Shooting
■ About 1-area-focusing (High speed)
• You can focus on the subject more
quickly than other AF modes.
• Pictures may become still in the condition
they were in before the subject was
focused when you press the shutter
button halfway. However, it is not a
malfunction.
• When using the
digital zoom or when
you take pictures in
dark places, the AF
area is displayed
on the center of the
screen with a size wider than usual.
• When multiple AF areas (max. 5 areas)
light at the same time, the camera is
focusing on all the AF areas. The focus
position is not predetermined because
it is set to the position the camera
automatically determines at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to 1-area-focusing or 1-area-
focusing (high speed) mode.
• In 5-area focusing mode, AF areas are
not displayed until the camera focused
on a subject.
• The AF mode cannot be set in simple
mode [ ] or [FIREWORKS] in scene
mode.
[STABILIZER]
This feature detects jitter and
corrects for it
MODE1
(7)
The stabilizer operates
continuously and can assist
during photo composition.
MODE2
(8)
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF
()
When image stabilization is not
desired.
■ About demonstration of jitter/
movement detection screen
Press q to display [JITTER, SUBJ. MOVE
DEMO.] when the [STABILIZER] screen
is displayed. You cannot shoot while the
demonstration is on. Press q again to stop
the demonstration.
A Jitter indicator
B Movement indicator
• The camera automatically detects
jittering and movement of the subject and
indicates them.
• The demonstrations are examples only.
• The automatic ISO sensitivity setting
using movement detection only works in
Intelligent ISO mode and the [SPORTS],
[BABY], and [PET] scene modes (P47).
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
A
B
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
EXIT
65
VQT1C63
Advanced-Shooting
• The stabilizer function may not work in
the following cases so take special care
not to move the camera when pressing
the shutter button.
– When too much jitter occurs.
– When the zoom magnifi cation is high.
– In digital zoom range.
– When taking pictures while following
subjects in motion.
– When the shutter speed is extremely
slow due to dark conditions or other
reasons.
• In simple mode [ ], the setting is fi xed
to [MODE2] and in [STARRY SKY] (P51)
in scene mode it is fi xed to [OFF].
• In motion picture mode [i], [MODE2]
cannot be set.
[BURST]
Shooting in quick succession
• Turn this mode [ON] and when you
press and hold the shutter button several
pictures are taken in succession.
• The burst speed will become slower
halfway. When it slows down depends
on the type of card, picture size, and
quality.
• You can take pictures until the capacity
of the built-in memory or the card is full.
• Burst speed slows when ISO sensitivity
(P45, 61) is higher than [ISO400].
• Shutter speed decreases in dark places,
so burst speed may also be slower.
• The focus is fi xed in the fi rst picture.
• The camera sets the exposure and white
balance for each picture in the series.
• When panning across areas with a
large difference in brightness, the
camera takes some time to get the right
exposure. This means that the exposure
may not be correct when taking pictures
in succession.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fi xed to 3.
• Burst mode is not canceled when the
camera is switched off.
• In Burst mode, auto review is activated
even if the setting is off. You cannot
change the auto review setting in the
setup menu.
• You can only take one photograph at a
time when using the fl ash.
• You cannot take photographs in
succession when the camera is in simple
mode [ ] or [STARRY SKY] in scene
mode.
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
66
VQT1C63
Advanced-Shooting
[AF ASSIST LAMP]
Focusing in low light conditions
becomes easier
Illuminating the subject with the AF assist
lamp allows the camera to focus on the
subject in low light conditions.
If the AF assist lamp is set to
[ON], an AF area (P63) with
a size wider than usual is
displayed and the AF assist
lamp A turns on.
ON The AF assist lamp turns on
under low light conditions. In this
time, the AF assist lamp icon
[S] appears on the screen. The
effective range of the AF assist
lamp is 1.5 m (4.92 feet).
OFF The AF assist lamp does not turn
on.
• Be sure of the following points when the
AF assist lamp is in use.
– Do not look into the AF assist lamp
closely.
– Do not cover the AF assist lamp with
your fi ngers or other objects.
• When you do not want to use the AF
assist lamp (e.g. when you take a picture
of animals in a dark place), set the [AF
ASSIST LAMP] to [OFF]. In this case, it
becomes diffi cult to focus on the subject.
• The AF assist lamp is fi xed to [ON] while
the camera is in simple mode [ ].
• You cannot use the AF assist lamp
in [SCENERY], [NIGHT SCENERY],
[SUNSET], [FIREWORKS] and [AERIAL
PHOTO] in scene mode. (P47)
• The AF assist lamp is changed to [OFF]
in [PET] (P50) in scene mode.
[COL.MODE]
Setting color effects for the
recorded pictures
You can use following types of color effects
depending on the image of the picture.
NATURAL Shoot softer pictures.
VIVID Shoot more vivid pictures.
B/W The picture becomes black
and white.
SEPIA The picture becomes sepia.
• Picture noises might stand out when
taking a picture in a dark place. To avoid
picture noises we recommend setting
[COL.MODE] to [NATURAL].
[CLOCK SET]
Setting the date, time and
display
Set the clock when you change the date or
time (P17).
MENU
SET
Press [ ] to display the [REC] mode menu and select the item to set. (P19)
N T
3
A
67
VQT1C63
Advanced-Viewing
Displaying Multiple Screens (Multi Playback)
1 Rotate the zoom lever towards
[ ] [W] to display multiple
screens.
For example: When you have chosen to
show 9 pictures
• : 1 screen➝9 screens➝
25 screens➝Calendar screen
display (P68)
• Rotate the zoom lever towards [3] [T] to
return to the previous screen.
2 Press e/r/w/q to select a
picture.
A: Number of the selected picture and the
total number of recorded pictures
• Depending on the recorded picture
and the setting, the following icons will
appear.
– [ ] (Favorites)
– [ ] (Motion picture)
– [K] ([BABY1]/[BABY2] in scene
mode)
– [ ] ([PET] in scene mode)
– [ ] (Travel date)
– [ ] (Travel destination)
– [ ] (Date stamp complete)
■ Example of 25 screens
■ To return to the normal playback
Rotate the zoom lever towards [3] [T], or
press [MENU/SET].
• The image you select is shown.
■ To delete a picture during a multi
playback
1 Press e/r/w/q to select a picture and
then press [A].
2 Press e to select [YES].
3 Press [MENU/SET].
• During multi playback, you cannot clear
the shooting information from the display
by pressing [DISPLAY].
• Pictures will not be displayed in the
rotated direction even if [ROTATE DISP.]
is set to [ON] (P74).
MENU
1/34..
CANCEL
DEC 1 2007
MENU
.. 5/34
CANCEL
DEC 1 2007
A
6/34
MENU
. .
CANCEL
DEC 1 2007
68
VQT1C63
Advanced-Viewing
Displaying pictures by recording date (Calendar playback)
You can display pictures by recording date
using the calendar playback function.
1 Rotate the zoom lever towards
[ ] [W] several times to display
the calendar screen.
• The recording date of the picture selected
in the playback screen becomes the date
selected when the calendar screen is fi rst
displayed.
• If there are multiple pictures with the
same recording date, the fi rst picture
recorded on that day is displayed.
2 Press e/r/w/q to select the date
to be played back.
e/r: Select the month
w/q: Select the date
• If there were no pictures recorded during
a month, the month is not displayed.
3 Press [MENU/SET] to display the
pictures that were recorded on
the selected date.
• Rotate the zoom lever towards [ ] [W]
to return to the calendar screen.
4 Press e/r/w/q to select a picture
and then press [MENU/SET].
• The selected picture is displayed on the 1
screen playback screen.
■ To return to the 1 screen playback
screen
After the calendar screen is displayed,
rotate the zoom lever towards [3] [T]
to display 25 screens, 9 screens and 1
screen. (P67)
• The pictures are displayed without being
rotated even if you set [ROTATE DISP.]
to [ON]. (P74)
• You can display the calendar between
January 2000 and December 2099.
• If the recording date of the picture
selected in 25 screens multi playback
is not between January 2000
and December 2099, the camera
automatically displays it in the oldest
calendar date.
• Pictures edited on a PC or processed on
other equipment may be displayed with
dates different from the actual recording
dates.
• If the date is not set in the camera (P17),
the recording date is set as January 1st,
2007.
• If you take pictures after setting the travel
destination in [WORLD TIME] (P57), the
pictures are displayed by the dates at the
travel destination in calendar playback.
SUN MON TUE WED THU FRI SAT
2007
12
2
9
16
23
30 31
3
17
24
4
11
18
25
12
19
26
6
13
20
27
7
14
21
28
8
1
15
22
29
5
10
MENU
DAY MONTH SET
MENU
1/34..
CANCEL
DEC 1 2007
69
VQT1C63
Advanced-Viewing
Using the Playback Zoom
1 Rotate the zoom lever towards
[3] [T] to enlarge the picture.
• 3: 1×➝2×➝4×➝8×➝16×
• When you rotate the zoom lever towards
[ ] [W] after enlarging the picture, the
magnifi cation becomes lower. When you
rotate the zoom lever towards [3] [T],
the magnifi cation becomes higher.
• When you change the magnifi cation, the
zoom position indication A appears for
about 1 second to check the position of
the section enlarged.
2 Press e/r/w/q to move the
position.
• When you move the position to be
displayed, the zoom position indication is
displayed for about 1 second.
■ To stop using the playback zoom
Rotate the zoom lever towards [ ] [W] or
press [MENU/SET].
■ To delete a picture during the
playback zoom
1 Press [A].
2 Press e to select [YES].
3 Press [MENU/SET].
• During playback zoom, you can clear the
shooting information from the display by
pressing [DISPLAY].
• The more the picture is enlarged, the
more its quality deteriorates.
• If you want to save the enlarged picture,
use the trimming function. (P81)
• The playback zoom may not operate if
pictures have been recorded with other
equipment.
4X
2X
A
CANCEL DELETE
4X
2X
CANCEL DELETE
70
VQT1C63
Advanced-Viewing
Playing Back Motion pictures
Press w/q to select a picture with a
motion picture icon [ ] / [ ] /
[ ] / [ ] / [ ] / [ ]
and then press r to play back.
• The motion picture recording time A
is displayed on the LCD monitor. After
playback starts, the elapsed playback
time is displayed on the bottom right of
the LCD monitor. For example, 1 hour 20
minutes and 30 seconds is displayed as
[1h20m30s].
• The cursor displayed during
playback corresponds to e/r/w/
q.
To stop motion picture playback
Press r.
Fast forwarding/Fast rewinding
During motion picture playback, keep
pressing w/q.
q: Fast forward
w: Fast rewind
• When releasing the button, it turns to
normal motion picture playback.
To pause
Press e during motion picture playback.
• Press e again to cancel pause.
Frame-by-frame forward/reverse
viewing
Press w/q during pause.
• The fi le format that can be played back
with this camera is QuickTime Motion
JPEG.
• Please note that the bundled software
includes QuickTime to play back motion
picture fi les created with the camera on
the PC (P84).
• Some QuickTime Motion JPEG fi les
recorded by a PC or other equipment
may not be played back with this camera.
• When playing back motion pictures
that have been recorded with other
equipment, the quality of pictures may be
deteriorated or it may not be possible to
play them back.
• You cannot play back the audio of motion
pictures with audio recorded on other
equipment.
• When using a high capacity card, it is
possible that fast rewinding may be
slower than usual.
• You cannot use the following functions
with motion pictures.
– Playback zoom (While playing back or
pausing motion pictures)
– [ROTATE DISP.]/[ROTATE]
– [DATE STAMP]
– [RESIZE]/[TRIMMING]
30fps
QVGA
30fps
VGA
10fps
VGA
30fps
16:9
10fps
16:9
10fps
QVGA
100-0001
1/19
15S
30fps
VGA
A
:..
10 00 DEC 1 2007
PLAY MOTION
PICTURE
71
VQT1C63
Advanced-Viewing
Using the [PLAY] mode menu
You can use various functions in playback
mode to rotate pictures, set protection for
them etc.
• Refer to P72 to 83 for each menu item.
1 Press [MENU/SET].
2 Press e/r to select the menu
item and then press q.
• Press r at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
• After selecting a menu item in step 2,
refer to the description of the menu
item in the operating instructions and
then set it.
Items you can set
Menu Page
Item
Page 1
a
SLIDE SHOW (P72)
FAVORITE (P73)
j
ROTATE DISP. (P74)
b
ROTATE (P74)
DATE STAMP (P75)
Page 2
l
DPOF PRINT (P77)
g
PROTECT (P79)
e
RESIZE (P80)
f
TRIMMING (P81)
COPY (P82)
Page 3
0
FORMAT (P83)
MENU
2
/
3
1
/
3
MENU
PLAY
SELECT EXIT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMP
OFF
ON
PLAY
SELECT EXIT
DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPY
A
72
VQT1C63
Advanced-Viewing
[SLIDE SHOW]
Playing back pictures in order
for a fi xed duration
This is recommended when playing back
pictures on a TV screen. You can skip
unwanted pictures if [FAVORITE] (P73)
has been set.
• The screen shown in step 1 appears
when [FAVORITE] is set to [ON]. When
[FAVORITE] is set to [OFF], perform step
2 onwards.
1 Press e/r to select [ALL] or [★]
and then press [MENU/SET].
ALL For playing back all pictures
★
For showing pictures in your
favorites list (P73)
• If none of the pictures have [★]
displayed, you cannot select [★] even if
[FAVORITE] is set to [ON].
2 Press e to select [START] and
then press [MENU/SET].
(Screen when [ALL] is selected)
• The cursor displayed during a slide show
A or while a slide show is paused B or
during [MANUAL] slide show C is the
same as e/r/w/q.
• Press e to pause the slide show. Press
e again to cancel pause.
• Press w/q while paused to display the
previous or next picture.
3 By pressing the r, the Slide
Show stops.
■ About playback duration
Select [DURATION] for setting on the
screen displayed in step 2.
DURATION Select intervals of 1, 2, 3,
5 seconds or MANUAL.
• You can select [MANUAL] if you have
selected [
★] in step 1.
• Press w/q to display the previous or next
picture when [MANUAL] is selected.
• You cannot play back motion pictures
and use power save in a slide show.
(However, the setting for power save
mode is fi xed to [10MIN.] while pausing a
slide show or playing back a manual slide
show.)
a
ABC
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
OFF
1
/
3
MENU
MENU
SET
PLAY
SELECT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMP
ALL
ON
SET
MENU
SET
MENU
ALL SLIDE SHOW
START
DURATION
2SEC.
CANCEL
SELECT SET
73
VQT1C63
Advanced-Viewing
[FAVORITE]
Setting your favorite pictures
You can do the following if a mark has
been added to pictures and they have
been set as favorites.
• Delete all the pictures not set as
favorites. ([ALL DELETE EXCEPT
★])
(P35)
• Play back the pictures set as favorites
only as a slide show. (P72)
• Print only the pictures set as favorites.
(P88)
1 Press r to select [ON] and then
press [MENU/SET].
• You cannot set pictures as favorites if
[FAVORITE] is set to [OFF]. Also the
favorites icon [★] will not appear when
[FAVORITE] is set to [OFF] even if it was
previously set to [ON].
• You cannot select [CANCEL] if none of
the pictures have [★] displayed.
2 Press [MENU/SET] to close the
menu.
3 Press w/q to select the picture
then press e.
• Repeat the above procedure.
• If e is pressed while the [★] favorites
icon A is displayed, [★] is cleared, and
the favorites setting is canceled.
• You can place up to 999 pictures in your
favorites list.
■ Canceling all favorites
1 Select [CANCEL] on the screen shown
in step 1 and then press [MENU/SET].
2 Press e to select [YES] and then press
[MENU/SET].
3 Press [MENU/SET] to close the menu.
• When printing pictures at a photo printing
store, [ALL DELETE EXCEPT
★] (P35)
is useful so only the pictures you want to
be printed remain on the card.
• Use [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] (on the
included CD-ROM) to change settings,
check, or erase your pictures in your
favorites list. (For details, refer to the
separate operating instructions for PC
connection.)
• You may not be able to put pictures you
have shot on other equipment into your
favorites list.
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
SET
OFF
ON
1
/
3
MENU
PLAY
SELECT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMP
OFF
ON
CANCEL
SET
100-0001
1/19
7M
A
:..
10 00 DEC 1 2007
74
VQT1C63
Advanced-Viewing
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
■ Rotate display
(The picture is automatically rotated
and displayed.)
1 Press r to select [ON] and then
press [MENU/SET].
• When you select [OFF], the pictures are
displayed without being rotated.
• Refer to P34 for how to play back
pictures.
2 Press [MENU/SET] to close the
menu.
■ Rotate
(The picture is rotated manually.)
1 Press w/q to select the picture
and then press r.
• When [ROTATE DISP.] is set to [OFF],
[ROTATE] function is disabled.
• Motion pictures and protected pictures
cannot be rotated.
2 Press e/r to select the direction
to rotate the picture and then
press [MENU/SET].
a
The picture rotates clockwise in
steps of 90°.
b
The picture rotates counter-
clockwise in steps of 90°.
3 Press [MENU/SET] twice to close
the menu.
• If you take pictures when aiming the
camera up or down, it may not be
possible to display the pictures vertically.
(P27)
• The picture may be slightly blurred when
the camera is connected to the TV with
the video cable (supplied) and played
back vertically.
• When you play the picture on a PC, you
cannot play rotated pictures without an
OS or a software compatible with Exif.
Exif is the fi le format for still pictures, to
which recording information and other
can be added, established by JEITA
[Japan Electronics and Information
Technology Industries Association].
• When playing back rotated pictures in
multi playback, pictures appear in original
orientation.
• You may not be able to rotate images
shot on other equipment.
j
b
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
SET
1
/
3
MENU
PLAY
SELECT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMP
OFF
OFF
ON
SET
MENU
100-0001
1/19
7M
SELECT
ROTATE
SET EXIT
MENU
SET
MENU
CANCEL
ROTATE
SELECT
SET
75
VQT1C63
Advanced-Viewing
[DATE STAMP]
Stamping the date on your
pictures
You can stamp your pictures with the date
of shooting, ages, and travel dates.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are
resized when you add the date to the
pictures taken with a resolution of more
than [ ].)
1 Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
• You cannot add the date to the following
images.
– Images taken when the clock is not set
– Images taken on other cameras
– Images that already have a date on
them
– Motion Pictures
2 Press w / q to choose a picture,
then press r.
• When you have selected [SINGLE] in
step 1, proceed to step 3.
• When you have selected [MULTI] in step
1, repeat step 2 for each picture, press
[MENU/SET], then proceed to step 3.
3 Press e/r/w / q to select
[SHOOTING DATE], [AGE], or
[TRAVEL DATE] and change the
settings for the item, and then
press [MENU/SET].
■ SHOOTING DATE
W/O TIME Date is added
WITH TIME Date and time are added
■ AGE (P50)
OFF Age not added
ON Age added
■ TRAVEL DATE (P55)
OFF Travel dates not added
ON Travel dates added
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
1
/
3
MENU
MENU
SET
PLAY
SELECT
SLIDE SHOW
FAVORITE
ROTATE DISP.
ROTATE
DATE STAMP
OFF
ON
SINGLE
MULTI
SET
MENU
100-0001
1/19
7M
DATE
SELECT
STAMP
SET EXIT
MENU
MENU
SET
DATE STAMP
W/O TIME
OFF
OFF
CANCEL
SHOOTING DATE
AGE
TRAVEL DATE
SELECT SET
3M
76
VQT1C63
Advanced-Viewing
4 Press [MENU/SET].
• Images are resized as follows when you
add the date to the pictures taken with a
resolution of more than [ ].
– h aspect ratio ➞
– aspect ratio ➞
– j aspect ratio ➞
5 Press e/r to select [YES] or [NO]
and press [MENU/SET].
(Screen when you have chosen an
image taken at [ ])
• The message [DELETE ORIGINAL
PICTURE?] appears when the picture is
taken with a resolution of [ ] or less.
• The image is replaced if you select
[YES]. The original image is overwritten
with the resized image that has the date
added.
• Select [NO] to save a new picture with
the date.
• You cannot save over the original picture
if it is protected. Select [NO] to save a
new picture with the date.
6 Press [MENU/SET] twice to close
the menu.
• Pictures that have been date stamped
will be marked with the date stamp
complete indicator A.
• To confi rm the date stamp B, use
playback zoom (P69).
• Note that if you use date stamp and
then specify printing the date when
you order prints or on a printer, both
dates will be printed and may overlap.
• Make sure there is some space available
on the built-in memory or card.
• It is possible to set up to 50 pictures at
one time using [MULTI].
• If protected pictures are included when
you use [MULTI], a message appears
when you select [YES] in step 5 and the
date stamp will not be imprinted on the
protected pictures.
• The date may be cut off with some
printers.
• Once you have added the date, you will
no longer be able to use the following
functions with the pictures.
– [DATE STAMP]
– Date print setting in [DPOF PRINT]
– [RESIZE]
– [TRIMMING]
7M
3M
3M
2.5M
2M
3M
MENU
MENU
SET
CANCEL
DATE STAMP
IT WILL BE STAMPED ON THE
PICTURE RESIZED TO .
DELETE ORIGINAL PICTURE?
YES
NO
3M
SELECT SET
100-0001
1/19
2007.12.1 10:00
B
A
3
M
10:00 DEC.1.2007
77
VQT1C63
Advanced-Viewing
[DPOF PRINT]
Setting the Picture to be Printed
and the Number of Prints
DPOF (Digital Print Order Format) is a
system that allows the user to select which
pictures to print, how many copies of each
picture to print and whether or not to print
the recording date on the pictures when
using a DPOF compatible photo printer
or photo printing store. For details, ask at
your photo printing store.
When you want to use a photo printing
store to print pictures recorded on the built-
in memory, copy them to a card (P82) and
then set the DPOF setting.
For more information please visit:
http://panasonic.jp/dc/dpof_110/white_
e.htm
Press e/r to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
• You cannot select [CANCEL] if there are
no prints that have been set in the DPOF
print settings.
■ Single setting
1 Press w/q to select the picture to
print and then press e/r to set
the number of prints.
• The number of prints icon [d] appears.
• The number of prints can be set from 0 to
999. When the number of prints is set to
“0”, DPOF print setting is canceled.
2 Press [MENU/SET] twice to close
the menu.
■ Multi setting
1 Press w/q to select the picture to
print and then press e/r to set
the number of prints.
• Repeat the above procedure. (You
cannot set all the pictures at one time.)
• The number of prints icon [d] appears.
• The number of prints can be set from 0 to
999. When the number of prints is set to
“0”, DPOF print setting is canceled.
2 Press [MENU/SET] twice to close
the menu.
l
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
SET
2
/
3
MENU
PLAY
SET
DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPY
SINGLE
MULTI
CANCEL
SELECT
1
DISPLAY
1
MENU
100-0001
1/19
DPOF SET THIS
COUNT DATE
SELECT
EXIT
11
1
DISPLAY
MENU
7
10
9
1
8
DPOF SET MULTI
COUNT DATE
SELECT
EXIT
78
VQT1C63
Advanced-Viewing
■ To cancel all settings
1 Press e to select [YES] and then
press [MENU/SET].
2 Press [MENU/SET] to close the
menu.
• DPOF print settings on the built-in
memory are canceled when a card is
not inserted. DPOF print settings on
the card are canceled when a card is
inserted.
■ To print the date
You can set/cancel the printing with the
recorded date each press of the [DISPLAY]
button when setting the number of prints.
• The date print icon [L] appears.
• When you go to a photo studio for digital
printing, be sure to order the printing of
the date additionally if required.
• The date may not be printed depending
on photo studios or printers even if you
set the date print. For further information,
ask the photo studio for details or refer to
the operating instructions of the printer.
• This function is not available for images
imprinted with the date stamp.
• This function is canceled if you imprint
the date stamp on the picture.
• DPOF is an abbreviation of [Digital Print
Order Format]. This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
• DPOF print setting is a convenient
function when you print pictures with
printers supporting PictBridge. The date
printing setting on the printer may take
priority over the date printing setting
on the camera. Check the date printing
setting on the printer also. (P87)
• When setting the DPOF print, delete any
previous DPOF print settings made by
other equipment.
• If the fi le is not based on the DCF
standard (P34), the DPOF print setting
cannot be set.
MENU
SET
MENU
CANCEL ALL DPOF
CANCEL ALL DPOF
PRINT SETTINGS?
SELECT
YES
NO
SET
1
DISPLAY
1
MENU
100-0001
1/19
DATE
DPOF SET THIS
COUNT DATE
SELECT
EXIT
79
VQT1C63
Advanced-Viewing
[PROTECT]
Preventing Accidental Erasure of
the Picture
You can set protection for the pictures you
do not want to delete to prevent them from
accidental erasure.
Press e/r to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
■ Single setting
1 Press w/q to select the picture
and then press r to set/cancel.
SET
The protect icon [c] appears.
CANCEL
The protect icon [c]
disappears.
2 Press [MENU/SET] twice to close
the menu.
■ Multi setting/To cancel all settings
Perform the same operation as in [[DPOF
PRINT] Setting the Picture to be Printed
and the Number of Prints]. (P77 and 78)
• The protect setting may not be effective
in other equipment.
• If you want to delete protected pictures,
cancel the protect setting fi rst.
• While this feature protects the pictures
from accidental erasure, formatting the
card will permanently delete all data.
(P83)
• Sliding the Write-Protect switch A of the
SD Memory Card or the SDHC Memory
Card to [LOCK] prevents pictures from
deletion even if protection is not set.
• The following functions cannot be used
with protected pictures.
– [ROTATE]
A
MENU
SET
2
/
3
MENU
PLAY
DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPY
SINGLE
MULTI
CANCEL
SELECT
g
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
SET
MENU
100-0001
1/19
PROTECT THIS
SELECT
SET/CANCEL EXIT
80
VQT1C63
Advanced-Viewing
[RESIZE]
Making the picture smaller
This function is useful if you want to reduce
the fi le size of the picture in cases when
it needs to be attached to an e-mail or
uploaded to a website.
1 Press w/q to select the picture
and then press r.
• The following pictures cannot be resized.
Aspect ratio Picture size
h
j
– Motion pictures
– Pictures imprinted with the date stamp
2 Press w/q to select the size and
then press r.
• Sizes smaller than the recorded picture
are displayed.
• The message [DELETE ORIGINAL
PICTURE?] appears.
3 Press e/r to select [YES] or [NO]
and then press [MENU/SET].
• When you select [YES], the picture is
overwritten. When resized pictures are
overwritten, they cannot be restored.
• When you select [NO], a resized picture
is newly created.
• When the original picture is protected,
you cannot overwrite the resized picture.
Select [NO] and newly create a resized
picture.
4 Press [MENU/SET] twice to close
the menu.
• You may not be able to resize pictures
you have shot on other equipment.
e
0.3M
2.5M
2M
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
100-0001
1/19
7M
RESIZE
SELECT
SET EXIT
MENU
100-0001
1/19
7M
7M
5M
RESIZE
SELECT
RESIZE EXIT
MENU
SET
MENU
RESIZE
DELETE ORIGINAL
PICTURE?
CANCEL
YES
NO
SELECT SET
81
VQT1C63
Advanced-Viewing
[TRIMMING]
Enlarging a picture and trimming it
Use this function when you trim
unnecessary parts of the recorded picture.
1 Press w/q to select the picture
and then press r.
• The following pictures cannot be
trimmed.
– Motion pictures
– Pictures imprinted with the date stamp
2 Enlarge or decrease the parts to
be trimmed with the zoom lever.
3 Press e/r/w/q to move the
position of the part to be
trimmed.
4 Press the shutter button.
• The message [DELETE ORIGINAL
PICTURE?] appears.
5 Press e/r to select [YES] or [NO]
and then press [MENU/SET].
• When you select [YES], the picture is
overwritten. When trimmed pictures are
overwritten, they cannot be restored.
• When you select [NO], a trimmed picture
is newly created.
• When the original picture is protected,
you cannot overwrite the trimmed picture.
Select [NO] and newly create a trimmed
picture.
6 Press [MENU/SET] twice to close
the menu.
• If you trim a picture, the number of pixels
may be fewer in the trimmed picture than
in the original.
• The picture quality of the trimmed picture
may be deteriorated.
• It may not be possible to trim pictures
recorded with other equipment.
f
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
100-0001
1/19
7M
TRIMMING
SELECT
SET EXIT
MENU
SET
MENU
TRIMMING
DELETE ORIGINAL
PICTURE?
CANCEL
YES
NO
SELECT SET
82
VQT1C63
Advanced-Viewing
[COPY]
Copying the picture data
You can copy recorded picture data from
the built-in memory to a card or vice versa.
1 Press e/r to select the copy
destination and then press
[MENU/SET].
• :
All the picture data in the built-in memory
are copied onto the card at one time.
(Perform step 3)
• :
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2 Press w/q to select the picture
and then press r.
(Only when is selected)
3 Press e to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• The message [COPY THIS PICTURE TO
BUILT-IN MEMORY?] appears when you
copy picture from the card to the built-in
memory.
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
• Do not turn the camera off or do any
other operations before copying is
fi nished. The data on the built-in memory
or the card may be damaged or lost.
4 Press [MENU/SET] several times
to close the menu.
• If you copy picture data from the
built-in memory to a card, the screen
automatically returns to the playback
screen when all the pictures are copied.
• If you copy picture data from the built-in
memory to a card which does not have
suffi cient free space, the picture data will
only be copied halfway. We recommend
using a card which has more free space
than the built-in memory (about 27 MB).
• You cannot copy an image fi le if there is
already a fi le in the destination that has
the same name (same fi le and folder
numbers).
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with
a Panasonic digital camera, you may not
be able to copy them if they were edited
with a PC.)
• DPOF settings on the original picture
data will not be copied. Set the DPOF
settings again after copying is fi nished.
(P77)
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
SET
2
/
3
MENU
PLAY
SELECT SET
DPOF PRINT
PROTECT
RESIZE
TRIMMING
COPY
MENU
MENU
SET
COPY
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD?
SELECT
YES
NO
SET
83
VQT1C63
Advanced-Viewing
[FORMAT]
Initializing the built-in memory
or a card
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press e to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
• If you press [MENU/SET] while formatting
the built-in memory, the formatting will
stop halfway. (However, all the pictures
will be deleted.)
• Once the card is formatted, all data
including protected images are
irretrievably erased. Please confi rm that
all data is transferred to your PC before
proceeding with format function.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use batteries with suffi cient power (P24)
or the AC adaptor (DMW-AC6; optional)
when formatting.
• During formatting, do not turn the camera
off.
•
It may take longer to format the built-in
memory than the card. (Max. about 15 sec.)
• Sliding the Write-Protect switch of the SD
Memory Card or the SDHC Memory Card
to [LOCK] prevents formatting. (P16)
• If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
For USA assistance, please call: 1-800-272-7033 or
send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or send e-mail to:
lumixconcierge@ca.panasonic.com
0
Press [ ] to display the [PLAY] mode menu and select the item to set. (P71)
MENU
SET
MENU
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY ?
YES
NO
SELECT SET
84
VQT1C63
Connecting to other equipment
Connecting to a PC
•
By connecting the camera to a computer,
you can upload your pictures, then use the
software on the included CD-ROM ([LUMIX
Simple Viewer] and [PHOTOfunSTUDIO-
viewer-] for Windows
®
) to print or send your
images by e-mail.
• If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
• For details about installing [LUMIX
Simple Viewer] or [PHOTOfunSTUDIO-
viewer-] etc., refer to the separate
operating instructions for PC connection.
A : AC adaptor (DMW-AC6; optional)
•
Use batteries with suffi cient battery power (P24)
or the AC adaptor (DMW-AC6; optional).
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC6; optional).
B : USB connection cable (supplied)
C
: This message appears during data transfer.
D : Check the facing of the connector and
push straight in.
• Set the camera’s mode dial to a mode
other than Print mode [ ].
1 Turn on the camera and the PC.
2 Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [c] mark facing the [q] mark on
the [DIGITAL] socket.
• Hold D and then insert or pull the USB
connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.
[Windows]
The drive appears on the [My Computer]
folder.
• If it is the fi rst time you are connecting
the camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
[Macintosh]
The drive is displayed on the screen.
•
The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
• The drive is displayed as [NO NAME] or
[Untitled] when you connect the camera
with a card inserted.
■ Motion picture playback on a PC
Use “QuickTime” (for Windows 2000/XP) in
the supplied CD-ROM when you play back
motion pictures recorded on this camera
on your PC.
• Download [QuickTime6.5.2 for PC] from
the following website and install it on your
PC when you use Windows98/98SE/Me.
http://www.apple.com/support/quicktime/
• The software is a standard Macintosh
feature.
B
A
C
DIGITAL
V.OUT
DC IN
3V
D
ACCESS
85
VQT1C63
Connecting to other equipment
■ Folder Composition
Folders appear as follows.
1 Folder number
2 File number
3 JPG : Pictures
MOV : Motion pictures
MISC : Folder containing fi les with DPOF
settings.
• This unit stores up to 999 picture fi les in
each folder. A new folder is created after
this maximum is reached.
• To reset fi le and folder numbers, use
[NO.RESET] in the setup menu. (P22)
■ Conditions under which a different
folder number is used
In the following cases, the picture is
not recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
• The folder containing the picture you
just shot had a fi le numbered 999 in it
(example: P1000999.JPG).
• When the card just recorded to contains,
for example, a folder with the number
100 (100_PANA) in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
• You start shooting again after using
[NO.RESET] in the setup menu (P22).
(It is recorded to a new folder that has
a number following on from the one
previous. You can also reset the folder
number to 100 by using [NO.RESET]
immediately after formatting the card
when there are no folders or pictures on
the card.)
■ Connection in the PTP mode
Windows XP/Mac OS X users can
establish connection in the PTP mode by
setting the camera in print mode [ ] and
connecting it to their PC.
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
DCIM
MISC
100_PANA
101_PANA
999_PANA
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
23
• Built-in
memory
• Card
86
VQT1C63
Connecting to other equipment
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed,
do not disconnect the USB connection
cable.
• Data transmission takes time when a
card contains a large number of pictures.
• Motion image fi les in the built-in memory
or on a card in this unit may not play
properly on a computer, so upload them
to your computer for playback.
• If the remaining battery power is
exhausted during communication, the
recorded data may be damaged. When
you connect the camera to the PC, use a
battery with suffi cient battery power (P24)
or the AC adaptor (DMW-AC6; optional).
• If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator
blinks and the alarm beeps. In this case,
stop the communication at once on the
PC.
• When connecting the camera to a
Windows 2000 OS PC with the USB
connection cable, do not replace the
card while the camera and the PC
are connected. The information on
the card may be damaged. Before
changing cards, make sure you do
the necessary steps to safely remove
hardware (double-click the icon in the
task bar in Windows).
• Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P34), multi playback (P67) and calendar
playback (P68).
• Refer to the operating instructions of the
PC, too.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can
edit or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable
to the PC again.
• When you change the mode dial to print
mode [ ] with the camera connected
to the PC, [PLEASE RE-CONNECT THE
PRINTER.] appears on the camera’s
LCD monitor. Before reconnecting the
camera to a printer, change the mode
from [ ] to another one and make sure
that data transmission is not in progress.
([ACCESS] appears on the camera’s
LCD monitor while data transmission is in
progress.)
87
VQT1C63
Connecting to other equipment
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to be printed or start printing
on the LCD monitor. Make the necessary
settings on your printer beforehand. (Read
your printer’s operating instructions.)
1
Turn on the camera and the printer.
2 Set the mode dial to [ ].
• [PLEASE CONNECT TO THE PRINTER]
appears.
3 Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [c] mark facing the [q] mark on
the [DIGITAL] socket.
• Hold C and then insert or pull the USB
connection cable straight.
• Do not use any other USB connection
cables except the supplied one.
• When you connect the camera to a
printer without setting the mode dial to
[ ], remove the cable, set the mode
dial to [ ], turn the camera and the
printer off and on, and connect again.
•
If a card is not inserted when the camera is
connected to the printer, you can print the
picture data on the built-in memory. If a card
is inserted, you can print the picture data on it.
•
You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want to
switch between the built-in memory and the
card, disconnect the USB connection cable,
insert (or remove) the card and then connect
the USB connection cable to the printer again.
•
To print the age in [BABY1]/[BABY2]
and [PET] in scene mode (P47) or the
departure date for [TRAVEL DATE] (P55),
use the software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the CD-
ROM (supplied) and print from the PC. For
information about this, refer to the separate
operating instructions for PC connection.
•
To fi nd out more about PictBridge compliant
printers, contact your local dealer.
■ To connect
A : USB connection cable (supplied)
B : AC adaptor (DMW-AC6; optional)
•
It may take time to print some pictures. Use
batteries with suffi cient battery power (P24)
or the AC adaptor (DMW-AC6; optional)
when you connect to a printer.
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC6; optional).
C : Check the facing of the connector and
push straight in.
A
B
DIGITAL
V.OUT
DC IN
3V
C
88
VQT1C63
Connecting to other equipment
■ Printing the selected picture (making
a single print)
1 Press w/q to select the picture
and then press [MENU/SET].
• A message displays for about 2 seconds.
2 Press e to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
3 Disconnect the USB connection
cable after printing.
■ Selecting multiple pictures for
printing
1 Press e.
2 Press e/r to select an item and
then press [MENU/SET].
Item Setting contents
MULTI
SELECT
Multiple pictures are
selected at once for
printing.
[Operation]
On the plural pictures
screen, press w/q to
select pictures. When
you press r, [ ] is
displayed with the picture
you selected for printing.
(When you press r once
more, the print setting is
canceled.)
Press [MENU/SET] when
you fi nish selection.
SELECT ALL All pictures in the built-in
memory or the card are
printed.
DPOF
PICTURE
Pictures in the [DPOF
PRINT] setting (P77) are
printed.
FAVORITE Pictures set as favorites
(P73) are printed.
• This item appears only
when favorite setting is
[ON].
• You cannot select
any picture when
[FAVORITE] is set to
[ON], but no picture is
marked with [
★].
MENU
SET
PictBridge
MENU
100-0001
1/19
7M
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINTMULTI PRINT
MENU
SET
MENU
PictBridge
MULTI SELECT
SELECT ALL
DPOF PICTURE
FAVORITE
SETSELECT CANCEL
A
MENU
SET
1
MENU
SINGLE SELECT
PRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
SELECT SETCANCEL
A
OFF
89
VQT1C63
Connecting to other equipment
3 Press e to select [PRINT START]
and then press [MENU/SET].
•
In DPOF setting, [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed.
• When you select [DPOF PICTURE],
[DPOF SET] is selectable. When you
select [DPOF SET], refer to P77.
• Press [MENU/SET] when you wish to
cancel printing halfway.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], the print
confi rmation screen appears. Select
[YES] and perform printing.
• When the number of prints exceeds
1,000, [PRINTING --- PICTURES DO
YOU WANT TO PROCEED?] appears on
the print confi rmation screen.
4 Disconnect the USB connection
cable after printing.
■ Setting date printing, the number of
prints, the paper size and the page
layout
• Select an item to set on the screen for
step 2 in “Printing the selected picture
(making a single print)” (P88) or on the
screen for step 3 in “Selecting multiple
pictures for printing” (P88, 89).
• When you want to print pictures in
a paper size or a layout which is not
supported by the camera, set [PAPER
SIZE] and [PAGE LAYOUT] to [
F] and
then set the paper size or the layout
on the printer. (For details, refer to the
operating instructions of the printer.)
• [PRINT WITH DATE]
OFF Date is not printed.
ON Date is printed.
• If the printer does not support date
printing, the date cannot be printed on
the picture.
• [NUM. OF PRINTS]
Set the number of prints.
• You can set up to 999 prints.
• [PAPER SIZE]
(Possible paper sizes on the camera)
The items are listed on 1/2 and 2/2.
Press r to select the desired item.
1/2
F
Settings on the printer are
prioritized.
L/3.5˝ × 5˝ 89 mm × 127 mm
2L/5˝ × 7˝ 127 mm × 178 mm
POSTCARD 100 mm × 148 mm
A4 210 mm × 297 mm
2/2*
CARD SIZE 54 mm × 85.6 mm
10 × 15cm 100 mm × 150 mm
4˝ × 6˝ 101.6 mm × 152.4 mm
8˝ × 10˝ 203.2 mm × 254 mm
LETTER 216 mm × 279.4 mm
* These items cannot be displayed when
the printer does not support the paper
sizes.
MENU
SET
1
MENU
MULTI SELECT
PRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
SELECT SETCANCEL
A
OFF
90
VQT1C63
Connecting to other equipment
• [PAGE LAYOUT]
(Possible layouts on the camera)
F
Settings on the printer are
prioritized.
G
1 page with no frame print
H
1 page with frame print
I
2 pages print
J
4 pages print
• An item cannot be selected if the
printer does not support the page
layout.
■ Layout printing
• When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [J] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
• When printing different pictures on 1
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper,
set [PAGE LAYOUT] to 4-picture printing
[J] and then set [NUM. OF PRINTS]
for the pictures to 1.
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [K] is indicated.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks
and the alarm beeps. If this happens
during printing, press [MENU/SET] and
stop printing at once. If not printing,
disconnect the USB connection cable.
• The camera is receiving an error
message from the printer when the [*]
indication lights orange during printing.
After fi nishing printing, make sure there
are no problems with the printer.
• If the total number of ordered prints or
the number of pictures set for print is
large, printing is performed at intervals.
In such cases, the number of remaining
prints shown on the display will differ
from the number of prints you set. The
discrepancy, however, does not indicate
an error.
• Date print function on the printer may
have priority over the same settings on
the camera. Check the setting on the
printer as well.
• When the mode dial is set to a choice
other than print mode [ ], [USB MODE
CHANGED. PLEASE REMOVE THE
USB CABLE.] appears on the camera’s
LCD monitor. Set the mode dial back
to [ ] before disconnecting the USB
connection cable. Disconnect the USB
connection cable after canceling printing.
• When you want to print pictures with
date, the [DATE STAMP] function (P75)
is also useful. Note that if you use date
stamp and then specify printing the
date when you order prints or on a
printer, both dates will be printed and
may overlap.
91
VQT1C63
Connecting to other equipment
Playing Back Pictures with a TV Screen
■ Playing back pictures with the
supplied cable
• Set the [TV ASPECT]. (P23)
• Turn the camera and the TV off.
1 Connect the video cable A
(supplied) to the [V. OUT] socket
of the camera.
• Connect the video cable with the [c]
mark facing the [q] mark on the [V. OUT]
socket.
• Hold B and then insert or pull the video
cable straight.
2 Connect the video cable to the
video input socket of the TV.
3 Turn the TV on and select
external input.
4 Turn the camera on.
• Do not use any other Video cables
except the supplied one.
• The top and bottom or left and right of the
picture may be cut off slightly when it is
displayed due to the characteristics of the
TV.
• Depending on the screen mode setting of
the TV when you connect the camera to
a wide-screen TV or a high-defi nition TV,
the picture may be stretched horizontally
or vertically and the top and bottom and
or left and right of the picture may be
cut off when it is displayed. In this case,
change the screen mode setting.
• Read the TV operating instructions too.
• Pictures might be slightly blurred if you
show them vertically on a television.
• You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set [VIDEO
OUT] in the [SETUP] menu. Even if you
set [VIDEO OUT] to [PAL], the output
signal will still be NTSC in the recording
mode.
■ Playback pictures on TV with SD
Memory Card slot
You can put your SD Memory Card in a
television with an SD Memory Card slot to
show still images.
•
Depending on the television, some pictures
may not take up the whole screen.
•
You cannot play motion pictures. To play
back motion pictures, connect the camera
to the TV with the video cable (supplied).
• You may be unable to play MultiMedia
Cards.
A
DIGITAL
V.OUT
DC IN
3V
B
92
VQT1C63
Others
Screen Display
The LCD monitor shows the status of the camera.
■ In recording
1 Recording mode
2 Flash mode (P40)
3 AF area (P25)
4 Focus indication (P25)
5 Picture size (P62)
6 Quality (P62)
Jitter alert indication (P27) : 6
7 Battery indication (P24)
8 Remaining number of recordable
pictures
9 : Built-in memory (P16)
: Card (P16)
10 Recording indication
11 Shutter speed indication (P25)
12 Aperture value indication (P25)
13 Optical image stabilizer (P64)
14 Burst (P65)
15 White balance (P60)
16 Sensitivity (P61)
: ISO limit (P45)
17 Color mode (P66)
18 In Motion picture mode (P53) :
[]
/
[]
/
[]
/
[]
(4:3)
[]
/
[ ] (16:9)
19 Available recording time in Motion
picture mode
e.g. :
20 Histogram (P38)
21 Age (P50)
• It is displayed about 5 seconds when
switching to [BABY] or [PET] in scene
mode.
Number of days that have passed since
the departure date (P55)
22 Travel date (P55)
23 Elapsed recording time (P53)
24 Current date and time/Destination
settings : (P57)
• It is displayed for about 5 seconds
when turning the camera on, setting
the clock and after switching from
the playback mode to the recording
mode.
Zoom (P30)/Extended optical zoom
(P30)/Easy zoom (P31)/Digital zoom
(P32) :
25 Intelligent ISO (P45)
26 Exposure compensation (P44)
27 High angle mode (P39)
28 Self-timer (P43)
29 AF assist lamp (P66)
30fps
QVGA
30fps
VGA
10fps
VGA
30fps
16:9
10fps
16:9
10fps
QVGA
R 1h 20m 30s
W
T
1X
W
In normal picture mode [ ]
(Initial setting)
In recording (After settings)
1
19
7M
F2.8 1/30
5s
30fps
VGA
ISO
12 3 4
1112
8
9
567
13
14 15 16
27
26
28
19
20
22
23
17 18
29
24
21
10
25
100
ISO
NATURAL R15s
93
VQT1C63
Others
■ In simple mode
1 Flash mode (P40)
2 Focus indication (P25)
3 Picture mode (P28)
6 : Jitter alert indication (P27)
4 Battery indication (P24)
5 Remaining number of recordable
pictures
6 : Built-in memory (P16)
: Card (P16)
7 Recording indication
8 AF area (P25)
9 Travel date (P55)
10 Backlight compensation operation
(P29)
11 Current date and time
It is displayed about 5 seconds then
turning the camera on, setting the clock
and after switching from the playback
mode to the recording mode.
Zoom (P30)/Extended optical zoom
(P30)/Easy zoom (P31)
12 Number of days that have passed since
the departure date (P55)
13 Backlight compensation (P29)
14 Self-timer (P43)
15 AF assist lamp (P66)
■ In Playback
1 Playback mode (P34)
2 Number of DPOF prints (P77)
3 Protected picture (P79)
4 Picture size (P62)
5 Quality (P62)
In Motion picture mode (P53) :
[]
/
[]
/
[]
/
[]
(4:3)
[]
/
[]
(16:9)
In simple mode (P28):
: ENLARGE
: 4˝ × 6˝/10 × 15 cm
: E-MAIL
6 Battery indication (P24)
7 Folder/File number (P85)
: Built-in memory (P16)
: Card (P16)
8 Picture number/Total pictures
9 Cable disconnection warning icon
(P90)
Motion picture recording time (P70) :
10 Histogram (P38)
11 Recording information
12 Favorites setting (P73)/
Elapsed playback time (P70) :
13 Recorded date and time
14 Destination settings (P57)
15 Age display (P50)
16 Number of days that have passed since
the departure date (P55)
17 Motion picture playback (P70)
18 Date stamp complete indicator (P76)
19 Favorites indicator (P73)
In Simple mode In Playback
30fps
QVGA
30fps
VGA
10fps
VGA
10fps
QVGA
1h 20m 30s
1h 20m 30s
W
T
1X
W
30fps
16:9
10fps
16:9
100-0001
200
ISO
1
7M
1/19
F2.8 1/100
19
AWB
13
12 3
14
15
7
8
9
10
11
12
4 5 6
17
1234
13
11
14
5
6
7
8
12
9
15
10
18
16
19
PLAY MOTION
10 00 DEC 1 2007
BACKLIGHT
PICTURE
1ST DAY
94
VQT1C63
Others
Cautions for Use
■ Optimal Use of the Camera
Take care not to drop or
knock the unit or put a lot
of pressure on it.
• Do not leave the unit in
your pants pocket when
you sit down or forcefully
insert it into a full bag etc.
• Take care not to drop or
knock the bag that you
inserted the unit in as it
may strongly shock the unit.
• A strong shock may break the lens,
screen or outer case and cause the
camera to malfunction.
Keep the camera as far away as
possible from electromagnetic
equipment (such as microwave ovens,
TVs, video games etc.).
• If you use the camera on top of or near
a TV, the pictures on the camera may
be disrupted by electromagnetic wave
radiation.
• Do not use the camera near cell phones
because doing so may result in noise
adversely affecting the pictures.
• Recorded data may be damaged, or
pictures may be distorted, by strong
magnetic fi elds created by speakers or
large motors.
• Electromagnetic wave radiation
generated by microprocessors may
adversely affect the camera, disturbing
the pictures.
• If the camera is adversely affected by
electromagnetic equipment and stops
functioning properly, turn the camera off
and remove the battery or disconnect
AC adaptor (DMW-AC6; optional). Then
reinsert the battery or reconnect AC
adaptor and turn the camera on.
Do not use the camera near radio
transmitters or high-voltage lines.
• If you record near radio transmitters or
high-voltage lines, the recorded pictures
may be adversely affected.
Make sure to use the supplied cords
and cables. If you use optional
accessories, use the cords and the
cables supplied with them. Do not
extend the cords and the cables.
Do not spray insecticides or volatile
chemicals onto the camera.
• If the camera is sprayed with such
chemicals, the camera body may be
damaged and the surface fi nish may peel
off.
• Do not keep rubber or plastic products in
contact with the camera for a long period
of time.
Do not use benzine, thinner or alcohol
for cleaning the camera.
• Before cleaning the camera, remove the
batteries or disconnect the AC adaptor
(DMW-AC6; optional) from the electrical
outlet.
• The camera body may be deformed and
the surface fi nish may peel off.
• Wipe the dust or fi ngerprints with a soft,
dry cloth. To remove stubborn stains,
soak a dry cloth in water and then use it
to wipe the dirt. Then wipe again with a
dry cloth.
• Do not use a kitchen detergent or a
chemically treated cloth.
• In case rain or other sources of water
splash onto the camera, wipe it with a dry
cloth.
95
VQT1C63
Others
■ Batteries
Be sure to remove the batteries when
you will not be using the camera for a
long period of time.
• If the temperature is too high or low,
the terminals may rust causing a
malfunction.
If you drop the batteries accidentally,
check to see if the body of the batteries
and the terminals are damaged.
• Inserting a damaged battery in the
camera will damage the camera.
Bring charged spare batteries when
going out.
• Be aware that the operating time of
the batteries becomes shorter in low
temperature conditions such as at a ski
resort.
Dispose of unusable batteries.
• Batteries have a limited life.
• Do not throw batteries into fi re because
they may cause an explosion.
• Unusable batteries should be discarded
in accordance with battery recycling laws.
Call the RBRC hotline on 1-800-822-
8837 for information.
Do not allow battery terminals to come
into contact with metal objects (such as
necklaces, hairpins, etc.).
• This can cause short circuiting or heat
generation and you may be badly burned
if you touch the batteries.
■ Card
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated.
Do not bend or drop the card.
• The card may be damaged or the
recorded content may be damaged or
erased.
• Store the card in the card case or the
storage bag after use and when you
store or carry the card.
• Do not allow dirt, dust or water to enter
the terminals on the back of the card
and do not touch the terminals with your
fi ngers.
96
VQT1C63
Others
Message Display
Confi rmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE]/[CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
This message is displayed the fi rst time
you insert batteries and when the batteries
are exhausted and you replace them. If the
battery type being used is different from
the one indicated in the message, change
the battery type in [BATTERY TYPE] in the
[SETUP] menu. (P21)
[THIS MEMORY CARD IS LOCKED]
Cancel the card lock. (P16, 79)
[NO VALID PICTURE TO PLAY]
Play back after recording or after inserting
a card with a recorded picture.
[THIS PICTURE IS PROTECTED]
After canceling the protect setting (P79),
you can delete or overwrite the picture.
[THIS PICTURE CANNOT BE DELETED]/
[SOME PICTURES CANNOT BE
DELETED]
The pictures not based on the DCF
standard cannot be deleted.
To delete this kind of picture, fi rst save
your data to your computer, then use this
unit to reformat the card. (P83)
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have selected more than the allowed
number of items in multi delete or the
MULTI setting in [DATE STAMP]. Repeat
the procedure as necessary.
You have placed more than 999 pictures in
your favorites list.
[CANNOT BE SET ON THIS PICTURE]/
[CANNOT BE SET ON SOME PICTURES]
The DPOF setting cannot be set to the
following pictures.
• Pictures not based on the DCF.
[NOT ENOUGH SPACE ON BUILT-IN
MEMORY]/[NOT ENOUGH MEMORY ON
THE CARD]
There is no space left on the built-in
memory or the card.
• When you copy pictures from the built-
in memory to the card (batch copy), the
pictures are copied until the capacity of
the card becomes full.
[SOME PICTURES CANNOT BE
COPIED]/[COPY COULD NOT BE
COMPLETED]
The following pictures cannot be copied.
• When a picture with the same name as
the picture to be copied exists in the copy
destination.
• Files not based on the DCF standard.
Moreover, pictures recorded or edited by
other equipment may not be copied.
[BUILT-IN MEMORY ERROR FORMAT
BUILT-IN MEMORY?]
This message will be displayed when you
format the built-in memory on the PC or
remove the battery without turning the
camera off. Format the built-in memory of
the camera again. (P83) The data on the
built-in memory will be deleted.
97
VQT1C63
Others
[MEMORY CARD ERROR FORMAT THIS
CARD?]
The format of the card cannot be
recognized by this camera. Format the
card again with this camera.
Save your data to your computer, then use
this unit to reformat the card. (P83)
[PLEASE TURN CAMERA OFF AND
THEN ON AGAIN]
This message appears when the camera
is not operating properly. Turn the camera
off and on. If the message persists, contact
the dealer or your nearest Service Center.
[MEMORY CARD ERROR
MEMORY CARD PARAMETER ERROR]
Use a card compatible with this camera.
(P5, 16)
You can only use 4 GB cards if they are
SDHC Memory Cards.
[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
• Failed access to the card.
Insert the card again.
[READ ERROR
PLEASE CHECK THE CARD]
Data reading error.
Insert the card again. Make sure the card is
inserted properly and then play back again.
[WRITE ERROR
PLEASE CHECK THE CARD]
Data writing error.
Turn the camera off and remove the card.
Then insert the card and turn the camera
on again. This error may also indicate that
the card is damaged.
[MOTION RECORDING WAS CANCELLED
DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•
When you set the [PICT.MODE] to
[30fpsVGA] or [30fps16:9], we recommend
using cards that offer 10 MB/second or
higher speeds (shown on their packages
and elsewhere) for best results.
•
Depending on the type of Card, recording
may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there
are no remaining folder numbers that can
be used. (P85)
Save your data to your computer, then use
this unit to reformat the card. (P83)
If you execute [NO.RESET] in the [SETUP]
menu after formatting, the folder number is
reset to 100. (P22)
[PICTURE IS DISPLAYED FOR 4:3 TV]/
[PICTURE IS DISPLAYED FOR 16:9 TV]
• The video cable is connected to the
camera. Press [MENU/SET] if you want
to delete this message at once.
• Select [TV ASPECT] in the [SETUP]
menu to change the TV aspect. (P23)
• This message also appears when the
USB connection cable is connected to
the camera only.
In this case, connect the other end of
the USB connection cable to a PC or a
printer. (P84, 87)
[PLEASE RE-CONNECT THE PRINTER.]
This message appears if you change the
mode dial to [ ] while the camera and
the PC are connected. Set the camera to a
mode other than [ ] mode, check that no
data is being transferred and then connect
to the printer again. ([ACCESS] appears
on the LCD monitor of the camera while
data is being transferred.)
[USB MODE CHANGED. PLEASE
REMOVE THE USB CABLE.]
This message appears if you change the
mode dial to a mode other than [ ] while
the camera and the printer are connected.
Set the mode dial to [ ] again and then
disconnect the USB connection cable. If
this happens during printing, stop printing
and then disconnect the USB connection
cable.
98
VQT1C63
Others
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be
improved. Carry out the [RESET] in the setup menu. (P23)
■ Batteries and power supply
Conditions Causes
The camera turns off
immediately even when
battery power is full.
The remaining battery power may not be displayed
accurately, and the camera may suddenly stop working, when
the type of battery and the settings on [BATTERY TYPE] are
not identical. However this is not a malfunction. Depending
on the battery brand and the operating temperature, or if
exhausted batteries are used, the remaining battery power
may not be displayed accurately.
Please check [BATTERY TYPE] (P21) in the [SETUP] menu.
The remaining battery
power is low even if new
batteries are inserted.
The camera will not turn
on.
Are the batteries inserted correctly?
Use suffi ciently charged batteries when using Ni-MH
batteries.
The picture is not
displayed on the LCD
monitor.
Is the power save mode (P21) or economy mode (P22)
activated? Press the shutter button halfway to deactivate
these modes.
Are the batteries exhausted? Replace them with batteries
which have suffi cient capacity. (When you use Ni-MH
batteries, charge them.)
The camera turns off
soon after turning it on.
• Are the batteries exhausted? Replace them with batteries
which have suffi cient capacity. (When you use Ni-MH
batteries, charge them.)
• If you leave the camera on, the battery will be exhausted.
Turn the camera off frequently by using power save mode
(P21) or economy mode (P22) etc.
■ Shooting
Conditions Causes
The picture cannot be
recorded.
Is the mode dial correctly set?
Is there any memory capacity left on the built-in memory or
the card?
Before recording, delete some pictures. (P35)
The recorded pictures
are pale.
There is dirt on the lens.
The picture can become whitish if there is dirt e.g. fi ngerprints
on the lens. If the lens is dirty, turn on the camera, eject the
lens barrel (P9) and gently wipe the lens surface with a soft
dry cloth.
The recorded picture is
too bright or dark.
Check that the exposure is correctly compensated. (P44)
99
VQT1C63
Others
Conditions Causes
The subject is not
focused properly.
The focus range varies depending on the recording mode.
To set the proper mode for the distance to the subject, rotate
the mode dial.
Is the subject out of the focus range? (P25, 46)
Have you taken a picture with jitter?
Sometimes two or three
pictures are taken with
a single press of the
shutter button.
Is the camera set in burst mode (P65)?
The recorded picture
is blurred. The optical
image stabilizer is not
effective.
When taking a picture in shaded areas or indoors, the shutter
speed becomes slow and the Optical Image Stabilizer
function may not work properly. In this case, we recommend
holding the camera with both hands fi rmly to take pictures
(P25).
Images are grainy or
noisy.
Is the ISO sensitivity high or the shutter speed slow?
(When set to [AUTO], ISO sensitivity increases for indoor and
other shooting occasions.)
• Reduce ISO sensitivity. (P61)
• Set [COL.MODE] to [NATURAL]. (P66)
• Improve the ambient light.
In [HIGH SENS.] (P51) in scene mode, the resolution of
the recorded picture decreases slightly because of high
sensitivity processing. This is not a malfunction.
The brightness or color
of the picture differs
from the actual scene.
Brightness and colors may change when using a fast shutter
speed under fl uorescent lights, but this is a characteristic of
such lighting and is not a malfunction.
Shooting of motion
pictures stops
unexpectedly.
This camera is not compatible with motion picture recording
on MultiMediaCards.
• When you set the [PICT.MODE] to [30fpsVGA] or
[30fps16:9], we recommend using cards that offer 10
MB/second or higher speeds (shown on their packages and
elsewhere) for best results.
• Depending on the type of SD Memory Card or SDHC
Memory Card, recording may stop in the middle.
A reddish vertical line
appears on the LCD
monitor while the shutter
button is pressed
halfway or recording
motion pictures.
This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Black or green vertical lines or horizontal
irregularities may also appear around
the smear, but this is not a malfunction.
It is recorded in motion pictures but is
not recorded on still pictures.
100
VQT1C63
Others
■ LCD
Conditions Causes
The LCD monitor
sometimes turns off
although the camera is
turned on.
Is the LCD monitor turned off soon after you take pictures
with the fl ash? While the fl ash is being charged, the LCD
monitor is turned off.
The brightness of the
LCD monitor becomes
dark or bright for a
moment.
This phenomenon appears when pressing the shutter button
halfway to set the aperture value and does not affect the
recorded pictures.
The LCD monitor fl ickers
indoors.
The LCD monitor may fl icker for a few seconds after turning
the camera on indoors under fl uorescent light.
This is not a malfunction.
The LCD monitor is too
bright or dark.
Adjust the brightness of the LCD monitor. (P22)
Is the high angle mode activated? (P39)
Black, red, blue and
green dots appear on the
LCD monitor.
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the
LCD monitor.
In dark places, noise may appear to maintain the brightness
of the LCD monitor. This does not affect the pictures you are
recording.
■ Flash
Conditions Causes
Flash is not activated. Is the fl ash setting set to Forced OFF [v]?
Change the fl ash setting. (P40)
The fl ash is not activated when motion picture mode [i],
[SCENERY], [NIGHT SCENERY], [SUNSET], [HIGH SENS.],
[STARRY SKY], [FIREWORKS] or [AERIAL PHOTO] in
scene mode (P47) is selected.
The fl ash is activated 2
times.
When you select red-eye reduction (P40), the fl ash is
activated once before the actual recording to reduce the red-
eye phenomenon (eyes of the subject appearing red in the
picture) and then activated again for the actual recording.
101
VQT1C63
Others
■ Playback
Conditions Causes
Pictures rotate
unexpectedly.
One of the features of this unit can automatically detect when
you have turned the camera side on to take a picture, then
rotate that picture for you when you play it back.
In some cases, the unit may detect that you have turned the
camera sideways, when in fact you are facing it up or down.
• Set [ROTATE DISP.] (P74) to [OFF] so that the camera
does not rotate these kinds of pictures for you.
• You can use [ROTATE] (P74) to rotate the pictures when
necessary.
The picture is not played
back.
Is the mode dial set to playback [
Q]?
Is there a picture on the built-in memory or the card?
• The pictures on the built-in memory appear when a card is
not inserted. The picture data on the card appears when a
card is inserted. (P16)
Folder or fi le number
appears as [-] and the
display goes black.
The picture may have been changed on a computer or taken
on a different manufacturer’s camera.
This problem can also occur if you remove the batteries
immediately after taking a picture or if the batteries had very
little charge left.
• You will need to reformat the card to delete this type of
picture. (P83) (Remember that all data will be irretrievably
erased when you format the card, so save your data and
check the card before proceeding.)
The picture is displayed
with a date different from
the actual recording date
in calendar playback.
Was the picture edited with a PC or recorded with a digital
camera from another manufacturer?
This kind of picture may be displayed with a date different
from the actual recording date in calendar playback. (P68)
Is the clock in the camera set properly? (P17)
For example, if the clock setting on the camera is different
from the date and time set on the PC and you acquire
pictures recorded with the camera to the PC and then write
them back to the card, the pictures may be displayed with
dates different from the actual recording dates in calendar
playback etc.
■ Connecting to a TV, computer or printer
Conditions Causes
The picture does not
appear on the television.
The TV screen is
disturbed or displayed in
monochrome.
Is the camera connected to the TV correctly?
Set the TV to video input mode.
102
VQT1C63
Others
Conditions Causes
The display areas on
the TV screen and the
camera’s LCD monitor
are different.
Depending on the TV model, the area display may be smaller
so the picture may be stretched horizontally or vertically and
the top and bottom or left and right of the picture may be cut
off when it is displayed. This is due to the TV specifi cations
and is not a malfunction.
Cannot play motion
pictures on a television.
You cannot play motion pictures if you have inserted the card
into a card slot on a television.
Connect the camera to the television with the included video
cable and play the pictures on this unit. (P91)
The picture size does not
fi t the TV screen.
Check the [TV ASPECT] setting on this unit. (P23)
Cannot upload pictures
to your computer.
Check the connections.
Check that the computer has correctly recognized the
camera.
Set the camera’s mode dial to a mode other than Print mode
(P84).
The computer does not
recognize the card.
(The built-in memory is
recognized.)
Disconnect the USB connection cable, then insert the card
and reconnect the cable.
The pictures cannot be
printed with printers.
Does the printer support PictBridge? You cannot print
pictures with printers which do not support PictBridge. (P87)
Set the camera’s mode dial to Print mode (P87).
The sides of printed
images are cut off.
• If your printer has trimming and border settings, change the
settings so that there is no trimming and no border. (Read
your printer’s operating instructions.)
• Some photography shops can handle pictures shot in the
[
j] aspect ratio (P62). Enquire before sending them for
printing.
■ Others
Conditions Causes
Unreadable language
was selected by mistake.
Press [MENU/SET], select the [SETUP] menu icon [ ] and
then select the [{] icon to set the desired language. (P23)
Cannot change the auto
review setting.
You cannot change the auto review setting when using burst
mode or shooting motion pictures.
When the shutter button
is pressed halfway,
a red lamp turns on
sometimes.
In dark places, the AF assist lamp (P66) lights red to make it
easier to focus on a subject.
103
VQT1C63
Others
Conditions Causes
The AF assist lamp does
not turn on.
Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]?
(P66)
Are you taking pictures in dark places? The AF assist lamp
does not turn on in bright places.
The AF assist lamp does not turn on when [SCENERY],
[NIGHT SCENERY], [SUNSET], [FIREWORKS] or [AERIAL
PHOTO] in scene mode (P47) is selected.
The camera gets hot. The camera may get a little warm while you are using it, but
this is normal.
The lens clicks. When brightness has changed due to the zoom or the
movement of the camera or other, the lens may click and the
picture on the screen may be drastically changed, however,
the pictures are not affected.
The sound is caused by automatic adjustment of the
aperture. It is not a malfunction.
The clock setting is
reset.
If you do not use the camera for a long time, the clock setting
may be reset. When the message [PLEASE SET THE
CLOCK] appears, set the clock again. (P17)
When you take a picture before setting the clock, [0:00 0. 0.
0] is recorded.
Images appear slightly
distorted.
Images may be taken with some distortion depending on the
zoom ratio. This distortion increases as you get nearer the
subject, but it is not a malfunction.
Strange colors appear
around the edge of the
image.
Depending on the zoom magnifi cation, the picture may
have some colored fringes around the subject. This is
called chromatic aberration and may be more visible when
recording distant subjects. However this is not a malfunction.
File numbers are not
created in order.
Certain operations cause pictures to be saved in folders with
different numbers. (P85)
The fi le numbers are
recorded in ascending
order.
If the batteries are inserted or removed when the camera is
not turned off, the recorded folder numbers are lost.
However if you turn the camera on again and record pictures,
the fi le numbers may be recorded in ascending order.
The picture is displayed
black.
Pictures edited or rotated with a PC may be displayed in
black in playback mode (P34), multi playback (P67) and
calender playback (P68).
104
VQT1C63
Others
Number of recordable pictures and available
recording time
• The number of recordable pictures and the available recording time are an
approximation. (These vary depending on the recording conditions and the type of card.)
• The number of recordable pictures and the available recording time vary depending on
the subjects.
• The numbers inside the thick black line are the number of recordable pictures in simple
mode [ ]. (P28)
■ Number of recordable pictures
Aspect ratio
h
Picture size
DMC-LS75/DMC-LS70
/ : 7M (3072 × 2304 pixels)
DMC-LS60 only
/ : 6M (2816 × 2112 pixels)
Quality
G/
H
G
/
H
Built-in Memory
(Approx. 27 MB)
714817
Card
16 MB 3 7 4 8
32 MB 7 16 9 19
64 MB 16 34 20 40
128 MB 35 69 41 82
256 MB 68 135 81 160
512 MB 135 270 160 320
1 GB 270 540 320 640
2 GB 550 1090 660 1270
4 GB 1090 2150 1290 2510
Aspect ratio
h
Picture size
DMC-LS75/DMC-LS70
: 5M EZ (2560 × 1920 pixels)
: 3M EZ (2048 × 1536 pixels)
Quality
GHGH
Built-in Memory
(Approx. 27 MB)
10 21 16 33
Card
16 MB 5 10 8 16
32 MB 11 23 18 36
64 MB 24 48 38 75
128 MB 50 99 78 150
256 MB 98 190 150 290
512 MB 195 380 300 590
1 GB 390 770 600 1180
2 GB 790 1530 1220 2360
4 GB 1560 3010 2410 4640
5M
3M
7M
6M
105
VQT1C63
Others
Aspect ratio
h
Picture size
: 2M EZ
(1600 × 1200 pixels)
: 1M EZ
(1280 × 960 pixels)
/ : 0.3M EZ
(640 × 480 pixels)
Quality
GHGHG
H
/
Built-in Memory
(Approx. 27 MB)
27 53 41 78 130 210
Card
16 MB 13 27 21 40 68 110
32 MB 29 58 45 85 145 230
64 MB 61 120 93 175 290 480
128 MB 125 240 190 350 600 970
256 MB 240 470 370 690 1170 1900
512 MB 480 940 730 1370 2320 3770
1 GB 970 1880 1470 2740 4640 7550
2 GB 1920 3610 2920 5120 8780 12290
4 GB 3770 7090 5740 10050 17240 24130
Aspect ratio
Picture size
DMC-LS75/DMC-LS70
: 6M
(3072 × 2048 pixels)
DMC-LS60 only
: 5M
(2816 × 1880 pixels)
/ : 2.5M EZ
(2048 × 1360 pixels)
Quality
GHGHG
H
/
Built-in Memory
(Approx. 27 MB)
8 16 9 19 19 37
Card
16 MB 3 8 4 10 9 18
32 MB 8 18 10 21 20 40
64 MB 19 38 22 45 43 83
128 MB 39 78 46 92 88 165
256 MB 77 150 91 180 170 330
512 MB 150 300 180 350 340 650
1 GB 300 600 360 710 680 1310
2 GB 620 1220 730 1420 1360 2560
4 GB 1230 2410 1450 2800 2680 5020
Aspect ratio
j
Picture size
DMC-LS75/DMC-LS70
: 5.5M
(3072 × 1728 pixels)
DMC-LS60 only
: 4.5M
(2816 × 1584 pixels)
: 2M EZ
(1920 × 1080 pixels)
Quality
GHGHGH
Built-in Memory
(Approx. 27 MB)
9 1911232548
Card
16 MB 4 10 5 11 12 25
32 MB 10 21 12 25 27 53
64 MB 22 45 27 53 57 105
128 MB 46 92 55 105 115 220
256 MB 91 180 105 210 230 430
512 MB 180 350 210 420 450 860
1 GB 360 710 430 850 910 1720
2 GB 730 1420 870 1700 1800 3410
4 GB 1450 2800 1720 3350 3540 6700
2.5M
6M
2M
5.5M 4.5M
5M
2M
1M
0.3M
106
VQT1C63
Others
■ Available recording time (In Motion picture mode)
Picture quality
setting
30fps
VGA
10fps
VGA
30fps
QVGA
10fps
QVGA
30fps
16:9
10fps
16:9
Built-in Memory
(Approx. 27 MB)
— — 53 s
2 min
40 s
——
Card
16 MB 6 s 26 s 26 s
1 min
23 s
5 s 22 s
32 MB 17 s 59 s 59 s
2 min
55 s
14 s 50 s
64 MB 39 s 2 min 2 min 6 min 33 s
1 min
46 s
128 MB
1 min
23 s
4 min
10 s
4 min
10 s
12 min
20 s
1 min
11 s
3 min
35 s
256 MB
2 min
45 s
8 min
10 s
8 min
10 s
24 min
2 min
20 s
7 min
512 MB
5 min
30 s
16 min
20 s
16 min
20 s
47 min
50 s
4 min
40 s
14 min
1 GB 11 min
32 min
50 s
32 min
50 s
1 h
35 min
9 min
20 s
28 min
10 s
2 GB
22 min
30 s
1 h
7 min
1 h
7 min
3 h
15 min
19 min
20 s
57 min
30 s
*4 GB
44 min
20 s
2 h
11 min
2 h
11 min
6 h
22 min
38 min
1 h
53 min
* The volume of motion picture is limited to 2 GB per recording session. The maximum
available recording time for up to 2 GB only is displayed on the screen.
• The number of recordable pictures and the available recording time displayed on the
LCD monitor may not decrease in order.
• This unit does not support recording motion pictures on MultiMediaCards.
• The extended optical zoom does not work in [HIGH SENS.] (P51) in scene mode so the
picture size for [EZ] is not displayed.
107
VQT1C63
Others
Specifi cations
Digital Camera: Information for your safety
Power Source: DC 3 V
Power Consumption: DMC-LS75/DMC-LS70: 1.5 W (When recording)
DMC-LS60: 1.4 W (When recording)
0.6 W (When playing back)
Camera Effective pixels: DMC-LS75/DMC-LS70: 7,200,000 pixels
DMC-LS60: 6,000,000 pixels
Image sensor: 1/2.5˝ CCD
Total pixels DMC-LS75/DMC-LS70: 7,380,000 pixels
DMC-LS60: 6,370,000 pixels
Primary color fi lter
Lens: Optical 3 × zoom, f=5.8 to 17.4 mm [35 mm fi lm camera
equivalent: 35 to 105 mm] /F2.8 to F5.0
Digital zoom: Max. 4 ×
Extended optical zoom: DMC-LS75/DMC-LS70 : max 4.5 × (When recording
resolution is or less)
DMC-LS60 : max 4.1 × (When recording resolution is
or less)
Focus: Normal/Macro (Mode dial)
5-area-focusing/1-area-focusing (high speed)/1-area-
focusing
Focus range: Normal :
50 cm (1.64 feet) to
Z
Macro/Simple/Intelligent ISO/Motion picture:
5 cm (0.16 feet) (Wide)/ 30 cm (0.98 feet) (Tele) to
Z
Scene mode: settings may be different to those shown
above
Shutter system: Electronic shutter+Mechanical shutter
Motion picture recording: Aspect ratio [
h]:
640 × 480 pixels (When a card is used.)/ 320 × 240 pixels
Aspect ratio [j]:
848 × 480 pixels (When a card is used.)
30 or 10 frames/second without audio
Burst recording
Burst speed: Depends on the type of card, the recording resolution, and
picture quality
Number of recordable
pictures: Depends on the remaining capacity of the Built-in memory or
the card. (unlimited)
3M
3M
108
VQT1C63
Others
ISO sensitivity: AUTO/
100/200/400/800/1250
[HIGH SENS.] mode: 3200
Shutter speed: 8 seconds to 1/2,000th of a second
[STARRY SKY] mode:15 seconds, 30 seconds, 60 seconds
Motion picture mode:1/30th of a second to 1/6,400th of a
second
White balance: Auto white balance/Daylight/Cloudy/Shade/Halogen/White
set
Exposure (AE): Program AE
Exposure compensation (1/3 EV Step, -2 EV to +2 EV)
Metering mode: Multiple
LCD monitor: Amorphous silicon active TFT LCD
DMC-LS75: 2.5˝ (Approx. 115,200 pixels) (fi eld of view ratio
about 100%)
DMC-LS70/DMC-LS60: 2.0˝ (Approx. 86,400 pixels) (fi eld of
view ratio about 100%)
Flash: Flash range: (ISO AUTO)
Approx. 30 cm (0.98 feet) to 4.7 m (15.42 feet) (Wide [ISO
AUTO] mode)
AUTO, AUTO/Red-eye reduction, Forced ON (Forced ON/
Red-eye reduction), Slow sync./Red-eye reduction, Forced
OFF
Recording media: Built-in Memory (Approx. 27 MB)/SD Memory Card/SDHC
Memory Card/MultiMediaCard (Still pictures only)
Picture size:
Still picture: Aspect ratio [
h]:
3072 × 2304 pixels (DMC-LS75/DMC-LS70), 2816 × 2112
pixels (DMC-LS60 only), 2560 × 1920 pixels (DMC-LS75/
DMC-LS70), 2048 × 1536 pixels, 1600 × 1200 pixels, 1280 ×
960 pixels, 640 × 480 pixels
Aspect ratio [ ]:
3072 × 2048 pixels (DMC-LS75/DMC-LS70), 2816 × 1880
pixels (DMC-LS60 only), 2048 × 1360 pixels
Aspect ratio [j]:
3072 × 1728 pixels (DMC-LS75/DMC-LS70), 2816 × 1584
pixels (DMC-LS60 only), 1920 × 1080 pixels
Motion picture: Aspect ratio [h]:
640 × 480 pixels(Only when using an SD Memory card/
SDHC Memory Card), 320 × 240 pixels
Aspect ratio [j]:
848 × 480 pixels(Only when using an SD Memory card/
SDHC Memory Card)
Quality: Fine/Standard
109
VQT1C63
Others
Recording fi le format
Still Picture: JPEG (Design rule for Camera File system, based on Exif
2.21 standard), DPOF corresponding
Motion pictures: QuickTime Motion JPEG
Interface
Digital: USB 2.0 (Full Speed)
Analog video: NTSC/PAL Composite (Switched by menu)
Terminal
DIGITAL/V.OUT: Dedicated jack (8 pin)
DC IN: Type1 jack
Dimensions: 3.69˝(W) × 2.44˝(H) × 1.17˝(D)
(93.7 mm (W) × 62.0 mm (H) × 29.7 mm (D))
(excluding the projection part)
Weight: DMC-LS75:
Approx. 4.87 oz/138 g
(excluding Memory Card and battery)
Approx. 6.49 oz/184 g
(with Memory Card and battery)
DMC-LS70/DMC-LS60:
Approx. 4.76 oz/135 g
(excluding Memory Card and battery)
Approx. 6.38 oz/181 g
(with Memory Card and battery)
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity: 10 % to 80 %
110
VQT1C63
Others
Digital Camera Accessory System
Accessory# Figure Description
DMW-AC6 AC Adaptor
DMW-CLS75 Soft Case
DMW-CHTZ3 Semi Hard Case
RP-SDR04GU1K
RP-SDK02GU1A
RP-SDR02GU1A
RP-SDK01GU1A
RP-SDH01GU1A
RP-SDR01GU1A
RP-SDK512U1A
RP-SDR512U1A
RP-SDH256U1A
RP-SDR256U1A
RP-SD128BU1A
RP-SD064BPPA
4 GB SDHC Memory Card
2 GB SD Memory Card
2 GB SD Memory Card
1 GB SD Memory Card
1 GB SD Memory Card
1 GB SD Memory Card
512 MB SD Memory Card
512 MB SD Memory Card
256 MB SD Memory Card
256 MB SD Memory Card
128 MB SD Memory Card
64 MB SD Memory Card
• NOTE: Accessories and/or model numbers may vary by country. Please consult your
local dealer.
111
VQT1C63
Others
Digital Camera Accessory Order Form
(For USA Customers)
Please photocopy this form when placing an order.
1. Digital Camera Model #
2. Items Ordered
3. Method of payment (check one)
Check of Money Order enclosed (NO C.O.D.SHIPMENTS)
VISA Credit Card #
MasterCard Expiration Date
Discover Customer Signature
Make Check or Money Order to: PANASONIC ACCESSORIES
(Please do not send cash)
4. Shipping information (UPS delivery requires complete street address)
Accessory #
Description Price Each Quantity Total Price
Subtotal
Your State & Local Sales Tax
Shipping & Handling 6.95
Total Enclosed
Ship To:
Mr.
Mrs.
Ms.
First Last Phone#:
Day ( )
Street Address
Night ( )
City State Zip
TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY
ACCESSORY ORDER OFFICE
20421 84th Avenue South Kent, WA. 98032
In CANADA, please contact your local Dealer for more information about accessories.
112
VQT1C63
Others
Request for Service Notice (For USA Only)
Panasonic Camera and Digital Service Center
Please photocopy this form when making a request for service notice.
In the unlikely event this product needs service.
Mail this completed form and your Proof of Purchase along with your unit to:
Request for Service Notice:
(USA Only)
• Please include your proof of purchase.
(Failure to do so will delay your repair.)
• To further speed your repair, please provide
an explanation of what wrong with the unit
and any symptom it is exhibiting.
1590 Touhy Ave.
Elk Grove Village, IL 60007
113
VQT1C63
Others
Limited Warranty (For USA Only)
Panasonic Digital Still Camera
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto
Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the
period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new
or refurbished parts, or (b) replace it with a new or refurbished product. The
decision to repair or replace will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. You must carry-in or
mail-in your product during the warranty period. If non-rechargeable batteries are
included, they are not warranted. This warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as
is”. A purchase receipt or other proof of the original purchase date is required for
warranty service.
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
PANASONIC PUERTO RICO, INC.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto
Rico 00985
PRODUCT OR PART NAME PARTS LABOR
DIGITAL STILL CAMERA
(EXCEPT ITEMS LISTED
BELOW)
1 (ONE) YEAR 1 (ONE) YEAR
CCD 6 (SIX) MONTHS 90 (NINETY) DAYS
RECHARGEABLE BATTERY
PACK (IN EXCHANGE FOR
DEFECTIVE BATTERY PACK)
90 (NINETY) DAYS NOT APPLICABLE
SD MEMORY CARD
(IN EXCHANGE FOR
DEFECTIVE SD CARD)
90 (NINETY) DAYS NOT APPLICABLE
114
VQT1C63
Others
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call
1-800-272-7033.
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc.
(787)-750-4300 or fax (787)-768-2910.
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the warrantor,
or failures which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning
damage, modification, or commercial use (such as in a hotel, office, restaurant,
or other business), rental use of the product, service by anyone other than a
Factory Service Center or other Authorized Servicer, or damage that is
attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, travel to and
from the servicer, loss of media or images, data or other memory content. The
items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions
may not apply to you.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
115
VQT1C63
Others
Customer Services Directory (For USA Only)
For Product Information, Operating Assistance, Literature Request, Dealer
Locations, and all Customer Service inquiries please contact:
1-800-272-7033, Monday-Friday 8:30am-8pm EST.
Web Site: http://www.panasonic.com/consumersupport
You can purchase parts, accessories or locate your nearest
Service Center by visiting our Web Site.
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
PANASONIC SERVICE AND TECHNOLOGY COMPANY
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
Service in Puerto Rico
Panasonic Puerto Rico, Inc.:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone (787) 750-4300 Fax (787) 768-2910
As of March 2007
MAIL TO :
Product Repairs
Centralized Factory Service Center
Please carefully pack and ship, prepaid and insured, to the Elgin Centralized
Factory Service Center.
Customer’s in Puerto Rico, please ship or carry in to location below (“Service
in Puerto Rico”).
Panasonic Camera and Digital Service Center
Elk Grove Village, IL 60007
1590 Touhy Ave.
116
VQT1C63
Others
AVERTISSEMENT:
POUR RÉDUIRE TOUT RISQUE
D’INCENDIE, DE CHOC ÉLECTRIQUE
OU DE DOMMAGE,
* N’EXPOSEZ PAS CET APPAREIL
À LA PLUIE, À L’HUMIDITÉ, AUX
GOUTTES OU ÉCLABOUSSURES
ET ASSUREZ-VOUS QU’AUCUN
OBJET OU VASE REMPLI DE
LIQUIDE NE SOIT PLACÉ SUR
L’APPAREIL.
* N’UTILISEZ QUE LES
ACCESSOIRES RECOMMANDÉS.
* NE PAS RETIRER LE COUVERCLE
(OU LE PANNEAU ARRIÈRE) ;
AUCUNE PIÈCE INTERNE NE
PEUT ÊTRE RÉPARÉE PAR
LUTILISATEUR. CONFIER TOUTE
RÉPARATION À UN TECHNICIEN
QUALIFIÉ.
LA PRISE DE COURANT DOIT
SE TROUVER À PROXIMITÉ DE
L’APPAREIL ET ÊTRE FACILEMENT
ACCESSIBLE.
MISE EN GARDE
Une batterie de remplacement
inappropriée peut exploser. Ne
remplacez qu’avec une batterie
identique ou d’un type recommandé par
le fabricant. L’élimination des batteries
usées doit être faite conformément aux
instructions du manufacturier.
Une inscription se trouve en-dessous
de l’appareil.
• Si vous songez à utiliser des piles
rechargeables, les piles fabriquées par
Panasonic sont recommandées.
• Assurez-vous d’utiliser un adaptateur
secteur de marque Panasonic (modèle
DMW-AC6; en option).
• N’utilisez pas d’autres câbles de
connexion USB à l’exception de celui
fourni.
• N’utilisez pas d’autres câbles vidéo à
l’exception de celui qui est fourni.
• Conservez la carte mémoire hors de
portée des enfants afi n qu’ils ne puissent
pas l’avaler.
A propos des batteries
• N’exposez pas les piles à la fl amme ou à
la chaleur.
Précautions à prendre (pour les clients canadiens)
117
VQT1C63
Others
Évitez d’approcher l’appareil photo
de tout équipement magnétisé (four à
micro-ondes, téléviseur, équipement de
jeux vidéo, etc.).
• Si vous utilisez l’appareil sur ou proche
d’un téléviseur, les images de l’appareil
photo risquent d’être distordues par le
rayonnement électromagnétique.
• N’utilisez pas l’appareil à proximité des
téléphones cellulaires qui pourraient
créer du bruit vidéo sur les images.
•
Le puissant champ magnétique de haut-
parleurs ou de moteurs peut endommager
les données enregistrées sur support
magnétique et distordre les images.
• Le rayonnement électromagnétique
produit par les microprocesseurs peuvent
nuire au fonctionnement de l’appareil
photo et perturber les images.
•
Advenant le cas où le fonctionnement de
l’appareil serait dérangé ou interrompu
par un champ électromagnétique, coupez
le contact, retirez les piles ou débranchez
l’adaptateur secteur (DMW-AC6; en
option). Remettez l’appareil en marche.
N’utilisez pas l’appareil photo à
proximité d’un émetteur radio ou de
lignes à haute tension.
• L’utilisation de l’appareil photo à
proximité d’un émetteur radio ou de
lignes à haute tension pourrait perturber
les images enregistrées.
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
118
VQT1C63
Others
Index
A
AC adaptor .............................. 84, 87, 110
Access indication ................................... 24
Aerial photo mode ................................. 52
AF Assist Lamp ..................................... 66
AF/AE Lock ............................................ 27
AF Mode ................................................. 63
Alkaline batteries .................................... 11
Aspect ratio ............................................ 62
Auto Review .......................................... 21
Auto White Balance ............................... 60
Available recording time ...................... 106
B
Baby mode ............................................ 50
Backlight Compensation ........................ 29
Batteries ........................................... 11, 15
Battery type ............................................ 21
Beach mode .......................................... 51
Built-in Flash .......................................... 40
Built-in memory ...................................... 16
Burst Mode ............................................ 65
C
Calendar playback ................................. 68
Candle light mode .................................. 49
Card ............................................. 5, 15, 16
Color ...................................................... 26
Color mode ............................................ 66
Condensation .......................................... 5
Copy ...................................................... 82
D
Date Printing .................................... 78, 89
Date stamp ............................................ 75
Deleting Pictures ................................... 35
Demonstration of jitter/movement detection
screen ................................................ 64
DIAL DISPLAY ....................................... 23
Digital Zoom .......................................... 32
DPOF Print ............................................ 77
E
Easy zoom ............................................. 31
Economy mode ...................................... 22
Exposure ......................................... 26, 44
Exposure Compensation ....................... 44
Extended optical zoom .......................... 30
EZ .................................................... 30, 63
F
Favorites setting .................................... 73
File number ...................................... 22, 85
Fine ........................................................ 63
Fireworks mode ..................................... 52
Focusing ................................................ 26
Folder Composition ............................... 85
Folder number ................................. 22, 85
Food mode ............................................ 49
Formatting ............................................. 83
G
Guide line display .................................. 37
H
High angle mode ................................... 39
High sensitivity mode ............................. 51
Histogram .............................................. 38
I
ISO Sensitivity ....................................... 61
Intellingent ISO mode ............................ 45
J
Jitter ................................................. 27, 64
L
Language setting ................................... 23
LCD Monitor .......................... 4, 24, 37, 92
M
Macro mode ........................................... 46
Monitor ................................................... 22
Motion picture mode .............................. 53
Multi Playback ....................................... 67
N
Nickel metal hydride batteries .......... 11, 12
Night portrait mode ................................ 48
Night scenery mode ............................... 49
NO.RESET ............................................ 22
NTSC ............................................... 23, 91
119
VQT1C63
Others
Normal picture mode .............................. 25
Number of Prints .............................. 77, 89
Number of recordable pictures ...... 13, 104
O
Operational sound ................................. 22
Optical Image Stabilizer ......................... 64
Optical Zoom ......................................... 30
Oxyride batteries .................................... 11
P
Page layout ............................................ 90
PAL .................................................. 23, 91
Paper size .............................................. 89
Party mode ............................................ 49
PC .......................................................... 84
Pet mode ............................................... 50
PictBridge .............................................. 87
Picture Quality Setting (Simple Mode) .... 28
Picture Quality Setting (Motion Picture
Mode) ................................................ 53
Picture Size ........................................... 62
Playback Zoom ...................................... 69
Playing Back Motion Pictures ................ 70
Playing Back Pictures with a TV
Screen ............................................... 91
Portrait mode ......................................... 48
Power save ............................................ 21
Print mode ............................................. 87
Protect ................................................... 79
Q
Quality ................................................... 62
Quick setting .......................................... 59
R
Reset ..................................................... 23
Resize .................................................... 80
Review ................................................... 33
Rotate .................................................... 74
Rotate Display ....................................... 74
S
Scene mode .......................................... 47
Scenery mode ....................................... 48
Self-timer ............................................... 43
Setting Date/Time ............................ 17, 66
Setup Menu ........................................... 21
Simple Mode ........................................... 28
Slide Show ............................................. 72
Snow mode ............................................ 52
Soft skin mode ....................................... 48
Sports mode .......................................... 48
Standard ................................................ 63
Starry sky mode ..................................... 51
Status Indicator ...................................... 25
Strap ........................................................ 9
Sunset mode ......................................... 50
T
Thumbnail ............................................... 34
Travel date ....................................... 22, 55
Trimming ................................................ 81
TV ASPECT ........................................... 23
U
USB Connection Cable .................... 84, 87
V
Video cable ............................................ 91
Video Output .................................... 23, 91
W
White Balance ....................................... 60
White set ................................................ 60
World time ....................................... 22, 57
Z
Zoom ...................................................... 30
QuickTime and the QuickTime logo are trademarks or registered
trademarks of Apple Computer, Inc., used under license therefrom.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
© 2007 Matsushita Electric Industrial Co., Ltd.
VQT1C63-1
H1206CK1017
P
C
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC-LS70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC-LS70 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Lumix DMC-LS70

Panasonic Lumix DMC-LS70 User Manual - German - 112 pages

Panasonic Lumix DMC-LS70 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info