103516
114
Zoom out
Zoom in
Previous page
1/128
Next page
Others
114
Troubleshooting
Operational difficulties may be improved
by restoring the initial settings on the
[SETUP] menu. Select [RESET] on the
SETUP menu and reset the Setup
parameters.
1: The camera is not turned on.
1-1: Are the batteries inserted or the
AC adaptor (optional, DMW-AC1)
correctly connected? Check the
connection.
1-2: Are the batteries sufficiently
charged? Use sufficiently charged
batteries (when using Ni-MH
batteries). Replace them with new
batteries (when using Alkaline
batteries).
2: As the power is turned on, it turns
off immediately.
2-1: Is the battery power sufficient to
operate the camera? Charge the
batteries (when using Ni-MH
batteries). Replace them with new
batteries (when using Alkaline
batteries).
2-2: Are the batteries other than the
recommended ones?
2-3: The remaining battery life of the
Nickel Manganese battery cannot
be correctly displayed because of
its characteristics.
2-4: If you press the shutter button
halfway without enough power
remaining on the batteries, the
camera may be turned off. This is
a feature which helps to avoid
abnormal recordings due to
insufficient battery power, not a
malfunction. Replace the
batteries.
2-5: The Power Save is set before
shipment. Therefore, the camera
is turned off in 2 minutes if you do
not operate it. This is not a
malfunction. You can select it on
the setup menu.
3: The brightness of the screen
becomes dark or bright for a
moment.
3: This phenomenon appears when
pressing the shutter button
halfway to set the aperture value
and does not affect the recorded
pictures.
4: The picture cannot be recorded.
4-1: Is the card inserted?
4-2: Is the mode dial correctly set?
Check it.
4-3: There is no memory capacity left
on the card. Before recording,
delete some pictures.
5: The picture is not displayed on
the LCD monitor. (The power
indicator is lit.)
5-1: Is the LCD monitor set to OFF?
5-2: Does the economy mode work?
5-3: Is the built-in flash charging?
6: The LCD monitor is too bright
or dark.
6: Adjust the brightness of the LCD
monitor.
7: Flash does not light.
7: The flash mode is set to forced
OFF. Change the flash mode.
8: The focus range depends on
recording mode.
8-1: Set the mode dial to the mode
corresponding to the distance to
the subject.
8-2: Set the [AF TRIGGER] to
[].
9: The picture is not played back.
9-1: Is the card inserted?
9-2: Is there a picture in the card?
9-3: Is the mode dial set to playback
[]?
SHUTTER
DMC-LC80.book 114 ページ 2004年6月15日 火曜日 午後5時49分
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC-LC70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC-LC70 in the language / languages: English as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Lumix DMC-LC70

Panasonic Lumix DMC-LC70 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info