39916
112
Zoom out
Zoom in
Previous page
1/136
Next page
Connecting to other equipment
112
VQT1B38
Do not use any other USB connection
cables except the supplied one.
Do not disconnect the USB connection
cable while [ACCESS] is displayed.
If there are a lot of pictures on the built-in
memory or a card, it may take time to
transfer them.
It may not be possible to playback the
motion pictures on the built-in memory or
a card normally when this unit and the PC
are connected. Import the motion picture
files to the PC and then play them back.
If battery power is exhausted while the
camera and the PC are communicating,
the recorded data may be damaged.
When you connect the camera to the PC,
use a battery with sufficient battery power
(P27) or the AC adaptor (DMW-AC7E;
optional).
If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator blinks
and the alarm beeps. In this case, stop
the communication at once on the PC.
When connecting the camera to a
“Windows 2000” OS PC with the USB
connection cable, do not replace the
card while the camera and the PC are
connected. The information on the card
may be damaged. Use “Safely Remove
Hardware” in the task tray on your PC
when replacing the card.
Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P37), multi playback (P91) and calendar
playback (P92).
Read the operating instructions for the
PC.
If a card is not inserted when the camera
is connected to the PC, you can edit or
access the pictures on the built-in
memory. If a card is inserted, you can edit
or access the pictures on it.
You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the PC again.
The message [PLEASE RE-CONNECT
THE PRINTER.] appears if you change
the mode dial to [ ] while the camera
and the PC are connected. If a printer is
connected, change the mode to a mode
other than [ ] mode and then check that
no data is being transferred. ([ACCESS]
appears on the LCD monitor of the
camera while data is being transferred.)
DMC-FZ8_EB ENG.book 112 ページ 2006年12月27日 水曜日 午後6時2分
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC-FZ8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC-FZ8 in the language / languages: English as an attachment in your email.

The manual is 11,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Lumix DMC-FZ8

Panasonic Lumix DMC-FZ8 User Manual - German - 144 pages

Panasonic Lumix DMC-FZ8 User Manual - German - 25 pages

Panasonic Lumix DMC-FZ8 User Manual - German, Dutch - 120 pages

Panasonic Lumix DMC-FZ8 User Manual - Dutch - 144 pages

Panasonic Lumix DMC-FZ8 User Manual - French, Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info