503493
117
Zoom out
Zoom in
Previous page
1/130
Next page
Others
- 117 -
[READ ERROR PLEASE CHECK THE CARD]/
[WRITE ERROR PLEASE CHECK THE CARD]
It has failed to read or write data.
Turn the camera off and remove the card. Insert the card again, turn the power on,
and try to read or write the data again.
The card may be broken.
Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
When you set the picture quality to [WVGA] or [VGA], we recommend using a high-
speed card with “10 MB/s” or greater displayed on the package.
If the operation stops even if you use the card with memory size of 10 MB/s or greater,
this means the data-writing speed has lowered. We recommend backing up the data and
formatting the card. (P27)
Depending on the type of SD Memory Card or SDHC Memory Card, motion picture
recording may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there are no remaining folder numbers that can be
used. (P98)
Format the card after saving necessary data on a PC etc. (P27)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
The AV cable is connected to the camera.
Press [MENU/SET] if you want to delete this message at once.
Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P27)
This message also appears when the USB connection cable is connected to the camera
only. In this case, connect the other end of the USB connection cable to a PC or a
printer. (P96, 99)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
The printer cannot print.
Check the printer.
[NO BATTERY POWER REMAINS]
The remaining battery power is low.
Charge the battery.
[THIS BATTERY CANNOT BE USED]
The battery cannot be recognized by the camera.
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
The battery cannot be recognized as its terminal is dirty.
Remove any dirt etc. from the terminal.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Lumix DMC-F2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Lumix DMC-F2 in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Lumix DMC-F2

Panasonic Lumix DMC-F2 User Manual - German - 130 pages

Panasonic Lumix DMC-F2 User Manual - Dutch - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info