39160

Panasonic KXTCD440 Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
30 Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333
Multi-unit Operation
Multi-unit Operation
Operating additional units
Additional handsets
Up to 6 handsets can be registered to a
single base unit. Additional handsets will
give you the freedom to, for example, have
an intercom call with another handset while
a third handset is on an outside call. See
page 3 for information on ordering additional
handsets.
Additional base units
Handsets can be registered to up to 4 base
units, allowing you to add additional base
units and extend the area in which your
handset(s) can be used. If a handset moves
out of range of its base unit when “AUTO” is
selected on base unit selection (page 31), it
will look for another base unit to make or
receive calls. A base unit and the handsets
it communicates with is called a “radio cell”.
Note:
L Calls will be disconnected when the
handset moves from one radio cell to
another.
L Intercom calls and call transfers are only
possible between handsets in the same
radio cell.
Registering a handset to a
base unit
To register an additional handset to a
base unit (easy registration)
The included handset and base unit are
preregistered. After purchasing an
additional handset, register it to the base
unit using the following method.
1 Lift the additional handset and press
{ih}.
2 Press and hold {x} on the left side of the
base unit for about 5 seconds, until the
registration tone sounds.
3 Place the additional handset on the base
unit. The registration tone continues to
sound. With the handset still on the base
unit, wait until a confirmation tone sounds
and w stops flashing.
Note:
L If an error tone sounds, or if w is still
flashing, register the handset manually
(manual registration).
L If all registered handsets start ringing in
step 2, press {x} to stop, then start again.
L Charge the batteries of your additional
handset for about 7 hours before initial
use.
To register a handset to an additional
base unit (manual registration)
You can register a handset to a base unit
manually using the following method.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING HS”, then press {>}.
3 Press {v} repeatedly to display
“REGISTRATION”, then press {>}.
4 Press {v} repeatedly to display
“REGISTER HS”, then press {>}.
5 Press and hold {x} on the left side of the
base unit for about 5 seconds, until the
registration tone sounds.
L After pressing {x}, the rest of the
procedure must be completed within
1 minute.
6 Press {v} repeatedly to select a base
unit number, then press {>}.
7 Wait until “BS PIN” is displayed, then
enter “0000” (default base unit PIN).
L If you changed PIN, enter it (page 22).
8 Press {>}.
L When the handset has been registered
TCD440_445E.book Page 30 Friday, February 27, 2004 4:22 PM
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KXTCD440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KXTCD440 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info