16783
68
Zoom out
Zoom in
Previous page
1/92
Next page
Frequently Asked Questions
68
For fax advantage assistance, call 1-800-435-7329.
L Try copying the document. If the copied
image is clear, there may be something
wrong with the other partys machine.
The other party complains that smudges or
black lines appear on their received
document.
L The white plate or scanner glass are dirty.
Clean them (page 74).
I cannot send a fax overseas.
L Use the overseas transmission mode of
feature #23 (page 61).
L Add two pauses at the end of the telephone
number or dial manually.
Fax receiving
I cannot receive documents.
L The telephone line cord is connected to the
EXT jack on the unit. Connect to the LINE
jack (page 15)
L When you have a single telephone line and
subscribe to a voice mail service, you must
also subscribe to a Distinctive Ring service
(page 53).
I cannot receive documents automatically.
L The receiving mode is set to TEL mode. Set
to FAX ONLY mode by pressing
{
{{
{RECEIVE MODE}
}}
}.
L The time taken to answer the call is too long.
Decrease the number of rings of feature #06
(page 60).
The display shows the following, but faxes
are not received.
CONNECTING.....
L The incoming call is not a fax. Change the
receiving mode to TEL mode by pressing
{
{{
{RECEIVE MODE}
}}
}.
A blank sheet is ejected.
L If a blank sheet is ejected after the received
document is printed out, the receiving
reduction rate is not programmed correctly.
Program the proper rate in feature #36 (page
62).
L The other party placed the document in their
fax machine the wrong way. Check with the
other party.
A white line or a smudge appears on your
recording paper.
L The thermal head is dirty. Clean it (page 76).
The printing quality is poor.
Note:
Please do not reuse the ink film!
Replace with Model No. KX-FA94 replacement
film. Refer to page 6 for further details.
L The other party sent a faint document. Ask
them to send a clearer copy of the document.
L The thermal head is dirty. Clean it (page 76).
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
L You may have used paper with a cotton
and/or fibre content that is over 20%, such as
letterhead or resume paper. We recommend
smooth paper such as Hammermill Jet Print
for clearer printing.
The other party complains that they cannot
send a document.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 14)
or clear the jammed paper (page 70).
Receiving mode
I cannot select the desired receiving mode.
L If you want to set FAX ONLY mode, press
{
{{
{RECEIVE MODE}
}}
} repeatedly until FAX
ONLY mode is displayed.
L If you want to set TEL mode, press
{
{{
{RECEIVE MODE}
}}
} repeatedly until TEL
mode is displayed.
L The Distinctive Ring of feature #31 is
activated (page 53).
The other party complains that they cannot
send a document.
L The unit is not in FAX ONLY mode. Press
{
{{
{RECEIVE MODE}
}}
} repeatedly until FAX
ONLY mode is displayed.
Copying
The unit does not make a copy.
L You cannot make a copy during
programming. Make the copy after
programming or stop programming.
A black line, a white line or a smudge
appears on the copied document.
L The white plate or scanner glass are dirty.
Clean them (page 74).
The copied image is distorted.
L The thermal head is dirty. Clean it (page 76).
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KXFB421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KXFB421 in the language / languages: English as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info