628266
133
Zoom out
Zoom in
Previous page
1/172
Next page
Note
If
one of the other parties is using a software
version older than 2.30 (not including 2.30),
"Motion" will be selected.
"Max Resolution": Press [Enter] and use [
]
[ ]
to select the maximum display resolution of the
main video camera and sub video camera used
during a video conference call.
"Full HD": Maximum resolution: 1920 ´ 1080
"HD": Maximum resolution: 1280 ´ 720
"Auto": This mode selects either "Full HD" or
"HD" according to the available bandwidth.
Note
Selecting "Auto"
or "HD" is recommended.
If you are using the KX-VC300 and you want
to set "Max Resolution" to "Full HD" or set
"Video Quality" to "Motion" to set "Max
Resolution" to "Auto", you must purchase
an activation key card (KX-VCS401) to
enable sending images in Full HD
resolution (Page 127).
When "Video Quality" is set to
"Sharpness", "Full HD" and "HD" are
fixed at the maximum resolutions. If you
want to change the resolution to suit the
network conditions, select "Auto".
If you are using a network with narrow
bandwidth or if you select a low bandwidth
setting, video display may be delayed if
"Video Quality" is set to "Sharpness".
When "Video Quality" is set to "Motion"
and "Full HD" is selected, if the other party
has a low bandwidth, the display resolution
may be lower than when "HD" or "Auto" is
selected.
When making a 3-party video conference
call, the main video camera will be
automatically set to "HD", even if you have
specified "Full HD".
When making a 4-party video conference
call, the main video camera and sub video
camera will be automatically set to "HD",
even if you have specified "Full HD".
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
"IP Address": Use [
][ ] to select whether the
IP address information for the local site ("IP
Address", "Subnet mask", "Default Gateway")
will be obtained automatically from a DHCP server
or will be set manually.
"Auto": Obtain the IP address information
automatically.
"Manual" (default): Set the IP address
information manually.
Note
Even if you have selected "Auto", you still
may not be able to acquire an IP address
due to problems such as network
congestion. In this case, "Address is not
assigned"
is displayed in the upper right of
the Home screen. Contact your network
administrator.
To select "Auto", "Static NAT" must be set
to "OFF".
"IP Address": Enter the IP address for the local
site.
"Subnet mask": Enter the subnet mask.
"Default Gateway": Enter the IP address of the
default gateway.
Note
"IP Address", "Subnet mask", and
"Default Gateway" can be entered only if
"IP Address" is set to "Manual".
If the value for "IP Address", "Subnet
mask",
or "Default Gateway" contains 1 or
2 digits numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
Correct entry: [192.168.0.1]
Wrong entry: [192.168.000.001]
"DNS Server": Use [
][ ] to select whether the
IP address information for the DNS servers
("Primary DNS Server
", "Secondary DNS
Server") will be obtained automatically from a
DHCP server or will be set manually.
"Auto": Obtain the IP address information
automatically.
"Manual" (default): Set the IP address
information manually.
Note
To select "Auto", "IP Address" must be
set to "Auto".
"Primary
DNS Server": Enter the IP address of the
primary DNS server.
"Secondary DNS Server": Enter the IP address of
the secondary DNS server.
Document Version 2013-09 User Manual 133
Contacts and Settings
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info