628266
100
Zoom out
Zoom in
Previous page
1/172
Next page
automatically set to "HD",
even if you have
specified "Full HD".
When making a 4-party video conference
call, the main video camera and sub video
camera will be automatically set to "HD",
even if you have specified "Full HD".
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
"Quality of Service": Use [
][ ] to select
between prioritising sound or images when
bandwidth is low or the network is congested.
"Audio" (default): When bandwidth is low
sound quality is prioritised, and when the
network is congested sound disturbance is
reduced.
"Video": Even when bandwidth is low or the
network is congested, image quality is
prioritised.
Note
The value that you select here does not
influence the unit
’s operation when you
connect to an MCU or non-Panasonic video
conference system.
If one of the other parties is using a software
version older than 2.30 (not including 2.30),
"Audio" will be selected.
"Audio only mode": Use [
][ ] to select
whether to use only audio communication
(Audio-only mode) when bandwidth is limited or
when there is network congestion. When in
Audio-only
mode, your image is not sent to the other
party. Instead, a blue screen is sent.
"ON": Communication will become audio only
if there is limited bandwidth or network
congestion.
"OFF" (default): Communication will not
become audio only, even if there is limited
bandwidth or network congestion.
Note
To
select "ON", "Quality of Service" must
be set to "Audio".
Contents cannot be shared while in Audio
only mode.
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
When one of the other parties is using a
software version older than 2.30 (not
including 2.30), communication will not
become audio only even if "Audio only
mode" is set to "ON".
When
changing to Audio-only mode, it may
take some time for the blue screen to be
displayed. Until the blue screen is
displayed, the image may become
distorted.
"Still image quality": Use [
][ ] to select the
display
resolution to use when you send still images
from the sub video camera to other parties.
"Full HD" (default [for KX-VC600]): The
resolution of still images is Full HD.
"HD" (default [for KX-VC300]): The resolution
of still images is HD.
Note
The value that you select here does not
influence the unit
’s operation when you
connect to an MCU or non-Panasonic video
conference system.
If the network has low bandwidth and a high
rate of packet loss, selecting "HD" is
recommended. For details, contact your
dealer.
If you are using the KX-VC300, "Full HD"
can only be selected after purchasing an
activation key card (KX-VCS401) to enable
sending images in Full HD resolution
(Page 127).
During a 4-party video conference call, the
display resolution will be "HD", even if you
have specified "Full HD".
"Default MIC Mute set": Use [
][ ] to select
whether
to mute the microphone(s) at the start of a
received video conference call.
"ON": Mutes the microphone(s).
"OFF" (default): Does not mute the
microphone(s).
"Call Limit time": Enter the maximum length of
time for the duration of a video conference call (in
hours and minutes).
Note
If you set 0 hours 0 minutes (default), the
call time is unlimited.
If the duration of a video conference call
exceeds
the specified length of time, the call
will be automatically disconnected.
"MIC detection": Use [
][ ]
to select whether to
enable the detection of the connection status of the
Boundary Microphones or headset.
100 User Manual Document Version 2013-09
Contacts and Settings
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-VC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-VC300 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info