520237

Panasonic KX-UT670 Manual

55
Zoom out
Zoom in
Previous page
1/146
Next page
Transferring a Call
Transferring after the Destination
Answers
1. During a call, tap [Transfer] on the [Current] tab.
2. Call the party to whom you want to transfer the call.
3. When the destination party answers, tap [Transfer
Complete].
Note
• For details about making a call, see page 51.
• In step 1, instead of tapping [Transfer], you can
tap a flexible button assigned as a BLF button
to call the transfer destination.
• If On-hook Transfer is enabled at your unit, you
can simply go on-hook in step 3 instead of
tapping [Transfer Complete]. For details,
consult your administrator or dealer.
• In step 3, instead of tapping [Transfer
Complete], you can tap [Swap] to put the
transfer destination on hold and talk to the party
you are transferring. Tapping [Swap] again
returns you to the transfer destination.
• If the transfer destination does not answer,
either tapping [Transfer Cancel] or tapping the
DN flexible button for the call on hold (flashing
green slowly) returns you to the original call.
• In step 3, the call will still be transferred even if
you go on-hook before the transfer destination
answers.
Transferring without Waiting for a
Response from the Destination
(Blind Transfer)
*1
You can transfer a call to the transfer destination
directly, without waiting a response from the
destination.
1. During a call, tap [Blind Transfer] on the
[Current] tab.
2. Enter the transfer destination’s phone number, and
then press
.
3. Go on-hook.
Note
• For details about making a call, see page 51.
• In step 2, tapping [Transfer Cancel] before
pressing
returns you to the original
call.
*1
If the unit is connected to a Panasonic KX-NS1000 PBX, you
cannot transfer a call.
Three-party Conference
Call
During a two-party call, you can add a third party and
establish a conference call.
1. During a call, tap [Conference] on the [Current]
tab.
2. Call the party you want to add to the call.
3. When the third party answers, tap [Start
Conference], and the three-party conference
begins.
Note
• For details about making a call, see page 51.
• If party you are adding to the call does not
answer, tapping the DN flexible button of the call
on hold (flashing green slowly) returns you to
the two-party call.
• If the unit is connected to a Panasonic
KX-NS1000 PBX, you can add one or more
parties to your three-party conference call. For
details, refer to the documentation of the
KX-NS1000.
Removing a Party from the
Conference
To hold one party and talk with the other
You can put one of the parties on hold and establish a
two-party call with the other party. It is also possible to
return to the three-party conference.
1. During a three-party conference call, select the
party you want to put on hold on the [Current] tab.
2. Tap [Hold].
Note
• You can return to the three-party conference by
tapping [Start Conference] after step 2.
• If you tap [Hold] without selecting a party, both
of them are put on hold.
• If the unit is connected to a Panasonic
KX-NS1000 PBX, you cannot remove a party
from the conference.
To disconnect one party and continue talking
with the other
You can remove one of the parties from the conference
and return to a two-party call.
1. During a three-party conference call, select the
party you want to remove on the [Current] tab.
2. Tap [Disconnect].
Document Version 2012-12 Operating Instructions 55
Phone
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-UT670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-UT670 in the language / languages: English as an attachment in your email.

The manual is 8,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic KX-UT670

Panasonic KX-UT670 User Manual - German - 164 pages

Panasonic KX-UT670 User Manual - Dutch - 154 pages

Panasonic KX-UT670 User Manual - French - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info