734787
54
Zoom out
Zoom in
Previous page
1/60
Next page
Making/answering calls, intercom
Problem Cause/solution
is displayed. RThe handset is too far from the base unit. Move closer.
RThe base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
RThe handset is not registered to the base unit. Register it
(page 39).
RActivating eco mode reduces the range of the base unit in
standby mode. If required, turn eco mode off (page 16).
Noise is heard, sound cuts
in and out.
RYou are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
RMove closer to the base unit.
RIf you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
Sound quality seems to be
getting worse.
RYou have registered a handset that is not recommended. The
clearest sound quality is only possible by registering the
provided handset.
The handset does not ring. RThe ringer volume is turned off. Adjust ringer volume (page 17,
31).
RDo not disturb mode is turned on. Turn it off (page 35).
RIf the handset is registered to multiple base units, the handset
may not be able to make or receive calls or communicate with
the base unit when the following conditions are met.
Eco mode is set to Eco Plus (page 16).
Base unit selection is set to Auto (page 33).
In this case, place the handset near the base unit, then press
MECON and select Eco or Eco Off. Repeat for each base
unit.
The base unit does not
ring.
RThe ringer volume is turned off. Adjust ringer volume (page 17,
31).
I cannot make a call. RYou dialled a call restricted number (page 38).
RThe key lock feature is turned on. Turn it off (page 19).
Caller ID/Talking Caller ID
Problem Cause/solution
Caller information is not
displayed.
RYou must subscribe to a Caller ID service. Contact your phone
service provider for details.
RIf your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
RIf you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
ROther telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
54 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Useful Information
54


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-kx-tgj423e

Reset search

  • Can you answer this question on the Panasonic KXTGC423 – Does it show callers name as well as phone number if it’s already entered in the phone directory?
    Thank you
    grahamedwards2000@yahoo.co.uk Submitted on 1-9-2023 at 11:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGJ423E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGJ423E in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info