2 MbN:
Select a base unit number. a MOKN
R This number is used by the handset as
a reference only.
3 Base unit:
Press and hold MLOCATORN for about 5
seconds.
R If all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step.
4 Handset:
MOKN a Wait until “Base PIN” is
displayed. a Enter the base unit PIN
(default: “0000”). a MOKN
R If you forget your PIN, see page 51.
Selecting a base unit
W
hen “Auto” is selected, the handset
automatically uses any available base unit it is
registered to. When a specific base unit is
selected, the handset makes and receives
calls using that base unit only. If the handset is
out of range of that base unit, no calls can be
made.
1 MMENUN (right soft key) #137
2 MbN: Select the desired base unit number,
or “Auto”. a MOKN
Important:
R When viewing the phonebook, caller list,
etc., only the entries that are stored in the
base unit that the handset is currently
connected to are displayed.
Deregistering a handset
A
handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1 MMENUN (right soft key) #131
R All handsets registered to the base unit
are displayed.
2 MbN: Select the handset you want to
cancel. a MOKN
3 MbN: “Yes” a MOKN a MOFFN
Cancelling a base unit
A
handset can cancel a base unit that it is
registered to. This allows the base unit to end
its wireless connection with the system.
1 MMENUN (right soft key) #139
2 MbN: Select the base unit you want to
cancel. a MOKN
3 MbN: “Yes” a MOKN a MOFFN
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 MM
ENUN (right soft key) #138
2 MbN: Select the desired setting. a MOKN
a MOFFN
Registering the DECT repeater
(
KX-A405/KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Press and hold MLOCATORN for about 5
seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and indicator light
g
reen.
36
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming