Error messages
Display message Cause/solution
Base no power
o
r
No link to base.
Reconnect main
base AC adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 35).
Check
P
hone Line
R T
he supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 9).
Error
R R
ecording was too short. Try again.
Memory Full
R T
he phonebook memory is full. Erase unwanted entries
(page 21).
R Message memory is full. Erase unwanted messages
(page 41, 42).
R The call block list memory is full. Erase unwanted entries
(page 31).
Use
r
echargeable
battery.
R A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 3, 6.
You must first
s
ubscribe
to Caller ID.
R You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
Troubleshooting
I
f you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the
handset.
49
Useful Information
