– Android phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
manager]
*1
must be turned on.
– Handset or base unit: “Alert On/
Off” must be turned on (page 58).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device’s
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R An Android device (Android 2.1 or later)
Text message (SMS) alert
For iPhone and BlackBerry
®
users
This feature alerts you on your DECT phone
when your paired mobile phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your mobile phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset or base unit: “Alert On/
Off” must be turned on (page 58).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
Alert settings for your
DECT phone
If your mobile phone is paired to the base unit
and receives notifications, the handset and/or
base unit can alert you:
– by briefly displaying a message
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
to enable the desired alerts (page 57).
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset and base unit when your
mobile phone receives notifications.
– “On” (default): The handset and/or base
unit alert you.
– “Off”: The handset and/or base unit do
not alert you.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1 For MOBILE 1: MMENUN#6101
For MOBILE 2: MMENUN#6102
2 MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R In step 1, you can also enter the “Alert
settings” menu by pressing and holding
MAPP ALERTSN on the base unit.
Setting the voice alert
You can turn on/off the voice alert.
– “On” (default): The handset and/or base
unit notify you by voice announcement.
– “Off”: Voice announcement is not
available as alert.
58
Using Bluetooth® Devices
