734842
33
Zoom out
Zoom in
Previous page
1/56
Next page
Other programming
Changing the handset name
The default handset name is Handset 1 to
Handset 3. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 33).
1MMENUN#104
2Enter the desired name (10 characters
max.).
3MOKN a MN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is Off.
1MMENUN#105
2MbN: Select the desired setting. a MOKN
a MN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1MMENUN#256
2Enter the base unit PIN (default: 0000).
RIf you forget your PIN, see page 47.
3Select the handsets to be restricted by
pressing 1 to 3.
RAll handsets registered to the base unit
are displayed.
R ” is displayed next to the selected
handset numbers.
RTo cancel a selected handset, press
the same dial key again.
disappears.
4MOKN
5MbN: Select a memory location. a MOKN
6Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MN
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
Enhanced. When Enhanced is selected,
is displayed. The default setting is
Normal.
1MMENUN#729
2MbN: Selected the desired setting. a MOKN
3MN
Note:
RIf you set repeater mode to On
(page 34):
Security is set to Normal and is
displayed.
Security is not displayed in the
display menu (page 27).
RWhen enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
RIf you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 47.
1MMENUN#132
2Enter the current 4-digit base unit PIN
(default: 0000).
3Enter the new 4-digit base unit PIN. a
MOKN
4MbN: Yes a MOKN a MN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 33
Programming
TGE72xE_0221_ver005.pdf 33 2019/02/21 14:47:46
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGE723E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGE723E in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info