588754
32
Zoom out
Zoom in
Previous page
1/68
Next page
*2 If you program these settings using one of the units, you do not need to program the same
i
tem using another unit.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 KX-TGE240 series: page 3
*5 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select Caller ID auto. To turn this feature off, select
Manual. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*6 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
3). If you select a melody, you cannot distinguish lines by their ringers.
*7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*8 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*9 For models with supplied key detectors, the display shows1: Detector1”.
*10 If you register 2 or more key detectors.
*11 If you have 2 or more key detectors.
*12 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*13 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to
pick up the waiting call.
*14 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to A if telephone line condition is not good.
Alarm
A
n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 14).
1 MMENUN#720
2 Select an alarm by pressing 1 to 3. a
MSELECTN
3 MbN:
Select the desired alarm option. a
MSELECTN
O
ff
Turns alarm off. Go to step 10.
O
nce
An alarm sounds once at the set time.
D
aily
An alarm sounds daily at the set time.
Go to step 5.
W
eekly
Alarm sounds weekly at the set time(s).
4 P
roceed with the operation according to
your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
32
For assistance, please visit http://www.panasonic.com/help
Programming
TGE21x23x24x(en)_1122_ver031.pdf32 32 2013/11/22 14:22:28
32


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-kx-tge232

Reset search

  • How to set up for roll over to voice mail when I am on the phone?
    Submitted on 22-2-2022 at 23:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KX-TGE232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KX-TGE232 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info