Using the Smart Function Key
P
ress M
N
to answer the page.
Turning auto intercom on/off
T
his feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press M
N.
When this
feature is set to “On”, the monitoring handset
for the baby monitor feature (page 33) will
also answer baby monitor calls automatically.
The default setting is “Off”.
1 MMENUN#273
2 MbN: Select the desired setting. a MOKN
a M
N
Key lock
T
he handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press MMENUN for about 3
seconds.
R To turn key lock off, press M
N for about
3 seconds.
Note:
R Calls to emergency numbers cannot be
made until key lock is turned off.
Power back-up operation
W
hen a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
“Power Failure” and the default setting is
“Auto” (page 28).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press
”
or “Press
”
is
displayed. After pressing M N
on the
handset, place it on the base unit to start
power back-up mode.
R Power back-up mode will not work if the
battery level of the power supplying
handset is
/ .
R D
o not lift the power supplying handset
from the base unit during power back-up
mode.
R If “Please wait for 1 minute.” is
displayed, please do not operate the unit
until the message disappears.
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 2 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 3 hours
max.
– Not in use in power back-up mode: 3 hours
max.
Making calls during a power
f
ailure
n When only 1 handset is registered:
1 Lift the handset and dial the phone
number.
2 Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
3 When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4 When you finish talking, press M
N.
n W
hen 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying power, and use another
handset for making calls.
19
Making/Answering Calls
